User manual DATAPATH VisionSDI2 Dual-Channel 3G/HD/SD Video VISIONSDI2
Operating instructions and pdf manual for use - DATAPATH VisionSDI2 Dual-Channel 3G/HD/SD Video VISIONSDI2 User manual, User manual DATAPATH VisionSDI2 Dual-Channel 3G/HD/SD Video VISIONSDI2, DATAPATH, VisionSDI2, Dual-Channel, 3G/HD/SD, Video, VIS
User manual for DATAPATH VisionSDI2 Dual-Channel 3G/HD/SD Video VISIONSDI2
Manufacturer: DATAPATH
Basic description and contents of package
Product classification: A/V Presentation - Signal Processing & Distribution - Multi Viewer Accessories
Safety instructions
Startup and operation of the multi viewer accessories
Tips for setting up your DATAPATH
Settings and expert assistance
Contact DATAPATH service
Troubleshooting
Warranty information
We recommend checking out our discussion threads on the DATAPATH VisionSDI2 Dual-Channel 3G/HD/SD Video VISIONSDI2,
which address similar problems with connecting and setting up Multi Viewer Accessories DATAPATH.
User manual for the DATAPATH VisionSDI2 Dual-Channel 3G/HD/SD Video VISIONSDI2
The user manual for the DATAPATH VisionSDI2 Dual-Channel 3G/HD/SD Video VISIONSDI2 provides
necessary instructions for the proper use of the product A/V Presentation - Signal Processing & Distribution - Multi Viewer Accessories.
The VisionSDI2 Dual-Channel 3G/HD/SD Video Capture Card from DATAPATH is a dual-channel stand-alone PCI Express x4 plug-in HD-SDI video capture card. The card supports SD-SDI, HD-SDI and 3G-SDI, including 2K Digital Film Resolution modes. The VisionSDI2 has a 650 MB/s transfer bus bandwidth, and is suitable for a wide range of applications, such as display wall controllers, broadcasting, machine vision, and advanced medical applications.
The Vision range of video capture cards are fully integrated with the Datapath family of video wall multi-display products, providing high-resolution digital video support. The VisionSDI2 video capture is supplied with a software application for configuring the format of the input sources and displaying the data. Simply connect your video source into the capture card, run the VisionSDI2 application to automatically detect the video source format and display the captured video in a window on your desktop.
The Datapath Wall Control video wall software enables you to configure your multi-screen display, launch video overlays and create a video wall layout configuration. With the full version it is possible to save layouts and recall them for future use and also operate Wall Control video wall software on a remote PC via a network connection. The Wall Control presents a representational window of the entire display wall showing position and size of video windows.
If you own a DATAPATH multi viewer accessories and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the DATAPATH VisionSDI2 Dual-Channel 3G/HD/SD Video VISIONSDI2 in the following formats:
*.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
Additional parameters of the DATAPATH VisionSDI2 Dual-Channel 3G/HD/SD Video VISIONSDI2:
Specifications
Card Format
PCI Express x4, plug-in card PCI Express bus master with scatter gather DMA
Connectors
2 x BNC, SDI input 2 x BNC, SDI input loop through output
Data Rate
650 MB/s, maximum
Bit Rate
Maximum SDI: 3 Gb/s
Capture Resolution
2048 x 1556 at 24 fps, maximum 1920 x 1080 at 60 fps, maximum
Frame Buffer Memory
64 MB per channel (total 128 MB)
Input Detection
Supports SMPTE - 352 Payload Identifiers
Pixel Format
RGB: 5-5-5, 5-6-5, or 8-8-8 (24 bit, 32 bit) YUV: 4:2:2 MONO: 8 bit
Update Rate
User defined. Captured frame rate will match the source providing maximum data rate (650 MB/s) is not exceeded Multi-buffered to eliminate tearing artifacts
Video Modes
SD-SDI (480i / 576i) HD-SDI (up to 1080i) 3G-SDI (up to 1080p) 2k Digital Cinema modes
Operating System Support
Windows XP, Windows Vista, Windows Server 2003, Windows Server 2008, Windows 7 and Windows 8
Power Requirements
Maximum current at 3.3 V - 0.45 A Maximum current at 12 V - 0.85 A Maximum power 12 W
Temperature
Operating: 32 to 95°F (0 to 35°C) Storage: -4 to 158°F (-20 to 70°C)
The user manual for the DATAPATH VisionSDI2 Dual-Channel 3G/HD/SD Video VISIONSDI2 can be downloaded in .pdf
format if it did not come with your new multi viewer accessories, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other DATAPATH users keep a unique electronic library
for DATAPATH multi viewer accessoriess,
where you can use our link to download the user manual for the DATAPATH VisionSDI2 Dual-Channel 3G/HD/SD Video VISIONSDI2.
The user manual lists all of the functions of the DATAPATH VisionSDI2 Dual-Channel 3G/HD/SD Video VISIONSDI2,
all the basic and advanced features and tells you how to use the multi viewer accessories.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from DATAPATH service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the DATAPATH VisionSDI2 Dual-Channel 3G/HD/SD Video VISIONSDI2. User manuals are also
available on the DATAPATH website under A/V Presentation - Signal Processing & Distribution - Multi Viewer Accessories.
Question and answer discussion forum concerning user instructions and resolving problems with the DATAPATH VisionSDI2 Dual-Channel 3G/HD/SD Video VISIONSDI2 - no comments have been made yet - be the first to add a comment
Question and answer discussion forum concerning user instructions and resolving problems with the DATAPATH VisionSDI2 Dual-Channel 3G/HD/SD Video VISIONSDI2 - no comments have been made yet - be the first to add a comment