User manual Ashly NXE1.52 Network Power Amplifier NXE1.52
Operating instructions and pdf manual for use - Ashly NXE1.52 Network Power Amplifier NXE1.52 User manual, User manual Ashly NXE1.52 Network Power Amplifier NXE1.52, Ashly, NXE1.52, Network, Power, Amplifier, NXE1.52, Video
User manual for Ashly NXE1.52 Network Power Amplifier NXE1.52
Manufacturer: Ashly
Basic description and contents of package
Product classification: Pro Audio - Installation Sound - 70-Volt Amplifiers
Safety instructions
Startup and operation of the 70-volt amplifiers
Tips for setting up your Ashly
Settings and expert assistance
Contact Ashly service
Troubleshooting
Warranty information
We recommend checking out our discussion threads on the Ashly NXE1.52 Network Power Amplifier NXE1.52,
which address similar problems with connecting and setting up 70-Volt Amplifiers Ashly.
User manual for the Ashly NXE1.52 Network Power Amplifier NXE1.52
The user manual for the Ashly NXE1.52 Network Power Amplifier NXE1.52 provides
necessary instructions for the proper use of the product Pro Audio - Installation Sound - 70-Volt Amplifiers.
The NXE1.52 Network Power Amplifier from Ashly Audio is the networkable version of the nX amplifier. It comes with Ethernet control, serial data control, aux preamp outputs, instant standby mode, preset recall, fault condition logic outputs, and optional network audio and digital audio capability. All these are controlled using Ashly Audio's Protea software suite. This amplifier is designed to meet the most demanding live sound and fixed installation sound systems in stadiums, arenas, performance venues, worship spaces, and convention centers.
If you own a Ashly 70-volt amplifiers and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the Ashly NXE1.52 Network Power Amplifier NXE1.52 in the following formats:
*.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
Additional parameters of the Ashly NXE1.52 Network Power Amplifier NXE1.52:
Threshold: -20 to +20 dBu Ratio: Infinite Attack: 0.2 to 50 ms/dB Release: 5 to 1000 ms/dB
Compressor
Threshold: -20 to +20 dBu Ratio: 1.2:1 to infinite Attack: 0.2 to 50 ms Release: 5 to 1000 ms/dB Detector: Peak / average Attenuation Bus: 2 available Metering: In, out, attenuation, graphical
Control
Autoleveler Controls
Target Level: -40 to +20 dBu Action: Gentle, normal, aggressive, user defined Maximum Gain: 0 to +22 dB Metering: Input, Gain, Attenuation Ratio: 1.2:1 to 10:1 Threshold Below Target: -30 to 0 dB Gain Increase/Decrease Rate: 5 to 1000 ms/dB Hold Time: 0 to 6 s
Noise
Ambient Noise Compensation: Output Only
Max Gain: -20 to +20 dB Min/Base Gain: -40 to +20 dB Gain Change Rate: 0.2 to 20 s/dB Link Group: 16 available ANC Input Channel: 1 to 2 or 1 to 4 Noise Threshold: -40 to +20 dBu Program/Ambient Gain Ratio: 0.3:1 to 3:1 Metering: Input level, Attenuation, Average noise
Ducking
Ducking: High/Low Priority, Trigger, Filibuster, Ducked Program
Trigger Threshold: -80 to +20 dBu Ducking Release: 5 to 1000 ms / dB Ducking Depth: 0 to -30 dB, -∞ Metering: Input
Gate
Threshold: -80 to +20 dBu Range: off, 100 to 0 dB Attack: 0.2 to 50 ms/dB Release: 5 to 1000 ms/dB Metering: Key signal, Gate LED, graphical
Advanced Gate Controls
Key Frequency: 20 Hz to 20 kHz Key Bandwidth: 0.016 to 3.995 octave
Gain
Gain (with/without VCA): -50 to +12 dB, off, polarity invert Digital VCA Groups: 4 available Remote RD8C Gain: Enable per channel, 0 dB to -∞ WR-5 (neWR-5) Remote Gain: 0 to -50 dB, mute
Band
31-Band
Filter Type: Constant Q or proportional Bandwidth: 0.499 to 0.25 oct
Parametric 2,4,6, or 10 Band Frequency: 20 Hz to 20 kHz Level: -30 to +15 dB Q Value: 0.016 to 3.995 octave
Hi/Low Shelf 6/12 dB/oct Frequency: 20 Hz to 20 kHz Level: -15 to +15 dB
All Pass Frequency: 20 Hz to 20 kHz Variable Q HP/LP Frequency: 20 Hz to 20 kHz Q Value: 3.047 to 0.267 Notch/Bandpass Frequency: 20 Hz to 20 kHz Q Value: 92.436 to 0.267 Filters: 12 Filter Modes: Float, restricted, manual Filter Type: Notch, parametric Filter Frequency Range: 20 Hz to 20 kHz Notch Filter: -∞ Parametric Filter: +15 to -30 dB Filter Bandwidth: 0.016 to 3.995 octave Detector Sensitivity: 5 levels Float Time: 5 minutes to 24 hours Bessel & Butterworth Filters: 12/18/24/48 dB/oct Linkwitz-Riley Filter: 12/24/48 dB/oct Frequency: Off, 20 Hz to 20 kHz Speaker Delay: 0 to 21 ms Delay: 0 to 682 ms Speaker Delay: 0 to 10.6 ms Delay: 0 to 341 ms
Audio Metering
Range: -60 to +20 dBu Increments: 1 dB Signal Level: Off, -50 to +20 dBu Sine Wave Frequency: 20 Hz to 12 kHz
Matrix Type
Matrix Mixer
Gain (0.5dB increments): Off, -50 to +12 dB Mute: Per channel Auto-mixer Enabled: Per channel Global Auto-mixer Response: 0.01 to 2 sec Ducking LED: Per channel if enabled Metering: Level, auto-mixer level
Processor
Input A/D, Output D/A: 24-bit DSP Processors: 32-bit floating point Sample Rates: 48, 96 kHz Propagation Delay @ 48kHz: 1.42 ms Propagation Delay @ 96kHz: 0.71 ms
The user manual for the Ashly NXE1.52 Network Power Amplifier NXE1.52 can be downloaded in .pdf
format if it did not come with your new 70-volt amplifiers, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other Ashly users keep a unique electronic library
for Ashly 70-volt amplifierss,
where you can use our link to download the user manual for the Ashly NXE1.52 Network Power Amplifier NXE1.52.
The user manual lists all of the functions of the Ashly NXE1.52 Network Power Amplifier NXE1.52,
all the basic and advanced features and tells you how to use the 70-volt amplifiers.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from Ashly service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the Ashly NXE1.52 Network Power Amplifier NXE1.52. User manuals are also
available on the Ashly website under Pro Audio - Installation Sound - 70-Volt Amplifiers.
Question and answer discussion forum concerning user instructions and resolving problems with the Ashly NXE1.52 Network Power Amplifier NXE1.52 - no comments have been made yet - be the first to add a comment