User manual for Earthworks M50 - Measurement Microphone M50
- Manufacturer: Earthworks
- Basic description and contents of package
- Product classification: Pro Audio - Location Sound - Stereo & Specialty
- Safety instructions
- Startup and operation of the stereo & specialty
- Tips for setting up your Earthworks
- Settings and expert assistance
- Contact Earthworks service
- Troubleshooting
- Warranty information
|
We recommend checking out our discussion threads on the Earthworks M50 - Measurement Microphone M50,
which address similar problems with connecting and setting up Stereo & Specialty Earthworks.
|
User manual for the Earthworks M50 - Measurement Microphone M50
The user manual for the Earthworks M50 - Measurement Microphone M50 provides
necessary instructions for the proper use of the product Pro Audio - Location Sound - Stereo & Specialty.
The Earthworks M50 is a professional measurement microphone intended for large room calibration. The ultra wide frequency response of 3Hz to 50kHz is flat throughout the entire spectrum and results in accurate room calibration using Smaart, MLSSA, SIMM and TEF based systems. The small element yields an omni-directional pattern resulting in a wide pick up area at the front and sides of the microphone capsule. The M50 ships with a microphone clip and a 1/2" calibrator adaptor.
|
If you own a Earthworks stereo & specialty and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the Earthworks M50 - Measurement Microphone M50 in the following formats:
- *.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
|
Additional parameters of the Earthworks M50 - Measurement Microphone M50:
Transducer | Condenser | Polar Pattern | Omnidirectional | Frequency Response | 3 Hz to 50 kHz ±1/-3 dB | Dynamic Range (Typical) | 72 dB | Signal-to-Noise Ratio | 22 dB SPL Equivalent (A-weighted) | Maximum Input Sound Level | 142 dB SPL | Power Requirements | +48V Phantom, 10 mA | Output Impedance | 600Ω between pin 2 and 3 | Output Connectors | XLR intended to drive a balanced transformerless input Pin2+ | Pad | No | Low Frequency Roll-Off | No | Dimensions | 9 x 0.9" (229 x 22 mm)(Length x Diameter) | Weight | 0.5 lb (225 g) | Package Weight | 3.1 lb | Box Dimensions (LxWxH) | 11.9 x 8.4 x 4.3" | |
The user manual for the Earthworks M50 - Measurement Microphone M50 can be downloaded in .pdf
format if it did not come with your new stereo & specialty, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other Earthworks users keep a unique electronic library
for Earthworks stereo & specialtys,
where you can use our link to download the user manual for the Earthworks M50 - Measurement Microphone M50.
The user manual lists all of the functions of the Earthworks M50 - Measurement Microphone M50,
all the basic and advanced features and tells you how to use the stereo & specialty.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from Earthworks service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the Earthworks M50 - Measurement Microphone M50. User manuals are also
available on the Earthworks website under Pro Audio - Location Sound - Stereo & Specialty.
Question and answer discussion forum concerning user instructions and resolving problems with the Earthworks M50 - Measurement Microphone M50 - no comments have been made yet - be the first to add a comment
Post new comment/question/response regarding the Earthworks M50 - Measurement Microphone M50
|
|