|
User manual for D-Link DGS-1210-28P Web Smart 28-Port PoE Gigabit DGS-1210-28P
Overall Rating: 5.0
100% of respondents would recommend this to a friend.
- Manufacturer: D-Link
- Basic description and contents of package
- Product classification: Computers & Solutions - Networking - Network Switches, Bridges & Hubs
- Safety instructions
- Startup and operation of the network switches, bridges & hubs
- Tips for setting up your D-Link
- Settings and expert assistance
- Contact D-Link service
- Troubleshooting
- Warranty information
- Price: 390 USD
|
We recommend checking out our discussion threads on the D-Link DGS-1210-28P Web Smart 28-Port PoE Gigabit DGS-1210-28P,
which address similar problems with connecting and setting up Network Switches, Bridges & Hubs D-Link.
|
User manual for the D-Link DGS-1210-28P Web Smart 28-Port PoE Gigabit DGS-1210-28P
The user manual for the D-Link DGS-1210-28P Web Smart 28-Port PoE Gigabit DGS-1210-28P provides
necessary instructions for the proper use of the product Computers & Solutions - Networking - Network Switches, Bridges & Hubs.
The DGS-1210-28P Web Smart 28-Port PoE Gigabit Switch from D-Link features D-Link Green 3.0 Technology for increased energy efficiency. This switch complies with the IEEE 802.3az Energy Efficient Ethernet Standard. Support for IPv6 management and configurations ensure your network remains protected after the upgrade from IPv4 to IPv6. By offering multiple management options, the DGS-121028P allows for quick deployment, infrastructure expansion, and seamless upgrades. Targeting small and medium sized businesses, this Web Smart Switch provides functionality, security, and manageability for a fraction of the standard cost of ownership. The DGS-1210-28P is a PoE Web Smart Switch that provides 24 10/100/1000 Base-T PoE ports with 4 Gigabit SFP ports. In addition to IEEE 802.3af compliance, ports 1-4 provides up to 30 watts of power output following IEEE 802.3at. The design allows more flexibility in power allocation for a variety of powered devices with affordable installation costs.
|
If you own a D-Link network switches, bridges & hubs and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the D-Link DGS-1210-28P Web Smart 28-Port PoE Gigabit DGS-1210-28P in the following formats:
- *.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
|
Additional parameters of the D-Link DGS-1210-28P Web Smart 28-Port PoE Gigabit DGS-1210-28P:
Port Standards and Functions | • IEEE 802.3 10BASE-T Ethernet (twisted-pair copper) • IEEE 802.3u 100BASE-TX Fast Ethernet (twisted-pair copper) • IEEE 802.3ab 1000BASE-T Gigabit Ethernet (twisted-pair copper) • Auto-negotiation • IEEE 802.3x Flow Control • IEEE 802.3af compliance • IEEE 802.3at compliance | Number of Ports | • 24 10/100/1000 Mbps PoE compatible • 4 Gigabit SFP | Network Cables | • UTP Cat.5, Cat.5e (100m max) • EIA/TIA-568 100-ohm STP (100m max) | Full/Half Duplex | • Full/half duplex for 10/100Mbps speeds • Full duplex for Gigabit speed | Media Interface Exchange | • Auto MDI/MDI-X adjustment for all twisted-pair ports | Switching Capacity | • 56 Gbps | Transmission Method | • Store-and-forward | MAC Address Table Size | • 16,000 entries per device | MAC Address Update | • Up to 256 static MAC entries • Enable/disable auto-learning of MAC addresses | Maximum 64 bytes Packet Forwarding Rate | • 41.7 Mpps | Packet Buffer Memory | • 1 MB per device | PoE Standard | • IEEE 802.3af and IEEE 802.3at | PoE Capable Ports | • Ports 1 to 4: up to 30W • Ports 5 to 24: up to 15.4W | PoE Power Budget | • Max. 185 W | Diagnostic LEDs | • Power (per device) • Link/Activity/Speed (per 10/100/1000Mbps port) • Link/Activity (per SFP port) • Fan (per device) • PoE Max (per Device) (DGS-1210-28P only) • Button to switch LED display mode between PoE and Link/Activity (DGS-1210-28P only) | MTBF | • 224,530 hours | Certifications | • FCC Class A • CE Class A • ICES-003 • VCCI Class A • C-Tick • BSMI | Safety | • cUL • CE LVD | L2 Features | • MAC Address Table - 16,000 entries • Flow Control - 802.3x Flow Control - HOL Blocking Prevention • IGMP Snooping - IGMP v1/v2 Snooping - Supports 256 IGMP groups - Supports at least 64 static multicast addresses - IGMP per VLAN - Supports IGMP Snooping Querier • Spanning Tree Protocol - 802.1D STP - 802.1w RSTP • 802.3ad Link Aggregation - DGS-1210-28P: Max. 14 groups per device/8 ports per group - DGS-1210-52: Max. 26 groups per device/8 ports per group • Port Mirroring - One-to-One, Many-to-One - Supports Mirroring for Tx/Rx/Both • Multicast Filtering - Forwards all unregistered groups - Filters all unregistered groups • LLDP, LLDP-MED | VLAN | • 802.1Q • VLAN Group - Max 256 static VLAN groups - Max 4094 VIDs • Management VLAN • Asymmetric VLAN • Auto Voice VLAN - Max. 10 user defined OUI - Max. 8 default OUI • Auto