|
User manual for Black Box Multi-Format AV Scaler/Switcher AVSC-7DA-HDMI
- Manufacturer: Black Box
- Basic description and contents of package
- Product classification: Professional Video - Signal Processing & Distribution - Routers & Switchers
- Safety instructions
- Startup and operation of the routers & switchers
- Tips for setting up your Black Box
- Settings and expert assistance
- Contact Black Box service
- Troubleshooting
- Warranty information
- Price: 837 USD
|
We recommend checking out our discussion threads on the Black Box Multi-Format AV Scaler/Switcher AVSC-7DA-HDMI,
which address similar problems with connecting and setting up Routers & Switchers Black Box.
|
User manual for the Black Box Multi-Format AV Scaler/Switcher AVSC-7DA-HDMI
The user manual for the Black Box Multi-Format AV Scaler/Switcher AVSC-7DA-HDMI provides
necessary instructions for the proper use of the product Professional Video - Signal Processing & Distribution - Routers & Switchers.
Ideal for presentations and multi-format AV setups, the Multi-Format AV Scaler/Switcher with DisplayPort from Black Box scales and scan-converts video from composite, S-video, component, VGA, DVI, HDMI, and DisplayPort sources outputting it to HDMI and VGA. It will support input resolutions up to 2560 x 1600 for DisplayPort sources, and up to 1080p (at 50 or 60 Hz) and 1920 x 1200 (WUXGA) for DisplayPort, HDMI, DVI, component, and VGA sources. After scaling and re-timing, if required, it can output at up to 1600 x 1200 (UXGA) and 1080p resolutions. Additionally, NTSC and PAL/SECAM SD video signals are supported across the inputs and outputs.
The video inputs apart from DisplayPort are each paired with a stereo analog input, and the component input features a S/PDIF (RCA) audio input as well as the analog one. There is one stereo analog and one S/PDIF digital audio output. In addition to the separate inputs and output, HDMI-embedded audio will also pass through the device.
The device can be controlled locally via front-panel controls or using the included IR remote control. For remote operation, there is an RS-232 port for automation systems a software-based control, and there is an Ethernet port for controlling it over a network.
|
If you own a Black Box routers & switchers and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the Black Box Multi-Format AV Scaler/Switcher AVSC-7DA-HDMI in the following formats:
- *.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
|
Additional parameters of the Black Box Multi-Format AV Scaler/Switcher AVSC-7DA-HDMI:
| Video Inputs | 1 x DisplayPort
1 x HDMI
1 x DVI-D
1 x Composite on RCA connector
1 x VGA
1 x Component on 3 x RCA connectors
1 x S-video in 4-pin mini-DIN | | Input Resolutions | All Inputs: NTSC (480i), PAL (576i)
DisplayPort, HDMI, DVI, Component, VGA:1080p (up to 60 Hz), WUXGA (1920 x 1200)
DisplayPort Only: 2560 x 1600 | | Audio Inputs | Component Video Channel:
1 x Stereo analog on 2 x RCA connectors
1 x S/PDIF on RCA connector
S-video Channel:
1 x Stereo analog on 2 x RCA connectors
Composite Video Channel:
1 x Stereo analog on 2 x RCA connectors
DVI Channel:
1 x Stereo analog audio on 3.5 mm mini jack
VGA Channel:
1 x Stereo analog audio on 3.5 mm mini jack | | Video Outputs | 1 x HDMI
1 x VGA | | Output Resolutions | 50 Hz Only: 576p, 720p
60 Hz Only: 480i, 480p, 920 x 1200
50 or 60 Hz: SVGA (800 x 600), XGA (1024 x 768), 720p, 1080p, WXGA (1280 x 800), UXGA (1600 x 1200), 1400 x 1500
24 Hz: 1080p
100 Hz: 720p
120 Hz: 720p, XGA (1024 x 768) | | Audio Outputs | 1 x S/PDIF on RCA connector
1 x Stereo analog audio on 3.5 mm mini jack
HDMI-embedded audio | | Control | 1 x Ethernet on RJ-45 connector
1 x RS-232 on DB-9 female connector
1 x IR extender port on 3.5 mm mini jack | | Service | 1 x Link port on 4-pin terminal block connector (for firmware updates) | | DC Jack | Outer Diameter: 5.5 mm
Inner Diameter: 2.1 mm | | Power Requirements | Device: 12 VDC, 10 A
Power Supply: 100 to 240 VAC, 50 to 60 Hz | | Dimensions (H x W x D) | 1.7 x 12 x 6" / 4.3 x 30.5 x 15.2 cm | | Weight | 3.4 lb / 2 kg | | Package Weight | 5.85 lb | | Box Dimensions (LxWxH) | 13.0 x 10.2 x 3.0" | |
The user manual for the Black Box Multi-Format AV Scaler/Switcher AVSC-7DA-HDMI can be downloaded in .pdf
format if it did not come with your new routers & switchers, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other Black Box users keep a unique electronic library
for Black Box routers & switcherss,
where you can use our link to download the user manual for the Black Box Multi-Format AV Scaler/Switcher AVSC-7DA-HDMI.
The user manual lists all of the functions of the Black Box Multi-Format AV Scaler/Switcher AVSC-7DA-HDMI,
all the basic and advanced features and tells you how to use the routers & switchers.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from Black Box service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the Black Box Multi-Format AV Scaler/Switcher AVSC-7DA-HDMI. User manuals are also
available on the Black Box website under Professional Video - Signal Processing & Distribution - Routers & Switchers.
Question and answer discussion forum concerning user instructions and resolving problems with the Black Box Multi-Format AV Scaler/Switcher AVSC-7DA-HDMI - no comments have been made yet - be the first to add a comment
Post new comment/question/response regarding the Black Box Multi-Format AV Scaler/Switcher AVSC-7DA-HDMI
|
|
|
|
|
