|
User manual for ACTi V22 1-Channel 960H/D1 H.264 Video Encoder with Analog V22
- Manufacturer: ACTi
- Basic description and contents of package
- Product classification: Surveillance - Surveillance Video - Video Transmission - Video Encoders & Decoders
- Safety instructions
- Startup and operation of the video encoders & decoders
- Tips for setting up your ACTi
- Settings and expert assistance
- Contact ACTi service
- Troubleshooting
- Warranty information
- Price: 391 USD
|
We recommend checking out our discussion threads on the ACTi V22 1-Channel 960H/D1 H.264 Video Encoder with Analog V22,
which address similar problems with connecting and setting up Video Encoders & Decoders ACTi.
|
User manual for the ACTi V22 1-Channel 960H/D1 H.264 Video Encoder with Analog V22
The user manual for the ACTi V22 1-Channel 960H/D1 H.264 Video Encoder with Analog V22 provides
necessary instructions for the proper use of the product Surveillance - Surveillance Video - Video Transmission - Video Encoders & Decoders.
The ACTi V22 1-Channel 960H/D1 H.264 Video Encoder with Analog Video Output allows the integration of a single analog CCTV camera in an already existing IP infrastructure. H.264 compression technology allows you to save on storage space while also minimizing the bandwidth requirement for operations. This encoder is capable of simultaneous dual streaming of videos in up to D1 resolutions at 25/30 fps in H.264 and MJPEG formats. It features a microSDHC memory card slot (card not included) for on-board storage.
|
If you own a ACTi video encoders & decoders and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the ACTi V22 1-Channel 960H/D1 H.264 Video Encoder with Analog V22 in the following formats:
- *.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
|
Additional parameters of the ACTi V22 1-Channel 960H/D1 H.264 Video Encoder with Analog V22:
Type | Video encoder | Number of Channels | 1 | Protocol | Sony VISCA, Pelco-D, Pelco-P | Control | Remote manual control; 32 preset points; 10 preset tours | Compression | H.264, MJPEG | Maximum Frame Rate vs. Resolution | 30 fps at 960 x 480 (NTSC); 25 fps at 960 x 576 (PAL) 30 fps at 720 x 480 (Full D1, NTSC); 25 fps at 720 x 576 (Full D1, PAL) | Multi-Streaming | Simultaneous dual streams based on two configurations | Bit Rate | 28 kb/s to 6 Mb/s (per stream) | Bit Rate Mode | Constant, Variable | Image Enhancement | Brightness; Saturation; Contrast; Hue; Sharpness; Deinterlacing | Privacy Masking | 4 regions | Text Overlay | User defined text on video | Image Orientation | Image flip; image mirror | Compression | 8 kHz, Mono, PCM, 16-bit encoding, G.711 | Audio Input | 1, via terminal block | Audio Output | 1, via terminal block | Protocols | TCP, UDP, HTTP, HTTPS, DHCP, PPPoE, RTP, RTSP, IPv6, DNS, DDNS, NTP, ICMP, ARP, IGMP, SMTP, FTP, UPnP, SNMP, Bonjour, Sony VISCA, Pelco D, Pelco P | Ethernet Port | 1 x 10/100 Base-T Ethernet, RJ45 connector | Security | IP address filtering; HTTPS encryption; Password protected user levels; Anonymous login | Alarm Triggers | Video motion detection (3 regions); External device through digital input | Alarm Response | Notify control center; Go to PTZ preset point or preset tour; Change camera settings; Command other devices; E-mail notification with snapshots; Save video or snapshot to local storage, Upload video, snapshot to FTP server; Activate external device through digital output | Analog Video Input | 1 x CVBS, 1 Vpp with 75 Ω BNC connector | Analog Video Output | 1 x CVBS, 1 Vpp with 75 Ω BNC connector | Digital Input | 1, via terminal block | Digital Output | 1, via terminal block | Serial Port | RS-485, RS-422, RS-232, terminal block | Local Storage | microSDHC/SDXC memory card slot (card not included) | Unified Solution | Fully compatible with ACTi software | ISV Integration | Software Development Kit (SDK) available; ONVIF compliant | Firmware Access Browser | Microsoft Internet Explorer 8.0 or newer (full functionality); Safari with QuickTime installed, and other browsers with VLC installed (partial functionality) | Power Source | PoE Class 3 (IEEE802.3af) 12 VDC (adapter not included) | Power Consumption | PoE: 3.36 W 12 VDC: 3 W | Operating Temperature | -40 to 158°F (-40 to 70°C) | Operating Humidity | 10 to 85% RH | Approvals | CE (EN 55022 Class B, EN 55024), FCC (Part15 Subpart B Class B) | Dimensions (W x H x D) | 5.4 x 1.4 x 4.8" (137.0 x 35.5 x 121.8 mm) | Weight | 0.977 Ib (0.442 kg) | |
The user manual for the ACTi V22 1-Channel 960H/D1 H.264 Video Encoder with Analog V22 can be downloaded in .pdf
format if it did not come with your new video encoders & decoders, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other ACTi users keep a unique electronic library
for ACTi video encoders & decoderss,
where you can use our link to download the user manual for the ACTi V22 1-Channel 960H/D1 H.264 Video Encoder with Analog V22.
The user manual lists all of the functions of the ACTi V22 1-Channel 960H/D1 H.264 Video Encoder with Analog V22,
all the basic and advanced features and tells you how to use the video encoders & decoders.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from ACTi service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the ACTi V22 1-Channel 960H/D1 H.264 Video Encoder with Analog V22. User manuals are also
available on the ACTi website under Surveillance - Surveillance Video - Video Transmission - Video Encoders & Decoders.
Question and answer discussion forum concerning user instructions and resolving problems with the ACTi V22 1-Channel 960H/D1 H.264 Video Encoder with Analog V22 - no comments have been made yet - be the first to add a comment
Post new comment/question/response regarding the ACTi V22 1-Channel 960H/D1 H.264 Video Encoder with Analog V22
|
|
|
|
|