Surveillance VLAN | QoS | • 802.1p Quality of Service • 4 Queues per port • Queue Handling - Strict - Weighted Round Robin (WRR) • CoS based on - 802.1p Priority Queues - DSCP - ToS1 • Bandwidth Control - Port-based (Ingress/Egress, min. granularity 64 Kb/s) | Access Control List | • DGS-1210-28P: - Max. 50 profiles - Max. 240 rules shared by profiles - Single or multiple ports (each rule) • DGS-1210-52: - Max. 50 profiles - Max. 450 rules shared by profiles • ACL based on - MAC Address - IPv4 Address (ICMP/IGMP/TCP/UDP) - 802.1p Priority - DSCP - Ethertype • ACL Actions - Permit - Deny | Security | • Port Security - Supports up to 64 MAC addresses per port • Broadcast/Multicast/Unicast Storm Control • Static MAC • D-Link Safeguard Engine • DHCP Server Screening • Trusted Host • ARP Spoofing Prevention - Max. 64 entries • SSL - Supports v1/v2/v3 - Support IPv4/IPv6 • Traffic Segmentation • Smart Binding - Supports 512 entries of IP-MAC-Port binding - Discover connected devices and click to bind - Inspect ARP packets and/or IP packets - Supports DHCP Snooping | AAA | • 802.1X Port-based Authentication - Supports RADIUS Server - Supports EAP, OTP, TLS, TTLS, PEAP | OAM | • Cable Diagnostics • Factory Reset | MIB | • 1213 MIB II • 1493 Bridge MIB • 1907 SNMP v2 MIB • 1215 Trap Convention MIB • 2233 Interface Group MIB • D-Link Private MIB • Power-Ethernet MIB • LLDP MIB | RFC | • RFC 783 TFTP • RFC 854 Telnet Server • RFC 951 BootP/DHCP Client • RFC 1157 SNMP v1, v2c, v3 • RFC 1213 MIB II, IF MIB • RFC 1215 MIB Traps Convention • RFC 1350 TFTP • RFC 1493 Bridge MIB • RFC 1542 BootP/DHCP Client • RFC 1769 SNTP • RFC 1901 SNMP v1, v2c, v3 • RFC 1907 SNMP v2c MIB • RFC 1908 SNMP v1, v2c, v3 • RFC 2068 FCS • RFC 2131 BootP/DHCP Client • RFC 2138 RADIUS Authentication • RFC 2139 RADIUS Authentication • RFC 2233 Interface Group MIB • RFC 2246 SSL • RFC 2475 • RFC 2570 SNMP v1, v2c, v3 • RFC 2575 SNMP v1, v2c, v3 • RFC 2598 CoS • RFC 2616 FCS • RFC 2618 RADIUS Authentication • RFC 2819 RMON v1 • RFC 2865 RADIUS Authentication • RFC 3164 System Log • RFC 3195 System Log • RFC 3411-17 SNMP • RFC 3621 Power Ethernet MIB | Management | • Multi-Language Web-based GUI - English (default) - Simplified Chinese - Traditional Chinese - French - German - Italian - Japanese - Portuguese - Russian - Spanish • SmartConsole Utility • Simplified CLI • Telnet Server • TFTP Client • Configurable MDI/MDIX • SNMP - Supports v1, v2c, v3 • SNMP Trap • System Log - Max. 500 log entries • BootP/DHCP Client • SNTP • ICMPv6 • IPv4/v6 Dual Stack • DHCP Auto Configuration • RMON v1 • Time-based PoE (DGS-1210-28P only) | D-Link Green 3.0 Technology | • Power Saving by: - Link Status - Cable Length detection • LED or Port Shutoff • Port Standby mode • System Hibernation mode | AC Input | • 100 to 240 VAC 50/60Hz internal universal power supply | Maximum Power Consumption | • 238.4 W (PoE on), 27.4 W (PoE off) | Standby Power Consumption | • 16W/110V, 14W/240V | Fan Quantity | • Three smart fans | Acoustics | • 52.2 dB(A) | Heat Dissipation | • 813.42 BTU/hr. | Operating Temperature | • 41 to 122°F / -5 to 50°C | Storage Temperature | • -4 to 158°F / -20 to 70°C | Operating Humidity | • 0 to 95% non-condensing | Storage Humidity | • 0 to 95% non-condensing | Dimensions | 17.32 x 9.84 x 1.73" / 440 x 250 x 44 mm 19-inch standard rack mounting width, 1U height | Weight | 8.15 lb / 3.7 kg | Package Weight | 7.9 lb | Box Dimensions (LxWxH) | 20.6 x 14.4 x 3.8" | |
The user manual for the D-Link DGS-1210-28P Web Smart 28-Port PoE Gigabit DGS-1210-28P can be downloaded in .pdf
format if it did not come with your new network switches, bridges & hubs, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other D-Link users keep a unique electronic library
for D-Link network switches, bridges & hubss,
where you can use our link to download the user manual for the D-Link DGS-1210-28P Web Smart 28-Port PoE Gigabit DGS-1210-28P.
The user manual lists all of the functions of the D-Link DGS-1210-28P Web Smart 28-Port PoE Gigabit DGS-1210-28P,
all the basic and advanced features and tells you how to use the network switches, bridges & hubs.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from D-Link service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the D-Link DGS-1210-28P Web Smart 28-Port PoE Gigabit DGS-1210-28P. User manuals are also
available on the D-Link website under Computers & Solutions - Networking - Network Switches, Bridges & Hubs.
Question and answer discussion forum concerning user instructions and resolving problems with the D-Link DGS-1210-28P Web Smart 28-Port PoE Gigabit DGS-1210-28P - no comments have been made yet - be the first to add a comment
Post new comment/question/response regarding the D-Link DGS-1210-28P Web Smart 28-Port PoE Gigabit DGS-1210-28P
|
|
|
|
|