PDF-MANUALS.com | User manual here!
User manual

User manual Electro-Voice RE20 Microphone & dbx 286s Preamp Broadcaster

Operating instructions and pdf manual for use - Electro-Voice RE20 Microphone & dbx 286s Preamp Broadcaster User manual, User manual Electro-Voice RE20 Microphone & dbx 286s Preamp Broadcaster, Electro-Voice, RE20, Microphone, &, dbx, 286s, Preamp,

User manual for Electro-Voice RE20 Microphone & dbx 286s Preamp Broadcaster

Electro-Voice RE20 Microphone & dbx 286s Preamp Broadcaster
  • Manufacturer: Electro-Voice
  • Basic description and contents of package
  • Product classification: Pro Audio - Location Sound - Broadcast/Voice Over
  • Safety instructions
  • Startup and operation of the broadcast/voice over
  • Tips for setting up your Electro-Voice
  • Settings and expert assistance
  • Contact Electro-Voice service
  • Troubleshooting
  • Warranty information
  • Price: 800 USD
We recommend checking out our discussion threads on the Electro-Voice RE20 Microphone & dbx 286s Preamp Broadcaster, which address similar problems with connecting and setting up Broadcast/Voice Over Electro-Voice.


User manual for the Electro-Voice RE20 Microphone & dbx 286s Preamp Broadcaster

The user manual for the Electro-Voice RE20 Microphone & dbx 286s Preamp Broadcaster provides necessary instructions for the proper use of the product Pro Audio - Location Sound - Broadcast/Voice Over.

The Electro-Voice RE20 Microphone & dbx 286s Preamp Broadcaster Kit from B&H gives you everything you need to make high-quality broadcast voice recordings for radio, podcasts, and other voice recordings. The package includes the Electro-Voice RE20 Microphone, dbx 286s Microphone Preamp, a mic suspension shockmount, a 2-section broadcast arm with XLR cable, and a foam windscreen.
If you own a Electro-Voice broadcast/voice over and have a user manual in electronic form, you can upload it to this website using the link on the right side of the screen.

