|
User manual for Benro MoveOver12 35.4" Dual Carbon Rail Slider Kit C12D9K1
- Manufacturer: Benro
- Basic description and contents of package
- Product classification: Professional Video - Tripods, Supports & Rigs - Camera Sliders
- Safety instructions
- Startup and operation of the camera sliders
- Tips for setting up your Benro
- Settings and expert assistance
- Contact Benro service
- Troubleshooting
- Warranty information
|
We recommend checking out our discussion threads on the Benro MoveOver12 35.4" Dual Carbon Rail Slider Kit C12D9K1,
which address similar problems with connecting and setting up Camera Sliders Benro.
|
User manual for the Benro MoveOver12 35.4" Dual Carbon Rail Slider Kit C12D9K1
The user manual for the Benro MoveOver12 35.4" Dual Carbon Rail Slider Kit C12D9K1 provides
necessary instructions for the proper use of the product Professional Video - Tripods, Supports & Rigs - Camera Sliders.
The MoveOver12 Dual Carbon Rail Slider Kit from Benro features all the components you need to capture cinematic linear movement to your productions. The kit features the MoveOver12 35.4" Dual Carbon Rail Slider and pairs it with an S8 Pro Video Head and a pair of Travel Flat AL Series 2 tripods with LBA2 Leveling Bases. The entire system packs inside an included rolling case for easy storage and transport.
The slider carriage features four bearings that allow it to glide across a pair of 22mm carbon fiber rails for smooth and quiet operation. Additionally, the slider is equipped with a weighted flywheel and rubber track belt drive that enables precise, hand-cranked motion control and smooth ramps in and out of your slides. A fixed 3/8"-16 screw on the carriage lets you attach the included S8 Pro Video Head, which can supports loads up to 17.6 pounds and features stepless pan/tilt drag and a 4-step (0 to 3) counterbalance system. The slider itself can support up to 26.5 pounds, allowing it to handle the weight of the head and attached camera.
A cheese plate on the underside of the rail provides multiple 1/4"-20 and 3/8"-16 threaded holes for easy center-mounting. For heavier loads, each end block features 3/8"-16 female adapters for mounting on the two included Travel Flat aluminum tripods. The tripods offer a maximum height of 44.75" without the LBA2 leveling bases and 46.75" with them. By removing the 3/8"-16 adapters, you can also mount the slider on a pair of C-stands or light stands that have 5/8" studs. For easy leveling, each tripod comes with a leveling base that can tilt +/-15° in any direction. The slider can also be used on the ground or on a table-top thanks to its all-terrain legs and articulating rubber feet.
Please see the links below for more information on the components of this kit.
|
If you own a Benro camera sliders and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the Benro MoveOver12 35.4" Dual Carbon Rail Slider Kit C12D9K1 in the following formats:
- *.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
|
Additional parameters of the Benro MoveOver12 35.4" Dual Carbon Rail Slider Kit C12D9K1:
Benro MoveOver12 35.4" Dual Carbon Rail Slider Kit with Video Head & Tripods This Bundle Includes: |
The user manual for the Benro MoveOver12 35.4" Dual Carbon Rail Slider Kit C12D9K1 can be downloaded in .pdf
format if it did not come with your new camera sliders, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other Benro users keep a unique electronic library
for Benro camera sliderss,
where you can use our link to download the user manual for the Benro MoveOver12 35.4" Dual Carbon Rail Slider Kit C12D9K1.
The user manual lists all of the functions of the Benro MoveOver12 35.4" Dual Carbon Rail Slider Kit C12D9K1,
all the basic and advanced features and tells you how to use the camera sliders.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from Benro service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the Benro MoveOver12 35.4" Dual Carbon Rail Slider Kit C12D9K1. User manuals are also
available on the Benro website under Professional Video - Tripods, Supports & Rigs - Camera Sliders.
Question and answer discussion forum concerning user instructions and resolving problems with the Benro MoveOver12 35.4" Dual Carbon Rail Slider Kit C12D9K1 - no comments have been made yet - be the first to add a comment
Post new comment/question/response regarding the Benro MoveOver12 35.4" Dual Carbon Rail Slider Kit C12D9K1
|
|
|
|
|
