|
User manual for EnGenius 802.11ac 3x3 Dual Band Ceiling-Mount EAP1750H-3PACK
- Manufacturer: EnGenius
- Basic description and contents of package
- Product classification: Computers & Solutions - Networking - Wireless Access Points
- Safety instructions
- Startup and operation of the wireless access points
- Tips for setting up your EnGenius
- Settings and expert assistance
- Contact EnGenius service
- Troubleshooting
- Warranty information
- Price: 622 USD
Click to enlarge image
|
We recommend checking out our discussion threads on the EnGenius 802.11ac 3x3 Dual Band Ceiling-Mount EAP1750H-3PACK,
which address similar problems with connecting and setting up Wireless Access Points EnGenius.
|
User manual for the EnGenius 802.11ac 3x3 Dual Band Ceiling-Mount EAP1750H-3PACK
The user manual for the EnGenius 802.11ac 3x3 Dual Band Ceiling-Mount EAP1750H-3PACK provides
necessary instructions for the proper use of the product Computers & Solutions - Networking - Wireless Access Points.
Extend the range of your current wireless network with the 802.11ac 3x3 Dual Band Ceiling-Mount Wireless Access Point / WDS from EnGenius. This manufacturer's kit contains three of these wireless access points, each of which comes equipped with one Gigabit Ethernet port, one reset button, and one power connector. Install these access points virtually anywhere, as they feature a reduced size smoke detector style form factor.
Integrated power over Ethernet technology eliminates the need to run a power source to the device, while dual band 2.4 GHz and 5 GHz frequency compatibility and IEEE 802.11a/b/g/n/ac network standards provide extensive network connectivity options. The dual band functionality ensures devices requiring more bandwidth can connect to the less congested 5 GHz frequency while multiple channels allow devices to utilize different paths for network access.
|
If you own a EnGenius wireless access points and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the EnGenius 802.11ac 3x3 Dual Band Ceiling-Mount EAP1750H-3PACK in the following formats:
- *.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
|
Additional parameters of the EnGenius 802.11ac 3x3 Dual Band Ceiling-Mount EAP1750H-3PACK:
| Frequency Bands | 2.4 and 5 GHz bands | | Standards | IEEE 802.11a/n/ac on 5 GHz
IEEE 802.11b/g/n on 2.4 GHz | | Radio | Radio 1
11b/g/n: 2.412~2.484 GHz
Radio II
11a/n/ac: 5.18-5.24 and 5.26-5.32 and 5.5-5.7 and 5.745-5.825 GHz | | Data Rate | Up to 1,300 Mb/s in 5 GHz
Up to 450 Mb/s in 2.4 GHz | | Memory | 128 MB | | Peak Power | Up to 22 W | | Antennas | Integrated 3D sectorized antenna array
4 dBi on 2.4 GHz
5 dBi on 5 GHz | | Ethernet Port | 1 x RJ-45 Gigabit Ethernet port (10/100/1000 Mb/s) | | Buttons | 1 x Reset button | | Power Connector | 1 x power connector | | LEDs | Power, WPS, 2.4 GHz, 5 GHz, LAN | | Power Supply | 90 to 240 VDC ñ 10%, 50/60 Hz | | Active Ethernet | Power-over-Ethernet, IEEE 802.3at | | Power Adapter | 12 V / 2 A | | OFDM | BPSK, QPSK, 26-OAM, 64-QAM, DBPSK, DQPSK, CCK | | Operating Channels | 2.4 GHz
US/Canada 1-11
5 GHz
Country dependent for the following ranges: 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140, 149, 153, 157, 161, 165 | | Topology | Infrastructure / Ad-Hoc | | Operating Modes | Access point, WDS bridge, WDS access point | | Multiple BSSID | Supports up to 8 BSSIDs per radio | | LAN | IP (check validity and DHCP server IP range) MAC | | SSID-to-VLAN Mapping | Supports 802.11q SSID-to-VLAN tagging | | Spanning Tree | Supports 802.1d spanning tree protocol | | Wireless Modes | 11a/11b/11g/11n/11ac | | Channel Selection | Channel selection (settings vary by country)