You can upload and download the manual for the Electro-Voice RE20 Microphone & dbx 286s Preamp Broadcaster in the following formats:
  • *.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
Additional parameters of the Electro-Voice RE20 Microphone & dbx 286s Preamp Broadcaster:
Specifications
    • Electro-Voice RE20 Broadcast Announcer Microphone with Variable-D
      Transducer Dynamic
      Polar Pattern Cardioid
      Frequency Range 45 Hz to 18 kHz
      Load Impedance 150 ohms
      Sensitivity 1.5 mV/PA
      Output Connectors 3-Pin XLR
      General
      Length 8.54" (216.92 mm)
      Diameter 2.13" (54.10 mm)
      Weight 26 oz (737 g)
      Packaging Info
      Box Dimensions (LxWxH) 12.1 x 6.9 x 3.3"
    • dbx 286s - Microphone Preamp/Channel Strip
      Number of Channels Single
      Inputs 1 x XLR Microphone (p2 hot)
      1 x 1/4" TRS phone Line
      1 x 1/4" TRS phone Insert
      Outputs 1 x 1/4" TRS phone Insert
      Frequency Response 20Hz to 20kHz, +0.5/-0.5dB
      Noise <-80dBu unweighted (20Hz-20kHz); both gain controls set for 0dB, all processing controls OFF
      Preamp
      Gain Range 0dB to +60dB
      Maximum Output 0.25Vrms, Gain = 30dB
      Input Impedance ~4.2kΩ
      EIN -125dBu, 22Hz to 22kHz, 150Ω source impedance
      CMRR >40dB, typically 55dB
      Phantom Power +48VDC, applied to XLR pins 2 and 3 through 6.81kΩ resistors
      Line Input
      Impedance 10kΩ unbalanced, 20kΩ balanced
      Maximum Level >+21dBu, balanced or unbalanced
      Gain Range -15dB to +45 dB
      CMRR >40dB, typically 55dB
      Insert
      Impedance Ring: >5kΩ
      Tip: 100Ω
      Maximum Level >+21dBu, >+20dBm (600Ω load)
      Noise <-89dBu, unweighted (20Hz to 20kHz); Line Gain control set to 0dB
      Distortion <0.01% THD, 20Hz to 20kHz, +10dBu
      Line Output
      Impedance 100Ω unbalanced, 200Ω balanced
      Maximum Level >+21dBu, >+20dBm (600Ω load)
      Gain Range -30dB to +10dB
      Noise <-80dBu unweighted (20Hz-20kHz); both Gain Controls set for 0dB, all processing controls OFF
      Frequency Response 20Hz to 20kHz, +0.5/-0.5dB
      Distortion <0.08%THD, 20Hz to 20kHz, +10dBu, all processing controls OFF
      Compressor
      Threshold Range -40dBu to +20dBu
      Ratio >4:1 for input levels beyond 20dB above threshold
      Attack Time Program dependent: >1S for small level increases, down to 10mS for large increases
      Release Time Program dependent: adjustable between approximately 1dB/sec and 75dB/sec
      Slope OverEasy
      Sidechain No
      Distortion Typically <0.05%THD, 20Hz to 20kHz, 15dB gain reduction, +10dBu Output, Density @ 0
      SMPTE Intermodulation Distortion: <0.05%; 60Hz/7kHz 4:1, 15dB gain reduction, +10dBu Output Level, Density @ 0
      Equalizer
      Filter Type Not applicable
      Frequency Bands Not applicable
      Bandwidth Not applicable
      Range (Boost/Cut) Not applicable
      Light Indication
      Threshold Range Not applicable
      Ratio Not applicable
      Attack Time Not applicable
      De-Esser
      Characteristics Wideband Gain Reduction
      Frequency Range 800Hz to 10kHz High Pass, 12dB/octave
      Release Time Program dependent approximately 1mS/dB
      Enhancer
      HF Detail Program-controlled shelving equalizer, approximately 15dB maximum HF boost
      LF Detail Bell-shaped boost @ 80Hz, bell-shaped cut @250Hz, ratio is approximately 2:1
      Gate
      Gate Threshold OFF to +15dBu
      Expansion Ratio Adjustable 1.5:1 to 10:1
      Maximum Depth >50dB
      Attack Time Program dependent, approximately 2mS (at maximum attenuation)
      Release Time Program dependent, approxiamtely 10mS/dB
      Dynamic Range Typically 105dB
      Physical
      Power Requirements 120VAC 60Hz, 100VAC 50/60Hz
      15W consumption
      Operating Temperature 32°F to 113°F (0°C to 45°C)
      Dimensions (WxDxH) 19 x 5.75 x 1.75" (485 x 146 x 45mm)
      Weight 4.5 lb (2.04kg)
      Specialties Full compliment of meters and status LEDs
      Packaging Info
      Box Dimensions (LxWxH) 21.8 x 11.3 x 2.5"
    • Auray SSM-BC10 Microphone Suspension Shockmount (Black Matte)
      Material All-metal construction
      Dimensions (H x W x L) 10.0 x 6.5 x 5.0" (25.4 x 16.5 x 12.7 cm)
      Weight 1.1 lb (499 g)
      Packaging Info
      Box Dimensions (LxWxH) 9.9 x 6.7 x 6.6"
    • Auray BAI-2X Two-Section Broadcast Arm with Internal Springs and Integrated XLR Cable
      Length 40" (101.6 cm)
      Weight Capacity 5 lb (2.27 kg)
      Microphone Mount 5/8"-27 standard microphone thread
      Clamping Range 2.3" (5.8 cm)
      Riser 14" (35.56 cm)
      Cable XLR M to XLR F: 15' (457.2 cm)
      Weight 4.47 lb. (2.02 kg)
      Packaging Info
      Box Dimensions (LxWxH) 23.5 x 7.4 x 3.5"
    • Auray WCF-UB440 Foam Windscreen for Large Diaphragm Condenser Mics
      Packaging Info
      Box Dimensions (LxWxH) 5.0 x 3.7 x 2.8"
    The user manual for the Electro-Voice RE20 Microphone & dbx 286s Preamp Broadcaster can be downloaded in .pdf format if it did not come with your new broadcast/voice over, although the seller is required to supply one. It is also quite common that customers throw out the user manual with the box, or put the CD away somewhere and then can’t find it. That’s why we and other Electro-Voice users keep a unique electronic library for Electro-Voice broadcast/voice overs, where you can use our link to download the user manual for the Electro-Voice RE20 Microphone & dbx 286s Preamp Broadcaster.

