User manual Cisco SPA525G2 5-Line IP Phone with Color Display SPA525G2
Operating instructions and pdf manual for use - Cisco SPA525G2 5-Line IP Phone with Color Display SPA525G2 User manual, User manual Cisco SPA525G2 5-Line IP Phone with Color Display SPA525G2, Cisco, SPA525G2, 5-Line, IP, Phone, with, Color, Display
User manual for Cisco SPA525G2 5-Line IP Phone with Color Display SPA525G2
Overall Rating: 4.0
80% of respondents would recommend this to a friend.
We recommend checking out our discussion threads on the Cisco SPA525G2 5-Line IP Phone with Color Display SPA525G2,
which address similar problems with connecting and setting up Telephones Cisco.
User manual for the Cisco SPA525G2 5-Line IP Phone with Color Display SPA525G2
The user manual for the Cisco SPA525G2 5-Line IP Phone with Color Display SPA525G2 provides
necessary instructions for the proper use of the product Computers & Solutions - Networking - Telephones.
The Cisco SPA525G2 5-Line IP Phone with Color Display is an ideal choice for businesses that require a great user experience with a hosted IP telephony service, an IP private branch exchange, or a large-scale IP Centrex deployment. The SPA525G2 features SPA voice over IP technology with high-quality hardware providing additional connectivity via Bluetooth, PoE (802.3af), or a Wireless-G client (802.11g).
If you own a Cisco telephones and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the Cisco SPA525G2 5-Line IP Phone with Color Display SPA525G2 in the following formats:
*.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
Additional parameters of the Cisco SPA525G2 5-Line IP Phone with Color Display SPA525G2:
Specifications
Wi-Fi Security
Wired Equivalent Privacy (WEP), 64 or 128 bit
Wi-Fi Protected Access (WPA), Personal and Enterprise
WPA2, Personal and Enterprise
Wi-Fi Protected Setup (WPS)
Ethernet
10/100 PC switch port enables LAN connectivity to a co-located PC. Can designate separate VLANs (802.1Q) for the PC and Cisco IP phones, providing improved security and reliability of voice and data traffic. 802.3af PoE WAN port; disabled when phone is used in Wi-Fi mode
Volume Control
Volume-control toggle provides easy decibel-level adjustments of the handset, monitor speaker, and ringer
Applications
Customizable screen saver on phone display (Photo Album)
Music player (MP3)
RSS web services
Cisco MonitorView
SIP third-party call control for server-based applications
Lightweight Directory Access Protocol (LDAP) and Cisco XML- based corporate directory support
Cisco XML services interface (XSI)
Call Control and Audio Features
Call hold
Music on hold*
Call waiting
Caller ID name and number and outbound caller ID blocking
Caller ID mapping for incoming calls
Outbound caller ID blocking
Call transfer - attended or blind
Call conferencing - hosted (N-party) or local (3-party)
Call forwarding - unconditional, no answer, on busy
Visual voice message waiting indicator (VMWI)
Shared/bridge line appearance*
Call pickup - selective and group*
Call park and unpark*
Call back on busy
Call blocking - anonymous and selective
Do not disturb
Intercom*
Group paging*
Extension mobility*
Configurable dial/numbering plan support with inter-digit timers - per line
URL (IP) dialing support
Distinctive ringing based on calling and called number
Supplementary services feature activation codes
Supplementary services announcements codes
Configurable supplementary services soft keys
Individual volume setting per audio path (headset/handset/speaker)
*Requires support by SIP/SPCP client management server
Signaling Protocol Support
SPCP
SIP version 2 (RFC 3261, RFC 2543, RFC 3263,
RFC 3264, RFC 3275)
Voice Features
SIP proxy redundancy - dynamic via DNS SRV, A records
Re-registration with primary SIP proxy server
SIP support in Network Address Translation (NAT) networks, including simple traversal of User Datagram Protocol (UDP) through NAT (serial tunnel [STUN])
Codec name assignment
Voice algorithms: G.711 (A-law and µ-law)
G.726 (32 kbps)
G.729 AB
G.722, Wideband Audio
Dynamic payload support
Adjustable audio frames per packet
Dual-tone multi-frequency (DTMF): In-band and out-of-band (RFC 2833), SIP INFO (RFC 2976)
Flexible dial plan support with inter-digit timers
IP address/Uniform Resource Identifier (URI) dialing support
Call progress tone generation
Jitter buffer - adaptive
Frame loss concealment
Voice activity detection (VAD) with silence suppression
Point-to-Point Protocol over Ethernet (PPoE) client (RFC 2516)
Internet Control Message Protocol (ICMP) (RFC 792)
TCP (RFC 793)
UDP (RFC 768)
Real Time Protocol (RTP) (RFC 1889, 1890)
Real Time Control Protocol (RTCP) (RFC 1889), RTCP-XR (RFC 3611)
Differentiated Services (DiffServ) (RFC 2475), type of service (ToS) (RFC 791, 1349)
VLAN tagging 802.1p/Q
Simple Network Time Protocol (SNTP) (RFC 2030)
Security Features
Password-protected system reset to factory default
Password-protected administrator and user access authority
HTTPS with factory-installed client certificate
HTTP digest - encrypted authentication via MD5 (RFC 1321)
Up to 256-bit Advanced Encryption Standard (AES) encryption
SIP over TLS for signaling encryption
AnyConnect SSL VPN
SRTP for media encryption
Additional Features
Lighted line keys: 5 illuminated call appearance line buttons with tricolor LEDs
Hold key: Puts current call on hold
Voicemail key: 1-button access to voicemail
Menu key: Accesses call history, directory, speed dials, MP3 player, web applications, user preferences, network configuration, device administration, and status
Lighted mute key: Lights up red when the call is on mute and turns off when mute is removed. Also lights red in the event of a network failure
Lighted headset key: Lights up green when pressed and using a Bluetooth or 2.5-mm headset for hands-free calling
Lighted speakerphone key: Activates full-duplex speakerphone; stays lit while speakerphone is on
Lighted message waiting indicator: Lights when there is new voicemail; visible on the phone chassis above the LCD screen; stays lit until the new voicemail has been processed by the user
Graphical display: Color 3.2" QVGA (320 x 240 pixels) backlit LCD graphical display
5-way navigational buttons: Navigating menus and multimedia applications
4 soft-key buttons: Dynamically present calling options to the user
Note:Mfr# PA100-NA power adapter is required, which is not included with the product.
The user manual for the Cisco SPA525G2 5-Line IP Phone with Color Display SPA525G2 can be downloaded in .pdf
format if it did not come with your new telephones, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other Cisco users keep a unique electronic library
for Cisco telephoness,
where you can use our link to download the user manual for the Cisco SPA525G2 5-Line IP Phone with Color Display SPA525G2.
The user manual lists all of the functions of the Cisco SPA525G2 5-Line IP Phone with Color Display SPA525G2,
all the basic and advanced features and tells you how to use the telephones.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from Cisco service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the Cisco SPA525G2 5-Line IP Phone with Color Display SPA525G2. User manuals are also
available on the Cisco website under Computers & Solutions - Networking - Telephones.
Question and answer discussion forum concerning user instructions and resolving problems with the Cisco SPA525G2 5-Line IP Phone with Color Display SPA525G2 - no comments have been made yet - be the first to add a comment