Channel bandwidth (Auto, 20 MHz, 40 MHz) | | Transmission Rate | 2.4 GHz
11n only, 11b/b/n mix, 11b only, 11b/g, 11g only
5 GHz
11n only, 11a/n mix, 11a only, 11ac only | | QoS | WMM (Wireless Multimedia) | | VPN | Pass-through (PPTP, L2TP, IPSec) | | WPS (Wi-Fi Protected Setup) | Software only | | Tx Power Control | Adjust transmit power by dBm | | Configuration | Web-based configuration (http) / Telnet | | Telnet Server | CLI | | Firmware Upgrade | Via web browser, settings are reserved after upgrade | | Administrator Setting | Administrator username and password change | | Reset Setting | Reboot (press 1 second)
Reset to factory default (press 10 seconds) | | System Monitoring | Status statistic and even log | | SNMP | V1, V2c, V3 | | MIB | MIB I, MIB II (RFC1213) and private MIB | | Traffic Shaping | Incoming and outgoing wireless traffic shaping | | Auto-Channel Selection | Automatically selecting least congested channel | | Bandwidth Measurement | IP range and bandwidth management | | Auto Reboot | reboot access point by minute, hour, day, or week | | Backup and Restore | Save and restore settings through Web interface | | CLI | Supports command line interface | | Diagnosis | IP pinging statistics | | Log | SysLog and local log support | | LED Control | On / off | | AP Detection | Scanning for available EnGenius APs | | Wireless / Network | PPTP
Point-to-Point Tunneling Protocol (PPTP) is a method for implementing virtual private networks | | Wireless Security | WPA/WPA2 Personal (WPA-PSK using TKIP or AES)
WPA/WPA2 Enterprise (WPA-EAP using TKIP)
802.1X RADIUS Authenticator: MD5/TLS/TTLS, PEAP
SSID broadcast enable/disable
MAC Address Filtering, Up to 50 fields
Wireless STA (Client) connected list (Idle/Connection Time, Pkt statistics) | | Quality of Service (QoS) | WMM (wireless multimedia) | | Operating Temperature | 32 to 104°F / 0 to 40°C | | Storage Temperature | -4 to 140°F / -20 to 60°C | | Operating Humidity | 90% or less (non-condensing) | | Storage Humidity | 90% or less (non-condensing) | | Certifications | FCC, IC | | Dimensions | 6.36 x 1.64" / 16.15 x 4.17 cm | | Weight | 0.62 lb / 0.28 kg | | Package Weight | 5.85 lb | | Box Dimensions (LxWxH) | 11.89 x 9.528 x 9.213" | |
The user manual for the EnGenius 802.11ac 3x3 Dual Band Ceiling-Mount EAP1750H-3PACK can be downloaded in .pdf
format if it did not come with your new wireless access points, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other EnGenius users keep a unique electronic library
for EnGenius wireless access pointss,
where you can use our link to download the user manual for the EnGenius 802.11ac 3x3 Dual Band Ceiling-Mount EAP1750H-3PACK.
The user manual lists all of the functions of the EnGenius 802.11ac 3x3 Dual Band Ceiling-Mount EAP1750H-3PACK,
all the basic and advanced features and tells you how to use the wireless access points.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from EnGenius service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the EnGenius 802.11ac 3x3 Dual Band Ceiling-Mount EAP1750H-3PACK. User manuals are also
available on the EnGenius website under Computers & Solutions - Networking - Wireless Access Points.
Question and answer discussion forum concerning user instructions and resolving problems with the EnGenius 802.11ac 3x3 Dual Band Ceiling-Mount EAP1750H-3PACK - no comments have been made yet - be the first to add a comment
Post new comment/question/response regarding the EnGenius 802.11ac 3x3 Dual Band Ceiling-Mount EAP1750H-3PACK
|
|
|
|
|
