User manual Bron Kobold EWB 200 AC Ballast for DW200 HMI Light K-742-0150-2
Operating instructions and pdf manual for use - Bron Kobold EWB 200 AC Ballast for DW200 HMI Light K-742-0150-2 User manual, User manual Bron Kobold EWB 200 AC Ballast for DW200 HMI Light K-742-0150-2, Bron, Kobold, EWB, 200, AC, Ballast, DW200, HM
User manual for Bron Kobold EWB 200 AC Ballast for DW200 HMI Light K-742-0150-2
Manufacturer: Bron Kobold
Basic description and contents of package
Product classification: Lighting & Studio - Power & Cables - Ballasts
Safety instructions
Startup and operation of the ballasts
Tips for setting up your Bron Kobold
Settings and expert assistance
Contact Bron Kobold service
Troubleshooting
Warranty information
We recommend checking out our discussion threads on the Bron Kobold EWB 200 AC Ballast for DW200 HMI Light K-742-0150-2,
which address similar problems with connecting and setting up Ballasts Bron Kobold.
User manual for the Bron Kobold EWB 200 AC Ballast for DW200 HMI Light K-742-0150-2
The user manual for the Bron Kobold EWB 200 AC Ballast for DW200 HMI Light K-742-0150-2 provides
necessary instructions for the proper use of the product Lighting & Studio - Power & Cables - Ballasts.
The Bron Kobold EWB 200 AC Ballast for DW200 HMI Light is a multi-voltage power supply with 60-100% dimming, flicker-free output and a water-resistant IP43 rating. The ballast offers automatic voltage and lamp detection as well a built-in heater that ensures 1 minute ready time. The unit is dead quiet thanks to its convection cooling system.
If you own a Bron Kobold ballasts and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the Bron Kobold EWB 200 AC Ballast for DW200 HMI Light K-742-0150-2 in the following formats:
*.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
Additional parameters of the Bron Kobold EWB 200 AC Ballast for DW200 HMI Light K-742-0150-2:
Specifications
Lamp Power
200 W
Voltage
85-265 VAC, 50/60 Hz auto-sensing Frequency: 45-400 Hz cutoff at <85 v Ignition possible at 90 V
Dimming Range
100 - 60%
Power Factor
99% @ 110 V, 95% @ 230 V
Power Input Connection
4-Pin, Locking
IP Rating
IP43
Safety Class
I
Efficiency
89%
Temperature Ranges
Ambient: 23 to 113°F (-5 to 45°C) Max operating temperature: 113 to 140°F (45 to 60°C) (auto power reduction to 60%) Storage: -4 to 176° (-20° to 80°C)
Cooling
Convection
Frequency
Lamp: 400 Hz
Stabilization
Power stabilizer with automatic heat-up device achieving lamp operating temperature in 1.0 minute
Flicker Rate
< 5%
Monitoring
Low mains voltage Ignition overload protection Overheating in the ballast unit Lamp shorted Technical fault
Display
LED Green: operating indicator of the lamp Red: warning or operating indicator Yellow: earth connected
Fuse
3.15AT x2
Standards
EN60922, EN60529, EN61000-3-2/A14 grade C EN55011 grade B, 72/23/CEE, 89/336/CEE
The user manual for the Bron Kobold EWB 200 AC Ballast for DW200 HMI Light K-742-0150-2 can be downloaded in .pdf
format if it did not come with your new ballasts, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other Bron Kobold users keep a unique electronic library
for Bron Kobold ballastss,
where you can use our link to download the user manual for the Bron Kobold EWB 200 AC Ballast for DW200 HMI Light K-742-0150-2.
The user manual lists all of the functions of the Bron Kobold EWB 200 AC Ballast for DW200 HMI Light K-742-0150-2,
all the basic and advanced features and tells you how to use the ballasts.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from Bron Kobold service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the Bron Kobold EWB 200 AC Ballast for DW200 HMI Light K-742-0150-2. User manuals are also
available on the Bron Kobold website under Lighting & Studio - Power & Cables - Ballasts.
Question and answer discussion forum concerning user instructions and resolving problems with the Bron Kobold EWB 200 AC Ballast for DW200 HMI Light K-742-0150-2 - no comments have been made yet - be the first to add a comment
Question and answer discussion forum concerning user instructions and resolving problems with the Bron Kobold EWB 200 AC Ballast for DW200 HMI Light K-742-0150-2 - no comments have been made yet - be the first to add a comment