|
User manual for Axis Communications M7016 16-Channel Video Encoder 0541-004
Overall Rating: 5.0
100% of respondents would recommend this to a friend.
- Manufacturer: Axis Communications
- Basic description and contents of package
- Product classification: Surveillance - Surveillance Video - Video Transmission - Video Encoders & Decoders
- Safety instructions
- Startup and operation of the video encoders & decoders
- Tips for setting up your Axis Communications
- Settings and expert assistance
- Contact Axis Communications service
- Troubleshooting
- Warranty information
- Price: 949 USD
|
We recommend checking out our discussion threads on the Axis Communications M7016 16-Channel Video Encoder 0541-004,
which address similar problems with connecting and setting up Video Encoders & Decoders Axis Communications.
|
User manual for the Axis Communications M7016 16-Channel Video Encoder 0541-004
The user manual for the Axis Communications M7016 16-Channel Video Encoder 0541-004 provides
necessary instructions for the proper use of the product Surveillance - Surveillance Video - Video Transmission - Video Encoders & Decoders.
Revamp your analog camera setup with the M7016 16-Channel Video Encoder from Axis Communications, which takes inputs from up to 16 channels and encodes them into digital video using H.264 or MJPEG compression. The M7016 can also stream simultaneously in both formats and offers both single and quad view options at high resolutions. It supports D1 resolutions at up to 30 fps and has four RS-485/422 ports for full control over PTZ cameras. Also, it conveniently functions as either a standalone device or mounted in a 19" rack.
Adding the M7016 encoder to your setup also benefits through the implementation of numerous intelligent functions, including video motion detection and a tampering alarm. Additionally, it has a four microSD card slots each supporting up to 64GB for storage and comes with an AC power supply.
|
If you own a Axis Communications video encoders & decoders and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the Axis Communications M7016 16-Channel Video Encoder 0541-004 in the following formats:
- *.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
|
Additional parameters of the Axis Communications M7016 16-Channel Video Encoder 0541-004:
Video Compression | H.264 (MPEG-4 Part 10/AVC) Baseline and Main Profile MJPEG | Resolutions | Single View: 176 x 120 to 720 x 576 Quad View: 176 x 120 to 1536 x 1152 | Frame Rate | NTSC: 30 fps PAL: 25 fps 15 fps in quad view in full resolution | Video Streaming | One individually configured H.264 and one Motion JPEG stream per channel at full frame rate More streams if identical or limited in frame rate/resolution Controllable frame rate and bandwidth, VBR/CBR H.264 | Image Settings | Compression, color, brightness, contrast, aspect ratio correction, mirroring of images, text and image overlay, privacy mask, enhanced deinterlace filter, video termination, anti-aliasing, temporal noise filtering Rotation: 90°, 180°, 270° | Pan/Tilt/Zoom | Wide range of analog PTZ cameras supported Support for one PTZ driver in each group of 4 channels 100 presets/camera, guard tour, PTZ control queue Supports Windows compatible joysticks | Security | Password protection, IP address filtering, HTTPS encryption, IEEE 802.1X network access control, digest authentication, user access log | Supported Protocols | IPv4/v6, HTTP, HTTPS, IEEE 802.1X, QoS Layer 3 DiffServ, FTP, SMTP, Bonjour, UPnP, SNMPv1/v2c/v3 (MIB-II), DNS, DynDNS, NTP, RTSP, RTP, TCP, UDP, IGMP, RTCP, ICMP, DHCP, ARP, SOCKS | Application Programming Interface | Open API for software integration, including VAPIX AXIS Video Hosting System (AVHS) with One-Click Camera Connection ONVIF Profile S | Intelligent Video | Video motion detection, active tampering alarm | Event Trigger | Intelligent video, video loss | Event Action | File Upload: FTP, HTTP, network share, and email Notification: email, HTTP, and TCP Video recording to edge storage Pre- and post-alarm video buffering PTZ preset | Data Streaming | Event data | Memory | 4 x 128 MB flash | RAM | 4 x 512 MB | Connectors | 16 x Analog composite video inputs (BNC) 1 x RJ-45 1000Base-TX Ethernet 4 x Terminal blocks for RS-422/RS-485 serial communication (full duplex) 1 x DC input terminal block | Edge Storage | 4 x microSD/SDHC/SDXC slots supporting memory cards up to 64 GB Support for recording to network share (network-attached storage or file server) | Approvals | EN 55022 Class B, EN 61000-3-2, EN 61000-3-3, EN 55024, EN 61000-6-1, EN 61000-6-2, FCC Part 15 Subpart B Class B, ICES-003 Class B, VCCI Class B, C-tick AS/NZS CISPR 22 Class B, KCC KN22 Class B, KN24, IEC/EN/UL 60950-1 | Operating Conditions | Temperature: 32 to 122°F / 0 to 50°C Humidity: 20 to 80%, non-condensing | Power | AXIS PS-P Power Supply: 12 VDC | Power Consumption | 17 W | Dimensions | 19.0 x 1.7 x 4.5" / 48.2 x 4.4 x 11.4 cm | Weight | 4.1 lb / 1.9 kg | Package Weight | 6.25 lb | Box Dimensions (LxWxH) | 22.5 x 7.5 x 2.75" | |
The user manual for the Axis Communications M7016 16-Channel Video Encoder 0541-004 can be downloaded in .pdf
format if it did not come with your new video encoders & decoders, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other Axis Communications users keep a unique electronic library
for Axis Communications video encoders & decoderss,
where you can use our link to download the user manual for the Axis Communications M7016 16-Channel Video Encoder 0541-004.
The user manual lists all of the functions of the Axis Communications M7016 16-Channel Video Encoder 0541-004,
all the basic and advanced features and tells you how to use the video encoders & decoders.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from Axis Communications service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the Axis Communications M7016 16-Channel Video Encoder 0541-004. User manuals are also
available on the Axis Communications website under Surveillance - Surveillance Video - Video Transmission - Video Encoders & Decoders.
Question and answer discussion forum concerning user instructions and resolving problems with the Axis Communications M7016 16-Channel Video Encoder 0541-004 - no comments have been made yet - be the first to add a comment
Post new comment/question/response regarding the Axis Communications M7016 16-Channel Video Encoder 0541-004
|
|
|
|
|