|
User manual for Bosch VIP X1 XF Single-Channel Video Encoder F.01U.130.918
- Manufacturer: Bosch
- Basic description and contents of package
- Product classification: Surveillance - Surveillance Video - Video Transmission - Video Encoders & Decoders
- Safety instructions
- Startup and operation of the video encoders & decoders
- Tips for setting up your Bosch
- Settings and expert assistance
- Contact Bosch service
- Troubleshooting
- Warranty information
- Price: 505 USD
|
We recommend checking out our discussion threads on the Bosch VIP X1 XF Single-Channel Video Encoder F.01U.130.918,
which address similar problems with connecting and setting up Video Encoders & Decoders Bosch.
|
User manual for the Bosch VIP X1 XF Single-Channel Video Encoder F.01U.130.918
The user manual for the Bosch VIP X1 XF Single-Channel Video Encoder F.01U.130.918 provides
necessary instructions for the proper use of the product Surveillance - Surveillance Video - Video Transmission - Video Encoders & Decoders.
The Bosch VIP X1 XF Single-Channel Video Encoder delivers high-quality H.264 video at a resolution up to 704 x 576 (4CIF) at 25/30 ips. In addition, the encoder offers bidirectional audio communication in parallel to video.
Dual streaming feature allows simultaneous video capture using the MPEG-4 and M-JPEG compression formats. The feature enables recording and viewing video at 2 different quality levels to save bandwidth and storage resources. With facility to record video independently on different media, the video encoder allows video recording on iSCSI drives (controlled VRM Video Recording Manager) and redundantly on the local media drives. Automatic Network Replenishment is possible in case of a network failure.
Featured convenient recording scheduler offers up to 10 programmable recording profiles and also allows individual assignment of camera profiles. Using these profiles, you can increase the frame rate and alarm resolution, thereby saving considerable disk space during no alarm periods.
You can secure the network, unit, data channels as well as the password via 3 levels of protection. The encoder supports 802.1x authentication which uses a RADIUS server for identification. It secures the web browser access by HTTPS via a SSL certificate that is stored in the unit. Each communication channel, video, audio, or serial I/O can be independently AES encrypted with 128-bit keys for complete data protection.
Built-in Motion+ video motion analysis system is an ideal solution for applications, where examination of basic video content is required. The motion analysis algorithm is based on pixel change, object size filtering capabilities, and advanced tamper-detection capabilities. In conjunction with the IVA (Intelligent Video Analysis), the feature reliably detects, tracks, and analyzes moving objects, while avoiding unwanted alarms from spurious sources in the image.
You can easily view the VIP X1 XF encoder video on a PC via a web browser in the Bosch Video Management System, or integrate it into another video management system. The video encoder is compliant with ONVIF (Open Network Video Interface Forum), which enables exchange and use of information with other network video products to exchange live video, audio, metadata, and control information. Other ONVIF-conformant devices on similar network are automatically detected and connected to video management systems.
|
If you own a Bosch video encoders & decoders and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the Bosch VIP X1 XF Single-Channel Video Encoder F.01U.130.918 in the following formats:
- *.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
|
Additional parameters of the Bosch VIP X1 XF Single-Channel Video Encoder F.01U.130.918:
Power Supply | Via external unit | Input Voltage | 9 to 30 VDC | Power Consumption | Approx. 5 VA | Video | Input: 1 x input Connector: BNC Impedance: 75 ohm, switchable Signal: Analog composite, 0.7 to 1.2 Vpp, NTSC or PAL | Audio | Input/Output: 1 x mono line in, 1 x mono line out Connector: 3.5 mm stereo jack Signal line in: 9 kohm typical, 5.5 Vpp max Signal line out: 3.0 Vpp at 10 kohm typical, 2.3 Vpp at 32 ohm typical, 1.7 Vpp at 16 ohm typical | Alarm | Input: 2 x input Connector: Clamp (non-isolated closing contact) Activation resistance: 10 ohm max | Relays | Output: 2 x output Connector: Clamp Signal: 30 Vpp (SELV), 0.2 A | Com Ports | Clamp, RS‑232/422/485 | Standards | H.264 (ISO/IEC 14496‑10), M‑JPEG, JPEG | Data Rates | 9.6 kbps to 6 Mbps | Resolution | Horizontal x vertical PAL/NTSC 4CIF: 704 x 576/480 (25/30 ips) CIF: 352 x 288/240 (25/30 ips) | GOP Structure | I, IP | Overall IP Delay | 240 ms max | Frame Rate | 1 to 50/60 (PAL/NTSC) | Sampling Frequency | Standard G.711: 300 Hz to 3.4 kHz at 8 kHz sampling rate L16 Audio: 300 Hz to 6.4 kHz at 16 kHz sampling rate | Signal-to-Noise Ratio | > 50 dB | Ethernet | 10/100 Base‑T, auto-sensing, half/full duplex, RJ45 | Protocols | RTP, Telnet, UDP, TCP, IP, HTTP, HTTPS, FTP, DHCP, IGMP V2/V3, ICMP, ARP, SMTP, SNTP, SNMP, RTSP, 802.1x, iSCSI, DynDNS, UPnP | Encryption | TLS 1.0, SSL, AES (license option) | Software Update | Flash ROM, remote programmable | Configuration | Configuration Manager or Web browser | SD Card | Interface: 1 x SD card | Dimensions (HxWxD) | 1.42 x 3.46 x 4.65" (36 x 88 x 118 mm) | Weight | Approx. 0.55 lb (0.25 kg) | Operating Temperature | 32 to 122°F (0 to 50°C) ambient temperature | Relative Humidity | 0 to 95% atmospheric humidity, non-condensing | Thermal Rating | 17 BTU/h max | Package Weight | 1.0 lb | Box Dimensions (LxWxH) | 10.2 x 6.1 x 2.1" | |
The user manual for the Bosch VIP X1 XF Single-Channel Video Encoder F.01U.130.918 can be downloaded in .pdf
format if it did not come with your new video encoders & decoders, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other Bosch users keep a unique electronic library
for Bosch video encoders & decoderss,
where you can use our link to download the user manual for the Bosch VIP X1 XF Single-Channel Video Encoder F.01U.130.918.
The user manual lists all of the functions of the Bosch VIP X1 XF Single-Channel Video Encoder F.01U.130.918,
all the basic and advanced features and tells you how to use the video encoders & decoders.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from Bosch service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the Bosch VIP X1 XF Single-Channel Video Encoder F.01U.130.918. User manuals are also
available on the Bosch website under Surveillance - Surveillance Video - Video Transmission - Video Encoders & Decoders.
Question and answer discussion forum concerning user instructions and resolving problems with the Bosch VIP X1 XF Single-Channel Video Encoder F.01U.130.918 - no comments have been made yet - be the first to add a comment
Post new comment/question/response regarding the Bosch VIP X1 XF Single-Channel Video Encoder F.01U.130.918
|
|
|
|
|