|
User manual for Arri SkyPanel S30-RP Daylight LED Remote Phosphor L0.0007727
- Manufacturer: Arri
- Basic description and contents of package
- Product classification: Lighting & Studio - Continuous Lighting - LED Lights
- Safety instructions
- Startup and operation of the led lights
- Tips for setting up your Arri
- Settings and expert assistance
- Contact Arri service
- Troubleshooting
- Warranty information
Click to enlarge image
|
We recommend checking out our discussion threads on the Arri SkyPanel S30-RP Daylight LED Remote Phosphor L0.0007727,
which address similar problems with connecting and setting up LED Lights Arri.
|
User manual for the Arri SkyPanel S30-RP Daylight LED Remote Phosphor L0.0007727
The user manual for the Arri SkyPanel S30-RP Daylight LED Remote Phosphor L0.0007727 provides
necessary instructions for the proper use of the product Lighting & Studio - Continuous Lighting - LED Lights.
ARRI continues to broaden their LED line and reaffirm their commitment to accurate color rendering with the introduction of the black SkyPanel S30-RP Daylight LED Remote Phosphor Softlight. Supported by a pole operated aluminum yoke, the panel's surface area measures 14 x 11.8", making it an ideal portable, on-the-go light source for mobile applications. Output is controlled via interchangeable phosphor panels to achieve a specific Kelvin temperature instead of adding phosphors to blue LEDs. The powerful native LEDs then excite the phosphor panel that's mounted like a filter in front of the fixture. This method not only uses less electronics resulting in a lower price point, but delivers a color rendition that approaches current definitions of "perfection" and is 10% brighter than its color tuneable S30-C counterpart, which has an output equivalent to a 1,000W tungsten softlight. Both versions of the light draw only 240W. This rendition of the light ships with a 5,600K panel with an impressively high CRI of 94, but optional 2,700K, 3,200K, 4,300K and 6,500K phosphor panels with CRIs of 93, 94, 97 and 98 respectively are available, as well as a Chroma Green panel. Dimming from 0-100% can be adjusted locally with the SkyPanel's onboard controller or remotely via DMX or over a LAN. Besides inputs and outputs appropriate to these functions, The light has a USB-A port for downloading firmware upgrades from a thumb drive, PC or Mac. The SkyPanel S30-RP can be used worldwide, thanks to its included 90-250 VAC power supply but it can also use optional 23-36 VDC batteries when mains power is unavailable. Besides the power supply, the light comes with a combo baby/junior (5/8" | 1-1/8") pin and a standard diffuser. This version of the light comes with a 3.3'-long bare ends DC power cable.
|
If you own a Arri led lights and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the Arri SkyPanel S30-RP Daylight LED Remote Phosphor L0.0007727 in the following formats:
- *.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
|
Additional parameters of the Arri SkyPanel S30-RP Daylight LED Remote Phosphor L0.0007727:
Optical System | Remote phosphor panel | Panel Active Area (WxH) | 14 x 11.8" / 35.5 x 30.0 cm | Beam Angle | 110° (half peak angle) | Color Adjustment | Via interchangeable remote phosphor panels; 5,600K panel included | Color Temperature Tolerance | +/- 200K (nominal) | Color Rendering Index | >94 (with included 5,600K panel) | Dimming | 0-100% continuous | Control | On-board controller, 5-pin DMX in and through, EtherCon LAN connectivity, USB-A
Remote device management: DMX setup, hour counter, and standard RDM commands USB interface: DMX setup, fixture status and firmware upgrades via PC, Mac, or USB drive | Mounting | Combo pin baby 5/8" (16 mm) and junior 1 1/8" (28 mm) Aluminum yoke; +/- 90° tilt Pole operation for pan and tilt | LED Lifetime | Approx. 50,000 hours (L70) Approx. <200K color shift over lifetime | Power | Lamphead voltage input: 48 VDC Power consumption: 200 W (nominal) / 240 W (maximum) Lamphead power connection: Male 3-pin XLR (15 A; Pin 1: Negative / Pin 2: Positive) Battery connector: Male 4-pin XLR (10 A; Pin 1: Negative / Pin 4: Positive) Battery DC voltage range: 23-36 VDC Battery mode light output: 100% | Certifications | Protection class: IP 20 CE, FCC; GS, cNRTL, CB | Operating Environment | -4 to +113°F / -20 to +45°C | Dimensions | Panel: 15.6 x 13.5 x 5.2" / 39.7 x 34.2 x 13.3 cm Panel with yoke: 20.0 x 22 x 5.2" / 50.7 x 55.9 x 13.3 cm | Weight | 19.4 lb / 8.8 kg | Input Range | 90-250 VAC, 50-60 Hz | Output Range | 48 VDC | Input Connections | powerCON TRUE1 to bare ends | Output Connection | Female 3-pin XLR (10 A; Pin 1: Negative / Pin 2: Positive) powerCON TRUE1 (mains power through) | Control | On/Off switch | Mounting | Super clamp attachment, SkyPanel PSU rail mount | Dimensions | 15.0 x 4.6 x 3.5" / 38.3 x 11.6 x 9.0 cm | Weight | 5.5 lb / 2.5 kg | |
The user manual for the Arri SkyPanel S30-RP Daylight LED Remote Phosphor L0.0007727 can be downloaded in .pdf
format if it did not come with your new led lights, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other Arri users keep a unique electronic library
for Arri led lightss,
where you can use our link to download the user manual for the Arri SkyPanel S30-RP Daylight LED Remote Phosphor L0.0007727.
The user manual lists all of the functions of the Arri SkyPanel S30-RP Daylight LED Remote Phosphor L0.0007727,
all the basic and advanced features and tells you how to use the led lights.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from Arri service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the Arri SkyPanel S30-RP Daylight LED Remote Phosphor L0.0007727. User manuals are also
available on the Arri website under Lighting & Studio - Continuous Lighting - LED Lights.
Question and answer discussion forum concerning user instructions and resolving problems with the Arri SkyPanel S30-RP Daylight LED Remote Phosphor L0.0007727 - no comments have been made yet - be the first to add a comment
Post new comment/question/response regarding the Arri SkyPanel S30-RP Daylight LED Remote Phosphor L0.0007727
|
|
|
|
|