|
User manual for Blonder Tongue CATV Channelized Audio/Video BAVM-860SAW-860-25
- Manufacturer: Blonder Tongue
- Basic description and contents of package
- Product classification: Professional Video - Signal Processing & Distribution - RF Equipment
- Safety instructions
- Startup and operation of the rf equipment
- Tips for setting up your Blonder Tongue
- Settings and expert assistance
- Contact Blonder Tongue service
- Troubleshooting
- Warranty information
- Price: 110 USD
Click to enlarge image
|
We recommend checking out our discussion threads on the Blonder Tongue CATV Channelized Audio/Video BAVM-860SAW-860-25,
which address similar problems with connecting and setting up RF Equipment Blonder Tongue.
|
User manual for the Blonder Tongue CATV Channelized Audio/Video BAVM-860SAW-860-25
The user manual for the Blonder Tongue CATV Channelized Audio/Video BAVM-860SAW-860-25 provides
necessary instructions for the proper use of the product Professional Video - Signal Processing & Distribution - RF Equipment.
The CATV Channelized Audio/Video Modulator, Channel 25, from Blonder Tongue is an all-solid-state audio/video modulator that provides a modulated visual and aural RF carrier output on one specific CATV channel. The unit modulates the audio and video inputs and provides the requested RF CATV channel output for use in a CATV, MATV or SMATV system. The modulator accepts standard (sync negative) polarity video at a 0.7-2.5V peak to peak level from sources such as a TV camera, video tape recorder, TV demodulator or satellite receiver.
The modulator features a +55dBmV RF output level, and an IF SAW filtering for adjacent channel operation. All aeronautical channels are offset positive with a tolerance of ±5kHz as required by FCC 21006. All level controls are located on the front panel. The RF level control provides up to +55dBmV output. The video modulator control sets the depth of modulation for 87.5% over an input video level range from 0.7VP/p to 2.5VP/p. An audio modulation control permits adjustment for ±25kHz peak deviation of the aural carrier.
|
If you own a Blonder Tongue rf equipment and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the Blonder Tongue CATV Channelized Audio/Video BAVM-860SAW-860-25 in the following formats:
- *.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
|
Additional parameters of the Blonder Tongue CATV Channelized Audio/Video BAVM-860SAW-860-25:
| Frequency Range | CATV channel 25 | | Output Level | 55 dBmV, minimum | | Output Level Range | 15 dB | | Audio/Video Carrier Ratio Control | -7 dB to -20 dB | | Frequency Tolerance | ±10 kHz standard channels, ±5 kHz FCC 21006 offsets | | Audio Carrier Frequency Setting | ±1 kHz maximum, 4.5 MHz above video carrier | | RF to Video Response | 1 dB P/V from Fv -0.5 MHz to Fv +4.2 MHz | | Broadband Noise | -90 dBc | | Spurious Output | -60 dBc in 50 to 860 MHz Range @ +55 dBmV output | | Output Match (Return Loss) | 12 dBc | | Vestigial Sideband Response | @ channel edge -20 dB, @ adjacent channel -40 dB | | Input | 0.7 to 2.5 V peak to peak for 87.5% modulation | | Input Return Loss | 18 dB | | Carrier-to-Noise Ratio | 62 dB in 4 MHz bandwidth | | Hum Ratio | 60 dB peak to peak video to 60 Hz RMS | | Differential Gain | 5% at 87.5% modulation | | Differential Phase | 5° at 87.5% modulation | | Group Delay | 170 ±50 nS | | Input Impedance | 10 kΩ, unbalanced | | Input | 140 mV RMS for 25 kHz peak deviation | | Frequency Response | ±1.0 dB (50 Hz - 15 kHz referent to standard 75 msec pre-emphasis) | | Intercarrier Stability | 4.5 MHz at ±5.0 kHz | | Power Requirements | 105 - 130 VAC, 60 Hz, 10.5 W | | Temperature Range | 0 to +50°C | | Audio In | F-type female | | Video In | F-type female | | RF Output | F-type female | | RF Output Test | F-type female -30 dB | | AC Outlet | Female AC outlet 600 VA maximum | | Line Cord | 6' power cable: 3 wire grounded, 3 wire convenience outlet | | Dimensions (W x H x D) | 19 x 1.75 x 3" (48.26 x 4.44 x 7.62 cm) | | Weight | 4 lb (1.8 kg) | | Package Weight | 4.7 lb | | Box Dimensions (LxWxH) | 21.4 x 5.8 x 3.3" | |
The user manual for the Blonder Tongue CATV Channelized Audio/Video BAVM-860SAW-860-25 can be downloaded in .pdf
format if it did not come with your new rf equipment, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other Blonder Tongue users keep a unique electronic library
for Blonder Tongue rf equipments,
where you can use our link to download the user manual for the Blonder Tongue CATV Channelized Audio/Video BAVM-860SAW-860-25.
The user manual lists all of the functions of the Blonder Tongue CATV Channelized Audio/Video BAVM-860SAW-860-25,
all the basic and advanced features and tells you how to use the rf equipment.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from Blonder Tongue service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the Blonder Tongue CATV Channelized Audio/Video BAVM-860SAW-860-25. User manuals are also
available on the Blonder Tongue website under Professional Video - Signal Processing & Distribution - RF Equipment.
Question and answer discussion forum concerning user instructions and resolving problems with the Blonder Tongue CATV Channelized Audio/Video BAVM-860SAW-860-25 - no comments have been made yet - be the first to add a comment
Post new comment/question/response regarding the Blonder Tongue CATV Channelized Audio/Video BAVM-860SAW-860-25
|
|
|
|
|
