|
User manual for Crown Audio CTs 4200USP/CN - 4-Channel Power CTS4200AUSPCN
- Manufacturer: Crown Audio
- Basic description and contents of package
- Product classification: Pro Audio - Installation Sound - Standard Amplifiers
- Safety instructions
- Startup and operation of the standard amplifiers
- Tips for setting up your Crown Audio
- Settings and expert assistance
- Contact Crown Audio service
- Troubleshooting
- Warranty information
|
We recommend checking out our discussion threads on the Crown Audio CTs 4200USP/CN - 4-Channel Power CTS4200AUSPCN,
which address similar problems with connecting and setting up Standard Amplifiers Crown Audio.
|
User manual for the Crown Audio CTs 4200USP/CN - 4-Channel Power CTS4200AUSPCN
The user manual for the Crown Audio CTs 4200USP/CN - 4-Channel Power CTS4200AUSPCN provides
necessary instructions for the proper use of the product Pro Audio - Installation Sound - Standard Amplifiers.
The Crown CTs 4200USP/CN is a 4-channel network-ready power amplifier housed in a 2RU rack, offering 180 watts per channel at 8 ohms, designed for fixed installation use.
|
If you own a Crown Audio standard amplifiers and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the Crown Audio CTs 4200USP/CN - 4-Channel Power CTS4200AUSPCN in the following formats:
- *.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
|
Additional parameters of the Crown Audio CTs 4200USP/CN - 4-Channel Power CTS4200AUSPCN:
| Power Rating | Dual, 4 Channels Driven:
260W @ 4 ohms(per channel)
180W @ 8 ohms(per channel)
220W @ 70V (per channel)
Dual, 1 Channel Driven:
270W @ 4 ohms(per channel)
220W @ 8 ohms(per channel)
250W @ 70V (per channel)
Bridge-Mono, 2 Channel Pairs Driven:
520W @ 8 ohms(per channel pair)
400W @ 16 ohms (per channel pair)
220W @ 100V (per channel pair)
Bridge-Mono, 1 Channel Pair Driven:
560W @ 8 ohms(per channel pair)
440W @ 16 ohms(per channel pair)
250W @ 100V (per channel pair) | | Damping Factor | 10 Hz - 400 Hz: >180 | | Input Sensitivity | 1.4V | | Input Impedance | 20 kOhms balanced(nominal)
10 kOhms unbalanced(nominal) | | Gain | 4/8 ohm Operation: 20:1(26 dB)
70V Operation: 50:1(34 dB)
100V Operation: 71.4:1(37 dB) | | Frequency Response | 20 Hz - 20 kHz +/-0.5 dB @ 1W | | Signal-to-Noise Ratio | 100 dB unweighted(20 Hz - 20 kHz, below rated power) | | Total Harmonic Distortion (THD) | <0.05% @1W, from 20 Hz - 20 kHz | | Input Connections | 2 x Removable Phoenix Balanced Barrier Blocks | | Output Connectors | 2 x 4-pole Terminal Strips with Touch-Proof Covers*
*1 for every 2 channels | | Controls Front Panel | 1 x Power Switch | | Controls (Rear) | 4 x 21-position Rotary Channel Level Trim Controls(-70 - 0 dB)
2 x 4-position Dual/Bridge Mode Switches | | Indicators | Front Panel:
2 x Yellow LED Bridge Mode Indicators
4 x Green LED Ready Indicators
4 x Green LED Input Signal Indicators
4 x Red LED Thermal Indicators
4 x Red LED Fault Indicators
1 x Yellow LED IQ Loop Data Indicator
1 x Blue LED Power Indicator
Rear Panel: None | | Cooling | Continuously Variable Speed Forced Air, Front to Back Airflow | | Power Consumption | 58W, Idle, All Channels 4/8 ohm Mode*
77W, Idle, All Channels 70V Mode*
*120 VAC | | Dimensions | 19 x 3.5 x 16.25" (483 x 89 x 413mm) | | Weight | 27.8 lb (12.5 kg) | | Specialties | 4-channel Rackmount Installation Amplifier
4 Switchable Modes include 70 and 100V Operation
Variable Speed Fan Cooling | | Package Weight | 30.0 lb | | Box Dimensions (LxWxH) | 24.0 x 22.0 x 9.0" | |
The user manual for the Crown Audio CTs 4200USP/CN - 4-Channel Power CTS4200AUSPCN can be downloaded in .pdf
format if it did not come with your new standard amplifiers, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other Crown Audio users keep a unique electronic library
for Crown Audio standard amplifierss,
where you can use our link to download the user manual for the Crown Audio CTs 4200USP/CN - 4-Channel Power CTS4200AUSPCN.
The user manual lists all of the functions of the Crown Audio CTs 4200USP/CN - 4-Channel Power CTS4200AUSPCN,
all the basic and advanced features and tells you how to use the standard amplifiers.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from Crown Audio service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the Crown Audio CTs 4200USP/CN - 4-Channel Power CTS4200AUSPCN. User manuals are also
available on the Crown Audio website under Pro Audio - Installation Sound - Standard Amplifiers.
Question and answer discussion forum concerning user instructions and resolving problems with the Crown Audio CTs 4200USP/CN - 4-Channel Power CTS4200AUSPCN - no comments have been made yet - be the first to add a comment
Post new comment/question/response regarding the Crown Audio CTs 4200USP/CN - 4-Channel Power CTS4200AUSPCN
|
|
|
|
|
