|
User manual for Barco ImagePRO-II All-in-One Video Scaler, Scan R9004677
- Manufacturer: Barco
- Basic description and contents of package
- Product classification: Professional Video - Signal Processing & Distribution - Signal Converters
- Safety instructions
- Startup and operation of the signal converters
- Tips for setting up your Barco
- Settings and expert assistance
- Contact Barco service
- Troubleshooting
- Warranty information
|
We recommend checking out our discussion threads on the Barco ImagePRO-II All-in-One Video Scaler, Scan R9004677,
which address similar problems with connecting and setting up Signal Converters Barco.
|
User manual for the Barco ImagePRO-II All-in-One Video Scaler, Scan R9004677
The user manual for the Barco ImagePRO-II All-in-One Video Scaler, Scan R9004677 provides
necessary instructions for the proper use of the product Professional Video - Signal Processing & Distribution - Signal Converters.
The ImagePRO-II All-in-One Video Scaler, Scan Converter and Switcher from Barco can convert any input signal format to any output format. The ImagePRO-II supports universal analog, DVI single and dual link, HDMI, DisplayPort, and SD/HD/3G SDI signal formats. Loop-through outputs are provided for the analog, DVI and SDI input and genlock signals. With features like HDCP and EDID management, USB backup and restore, multiple video effects and web page interface, the ImagePRO-II is an advanced and flexible signal processor in the industry.
|
If you own a Barco signal converters and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the Barco ImagePRO-II All-in-One Video Scaler, Scan R9004677 in the following formats:
- *.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
|
Additional parameters of the Barco ImagePRO-II All-in-One Video Scaler, Scan R9004677:
| Video Inputs | DVI-I
Digital formats; all single-link DVI digital formats up to 165 MHz, per DVI 1.0 Specification and all dual-link DVI formats up to 300 MHz; Maximum H Active: 4096 Maximum V Active: 3072
Analog formats: NTSC/PAL composite and Y/C video, SD YPbPR with bi-level sync, HD YPbPr with tri-level sync, RGBHV/RGBS/RGsB computer video with bi-level sync Analog sampling: sources with pixel rates up to 170 MHz are sampled 1:1; sources with pixel rates above 170 MHz are filtered and sampled at 170 MHz, including but not limited to 1920 x 1200p, 2048 x 1080p
Active loop-through output of all input signals, including HDCP and EDID EDID version 1.3 compatible HDCP version 1.4 compatible
VGA HD-15
Format: NTSC/PAL composite and Y/C video SD YPbPr with bi-level sync HD YPbPr with tri-level sync per SMPTE 274, RGBHV/RGBS/RGsB computer video with bi-level sync
Sampling: sources with pixel rates up to 170 MHz are sampled 1:1; sources with pixel rates above 170 MHz are filtered and sampled at 170 MHz, including but not limited to: 1920 x 1200p, 2048 x 1080p
Active loop-through output of all input signals
EDID version 1.3 compatible
HDMI Type A
Formats: RGB and YCbCr; Resolutions up to 2048 x 1080p @ 60 Hz per HDMI 1.4 specification and 1920 x 1200p @ 60 Hz
EDID version 1.3 compatible
HDCP version 1.4 compatible
Deep color (30/36 bits)
DisplayPort
Formats: resolutions up to 2560 x 1600 @ 60 Hz (30 bits) per DisplayPort 1.1a specification
HDCP version 1.4 compatible
SD/HD/3G SDI
Formats: SD-SDI per SMPTE 259M-C (NTSC/PAL resolution); HD-SDI per SMPTE 292M, 296M; 3G-SDI per SMPTE 424
Re-clocked loop-through output | | Video Outputs | SD/HD/3G and BarcoLink SDI
Formats: SD-SDI per SMPTE 259M-C (NTSC/PAL resolution); HD-SDI per SMPTE 292M, 296M; 3G-SDI per SMPTE 424
Composite Video
NTSC/PAL
CVBS on BNC connector
DVI-D
Formats all single-link DVI digital formats up to 165 MHz, per DVI 1.0 specification All dual-link DVI formats up to 330 MHz
EDID version 1.3 compatible
HDCP version 1.4 compatible
VGA HD-15
Formats: NTSC/PAL composite on green, NTSC/PAL Y/C video with bi-level sync on Y only, (Y: Green, C: Red); SD YPbPr with bi-level sync; HD YPbPR with tri-level sync per SMPTE 274; RGBHV/RGBS/RGsB computer video with bi-level sync
EDID version 1.3 compatible
HDMI Type A
Formats: RGB and YCbCr at 4:4:4, YCbCr at 4:2:2, per HDMI 1.4 specification; Resolutions up to 2048 x 1080p @ 60 Hz and 1920 x 1200 @ 60 Hz
EDID version 1.3 compatible
HDCP version 1.4 compatible
DisplayPort
Formats: resolutions up to 2560 x 1600 @ 60 Hz (30 bits) per DisplayPort 1.1a
HDCP version 1.4 compatible | | Genlock | Analog Ref Input/Loop/Output on BNC connectors; Bi-level and Blackburst at SD and Tri-level at HD or locked to any input | | Remote Control | USB 1.1
Ethernet RJ-45, 10/100 Mb/s Autosense
Computer, tablet, smartphone, or external Encore or ScreenPRO-II Controller via Ethernet link
Control functions include: source input configuration, output format selection, test pattern selection, transition effect selection and control | | Input Power | 100 to 240 VAC, 47 to 63 Hz, auto-selecting 2.0 A maximum | | Temperature | 32 to 104°F (0 to 40°C) | | Humidity | 0 to 95% non-condensing | | Height | 1.75" (4.44 cm) 1 RU Rackmount | | Width | 17.00" (43.18 cm) without chassis handles
19.06" (48.41 cm) with chassis handles attached | | Depth | 17.09" (43.40 cm) from front panel to rear panel, 18.51" (47.01 cm) overall | | Weight | 15.75 lb (7.14 kg) | | Package Weight | 24.9 lb | | Box Dimensions (LxWxH) | 25.5 x 25.4 x 7.5" | |
The user manual for the Barco ImagePRO-II All-in-One Video Scaler, Scan R9004677 can be downloaded in .pdf
format if it did not come with your new signal converters, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other Barco users keep a unique electronic library
for Barco signal converterss,
where you can use our link to download the user manual for the Barco ImagePRO-II All-in-One Video Scaler, Scan R9004677.
The user manual lists all of the functions of the Barco ImagePRO-II All-in-One Video Scaler, Scan R9004677,
all the basic and advanced features and tells you how to use the signal converters.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from Barco service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the Barco ImagePRO-II All-in-One Video Scaler, Scan R9004677. User manuals are also
available on the Barco website under Professional Video - Signal Processing & Distribution - Signal Converters.
Question and answer discussion forum concerning user instructions and resolving problems with the Barco ImagePRO-II All-in-One Video Scaler, Scan R9004677 - no comments have been made yet - be the first to add a comment
Post new comment/question/response regarding the Barco ImagePRO-II All-in-One Video Scaler, Scan R9004677
|
|
|
|
|
