User manual for Bosch LBB 1968/00 Plena Feedback Suppressor F.01U.080.428
- Manufacturer: Bosch
- Basic description and contents of package
- Product classification: Pro Audio - Live Sound - Feedback Controllers
- Safety instructions
- Startup and operation of the feedback controllers
- Tips for setting up your Bosch
- Settings and expert assistance
- Contact Bosch service
- Troubleshooting
- Warranty information
- Price: 858 USD
|
We recommend checking out our discussion threads on the Bosch LBB 1968/00 Plena Feedback Suppressor F.01U.080.428,
which address similar problems with connecting and setting up Feedback Controllers Bosch.
|
User manual for the Bosch LBB 1968/00 Plena Feedback Suppressor F.01U.080.428
The user manual for the Bosch LBB 1968/00 Plena Feedback Suppressor F.01U.080.428 provides
necessary instructions for the proper use of the product Pro Audio - Live Sound - Feedback Controllers.
The Bosch LBB 1968/00 Plena Feedback Suppressor can greatly reduce the risk of acoustic feedback when using a PA system. It does this by using a powerful DSP with a patented algorithm. The unit actively filters out unwanted room reverberations with an echo-cancellation feature and dereverberation algorithm. The device can add a little inaudible noise or shift the output frequency by five hertz. By doing this, it's able to detect the reverb component of the signal and remove it before feedback occurs - leaving the original signal intact.
|
If you own a Bosch feedback controllers and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the Bosch LBB 1968/00 Plena Feedback Suppressor F.01U.080.428 in the following formats:
- *.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
|
Additional parameters of the Bosch LBB 1968/00 Plena Feedback Suppressor F.01U.080.428:
| Sample Rate | 32 kHz | | Frequency Response | 125 Hz - 15 kHz | | Distortion | <0.1% @ 1.0 kHz | | Gain | Bypass Mode: 0 dB line in, 24 / 36 / 48 dB mic in Active Mode: 0 dB line in, 24 / 36 / 48 dB mic in | | Signal-to-Noise Ratio | >90 dB | | Signal Delay | <11 ms | | Decorrelator | Frequency Shift 5 Hz Up / Masked Noise | | Mic/Line Input | Connectors: 3-pin XLR balanced / 5-pin DIN balanced Max level: 18 / 6 / -6 dBV line in Max level: -18 / -30 / -42 dBV mic in Impedance: 10 kohm / 2 kohm (line / mic) CMRR: >25 dB (50 Hz to 20 kHz) Phantom Power: 16 V (mic only, switchable) Priority Control: loop through of pin 4 & 5 of DIN | | Mic Input | Connectors: 3-pin XLR balanced / 5-pin DIN balanced Max level: -18 / -30 / -42 dBV mic in Impedance 2 kohm Phantom Power: 16 V (switchable) Priority Control: loop through of pin 4 & 5 of DIN | | Line Input | Connector: Cinch (unbalanced) Max Input Level: 18 / 6 / -6 dBV Impedance: 20 kohm | | Line Output | Connector: 3-pin XLR (balanced) Max Level: 18 / 6 / -6 dBV (line in) Max Level: 6 dBV (mic in) Impedance: <100 ohm | | Line Output | Connector: Cinch (unbalanced) Max Level: 18 / 6 / -6 dBV (line in) Max Level: 6 dBV (mic in) Impedance: <100 ohm | | Mic Output | Connector: 5-pin DIN (balanced) Max Level: 22 / -34 / -46 dBV (line in) Max Level: 34 dBV (mic in) Impedance: <100 ohm Priority Control: loop-through of pins 4 and 5 of DIN from inputs | | Certifications | Europe: CE / Declaration of Conformity Safety: acc. to EN 60065 Immunity: acc. to EN 55103-2 Emission: acc. to EN 55103-1 | | Mounting | Stand-Alone 19" (48.3 cm) Rack / 1U High | | Color | Charcoal | | Operating Temperature | 14 to 131°F (−10 to 55°C) | | Storage Temperature | −40 to 158°F (−40 to 70°C) | | Relative Humidity | <95% | | Power Requirements | 115/230 VAC (±10%, 50/60 Hz) | | Inrush Current | 3.0 A @ 115 VAC 1.5 A @ 230 VAC | | Power Consumption | 50 VA (max) | | Dimensions (HxWxD) | 2.2 x 16.9 x 10.6" (5.6 x 43.0 x 27.0 cm) | | Weight | 6.6 lb (3.0 kg) | | Package Weight | 10.7 lb | | Box Dimensions (LxWxH) | 22.5 x 14.0 x 8.5" | |
The user manual for the Bosch LBB 1968/00 Plena Feedback Suppressor F.01U.080.428 can be downloaded in .pdf
format if it did not come with your new feedback controllers, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other Bosch users keep a unique electronic library
for Bosch feedback controllerss,
where you can use our link to download the user manual for the Bosch LBB 1968/00 Plena Feedback Suppressor F.01U.080.428.
The user manual lists all of the functions of the Bosch LBB 1968/00 Plena Feedback Suppressor F.01U.080.428,
all the basic and advanced features and tells you how to use the feedback controllers.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from Bosch service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the Bosch LBB 1968/00 Plena Feedback Suppressor F.01U.080.428. User manuals are also
available on the Bosch website under Pro Audio - Live Sound - Feedback Controllers.
Question and answer discussion forum concerning user instructions and resolving problems with the Bosch LBB 1968/00 Plena Feedback Suppressor F.01U.080.428 - no comments have been made yet - be the first to add a comment
Post new comment/question/response regarding the Bosch LBB 1968/00 Plena Feedback Suppressor F.01U.080.428
|
|