    The user manual lists all of the functions of the Electro-Voice RE20 Microphone & dbx 286s Preamp Broadcaster, all the basic and advanced features and tells you how to use the broadcast/voice over. The manual also provides troubleshooting for common problems. Even greater detail is provided by the service manual, which is not typically shipped with the product, but which can often be downloaded from Electro-Voice service.

    If you want to help expand our database, you can upload a link to this website to download a user manual or service manual, ideally in .pdf format. These pages are created by you – users of the Electro-Voice RE20 Microphone & dbx 286s Preamp Broadcaster. User manuals are also available on the Electro-Voice website under Pro Audio - Location Sound - Broadcast/Voice Over.


    Discussion Question and answer discussion forum concerning user instructions and resolving problems with the Electro-Voice RE20 Microphone & dbx 286s Preamp Broadcaster - no comments have been made yet - be the first to add a comment

    Post new comment/question/response regarding the Electro-Voice RE20 Microphone & dbx 286s Preamp Broadcaster

    Fields marked with * must be filled out.
    Your name *:
    E-mail :
    Subject *:
    Message text *:
    Enter the code *:
    (spam block)    		 "manual"
    If you would like to receive a response to your comment, don’t forget to include your e-mail address. Your e-mail will not be displayed or otherwise used in any way.

     

    Can't find what you're looking for? Try Google Search!

    Current discussions
    Most recently discussed products:

    Jdjdu - Fujinon ESM-15A-SA Digital Servo Unit for Fujinon ESM-15A-SA
    Posted by: Jejd
    2024-09-17 15:20:50

    Jdjsj...
    Blue light won't turn off - Canon PIXMA MG3620 Wireless All-in-One Inkjet Printer 0515C022AA
    Posted by: Gail Joyan
    2024-09-10 20:06:39

    Why is the blue light (wireless symbol)...what is it on...its a blue light. I have had these for years and have never had that light come on and it is not allowing me to print! What do I do to turn it off? ...
    K&M manual - K&M 200 Telescoping Microphone Stand (Black) 20000-500-55
    Posted by: jpdaval69
    2024-09-10 00:50:11

    i m lookimg for K&M manual...
    SHOT TRAK - ATN Shot Trak HD High Definition Gun Camera with Red SOGCSHTR2
    Posted by: DRIFTDIVER
    2024-09-03 19:47:06

    NEED AN OPERATORS MANUAL...
    UA Solo/610 - Universal Audio SOLO/610 Microphone Preamplifier SOLO/610
    Posted by: Hani Michel
    2024-08-24 20:41:04

    I need the service manual/schematic of Universal Audio Solo/610 Serial number: 2310 MfgDt: 0607. I hope you have it and I'm willing to be charged for it. Best Regards....

    Uploaded instruction manuals
    Upload a link to an instruction manual for a depicted product here:

    Link format "http://www.link2manual.com/manual.pdf"

    Enter the code: "manual"




    PDF-MANUALS.com - Community administered database of instructions for use and PDF User manual
    sitemap.txt alx