|
User manual for DPA Microphones d:fine In-Ear Broadcast Headset Mic FIDB10-IE1-B
- Manufacturer: DPA Microphones
- Basic description and contents of package
- Product classification: Pro Audio - Location Sound - Headsets
- Safety instructions
- Startup and operation of the headsets
- Tips for setting up your DPA Microphones
- Settings and expert assistance
- Contact DPA Microphones service
- Troubleshooting
- Warranty information
- Price: 900 USD
Click to enlarge image
|
We recommend checking out our discussion threads on the DPA Microphones d:fine In-Ear Broadcast Headset Mic FIDB10-IE1-B,
which address similar problems with connecting and setting up Headsets DPA Microphones.
|
User manual for the DPA Microphones d:fine In-Ear Broadcast Headset Mic FIDB10-IE1-B
The user manual for the DPA Microphones d:fine In-Ear Broadcast Headset Mic FIDB10-IE1-B provides
necessary instructions for the proper use of the product Pro Audio - Location Sound - Headsets.
The black d:fine Directional In-Ear Broadcast Headset Microphone from DPA is a single-ear mount, single in-ear, broadcast, and communication headset microphone, which is lightweight and allows for single-channel monitoring. It can be used by TV broadcasters, radio hosts, sports announcers, producers, theater actors, and more.
|
If you own a DPA Microphones headsets and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the DPA Microphones d:fine In-Ear Broadcast Headset Mic FIDB10-IE1-B in the following formats:
- *.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
|
Additional parameters of the DPA Microphones d:fine In-Ear Broadcast Headset Mic FIDB10-IE1-B:
Directional Characteristic | Directional | Principle of Operation | Pressure gradient | Cartridge Type | Pre-polarized condenser | Frequency Range | 20 Hz to 20 kHz ± 2 dB: (Near field) 0.8 to 1.2" (2-3 cm) 100 Hz to 20 kHz with 4-6 dB soft boost at 15 kHz | Sensitivity | Nominal, ± 3 dB at 1 kHz: 6 mV/Pa; -44 dB re. 1 V/Pa | Equivalent Noise Level | A-Weighted: Typ. 28 dB (A) re. 20 µPa (max. 30 dB (A)) ITU-R BS.468-4: Typ. 40 dB (max. 42 dB) | Signal to Noise Ratio | A-Weighted, re. 1 kHz at 1 Pa (94 dB SPL): Typ. 66 dB (A) | Total Harmonic Distortion (THD) | <1% up to 123 dB SPL peak; <1% up to 120 dB SPL RMS sine | Dynamic Range | Typ. 95 dB | Maximum SPL | Peak Before Clipping: 144 dB | Output Impedance | From MicroDot: 30 - 40 ohms. From DAD6001-BC: 100 ohms | Cable Drive Capability | Up to 984' (300 m) with DAD6001-BC XLR adapter | Output Balance Principle | Signal balanced with DAD6001-BC XLR adapter | Common Mode Rejection Ratio | >60 dB from 50 Hz to 15 kHz with DAD6001-BC XLR adapter | Current Consumption | Typ. 1.5 mA (microphone). 3.5 mA with DAD6001-BC XLR adapter | Connector | Hardwired with TA4F connector for Shure transmitters | Boom Length | Microphone: Standard: 4.7" (120 mm) | Polarity | +V at MicroDot pin for positive sound pressure (and pin 2 on DAD6001-BC XLR adapter) | Electro Magnetic Compatibility | Fully compatible | Temperature Range | -40 to 113°F (40 to 45°C) | Relative Humidity | Up to 90% | Cable Diameter | Microphone Cable: 0.06" (1.6 mm) In-Ear Cable: 0.08" (1.95 mm) | Cable Length | 4.3' (1.3 m) | Weight | 0.92 oz (26 g) | Type | Dynamic earplug (acknowledged Hi-Fi plugs) | Connector | 1/8" (3.5 mm) stereo mini-jack | In-Ear Type | Single: Signal at mini-jack tip Dual: Signal at mini-jack tip (left) and ring (right) | Sensitivity | 107 dBV | Impedance | Nominal: 18 ohms | |
The user manual for the DPA Microphones d:fine In-Ear Broadcast Headset Mic FIDB10-IE1-B can be downloaded in .pdf
format if it did not come with your new headsets, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other DPA Microphones users keep a unique electronic library
for DPA Microphones headsetss,
where you can use our link to download the user manual for the DPA Microphones d:fine In-Ear Broadcast Headset Mic FIDB10-IE1-B.
The user manual lists all of the functions of the DPA Microphones d:fine In-Ear Broadcast Headset Mic FIDB10-IE1-B,
all the basic and advanced features and tells you how to use the headsets.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from DPA Microphones service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the DPA Microphones d:fine In-Ear Broadcast Headset Mic FIDB10-IE1-B. User manuals are also
available on the DPA Microphones website under Pro Audio - Location Sound - Headsets.
Question and answer discussion forum concerning user instructions and resolving problems with the DPA Microphones d:fine In-Ear Broadcast Headset Mic FIDB10-IE1-B - no comments have been made yet - be the first to add a comment
Post new comment/question/response regarding the DPA Microphones d:fine In-Ear Broadcast Headset Mic FIDB10-IE1-B
|
|
|
|
|