User manual Focusrite RedNet 3 - Dante Equipped 32-Channel Digital REDNET 3
Operating instructions and pdf manual for use - Focusrite RedNet 3 - Dante Equipped 32-Channel Digital REDNET 3 User manual, User manual Focusrite RedNet 3 - Dante Equipped 32-Channel Digital REDNET 3, Focusrite, RedNet, 3, Dante, Equipped, 32-Chan
User manual for Focusrite RedNet 3 - Dante Equipped 32-Channel Digital REDNET 3
Manufacturer: Focusrite
Basic description and contents of package
Product classification: Pro Audio - Computer Audio - Audio Interfaces & Systems
Safety instructions
Startup and operation of the audio interfaces & systems
Tips for setting up your Focusrite
Settings and expert assistance
Contact Focusrite service
Troubleshooting
Warranty information
Price: 1000 USD
We recommend checking out our discussion threads on the Focusrite RedNet 3 - Dante Equipped 32-Channel Digital REDNET 3,
which address similar problems with connecting and setting up Audio Interfaces & Systems Focusrite.
User manual for the Focusrite RedNet 3 - Dante Equipped 32-Channel Digital REDNET 3
The user manual for the Focusrite RedNet 3 - Dante Equipped 32-Channel Digital REDNET 3 provides
necessary instructions for the proper use of the product Pro Audio - Computer Audio - Audio Interfaces & Systems.
RedNet 3 from Focusrite is a remote controlled, thirty-two channel input/output ADAT digital audio interface that uses the Dante networking system to transfer studio quality sound between any modern audio application. The sixteen ADAT optical ports support thirty-two digital channels in and out, even at 96 kHz using S-MUX2. The unit also includes support for eight channels of AES/EBU and two channels of S/PDIF digital audio I/O and allows the RedNet system to be synchronized to incoming signal clock or a Wordclock source .
The RedNet system was designed for use in multiple audio applications, from live sound rigs to multi-room recording studios, houses of worship, audio distribution installations, post production environments and anything in-between. RedNet 3 can be used simply as a means of converting thirty-two channels of digital audio between formats and delivering it somewhere else on the network at near-zero latency. Sample rate conversion is available on the AES and S/PIDF inputs.
There are three methods of connecting the unit to a computer using a single Ethernet cable. These are via an optional RedNet PCIe card (for ASIO and Core Audio applications), directly into the computer's Ethernet port using DVS (Dante Virtual Soundcard) software where near zero latency is not essential, or through an existing RedNet 5 interface for connecting directly to Pro Tools HD, Pro Tools HDX and Pro Tools HD Native.
If you own a Focusrite audio interfaces & systems and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the Focusrite RedNet 3 - Dante Equipped 32-Channel Digital REDNET 3 in the following formats:
*.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
Additional parameters of the Focusrite RedNet 3 - Dante Equipped 32-Channel Digital REDNET 3:
Specifications
Inputs
AES/EBU: 1 x 25-pin D-Sub for 8 channels, wired to AES 59, with switchable SRC (combined I/O) ADAT: 8 x TOSLink Lightpipe for 32 channels @ 44.1, 48, 88.2 and 96 kHz sample rate, 16 channels @ 192 kHz S/PDIF: 1 x RCA coaxial for 2 channels, with switchable SRC 44.1 to 192 kHz
Sample Rate Converter
AES/EBU Input Input Sample Rate Range: 32 to 216 kHz Gain Error: -0.3 dB Dynamic Range: >138 dB (-60 dBFS method) THD+N: <-130 dB (0.00003%), 0 dBFS input
Outputs
AES/EBU: 1 x 25-pin D-Sub for 8 channels, sync-locked to RedNet system sample rate (combined I/O) ADAT: 8 x TOSLink Lightpipe for 32 channels @ 44.1, 48, 88.2 and 96 kHz sample rate, 16 channels @ 192 kHz S/PDIF: 1 x RCA coaxial for 2 channels, sync-locked to RedNet system sample rate
Operating Modes
AES/EBU Mode: AES/EBU Inputs - channels 1 to 8; ADAT Inputs - channels 9 to 32; AES/EBU Outputs - channels 1 to 8; ADAT Outputs - channels 1 to 32 ADAT Mode: ADAT Inputs - channels 1 to 32; AES/EBU Outputs - channels 1 to 8; ADAT Outputs - channels 1 to 32
Digital Performance
Supported Sample Rates: 44.1, 48, 88.2, 96 and 192 kHz Clock Sources: Local or from network master device Local Clock Sources: Internal, Wordclock input, AES input 1, ADAT input 1, S/PDIF input External Wordclock Range: Sample rate +/-7.5%
The user manual for the Focusrite RedNet 3 - Dante Equipped 32-Channel Digital REDNET 3 can be downloaded in .pdf
format if it did not come with your new audio interfaces & systems, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other Focusrite users keep a unique electronic library
for Focusrite audio interfaces & systemss,
where you can use our link to download the user manual for the Focusrite RedNet 3 - Dante Equipped 32-Channel Digital REDNET 3.
The user manual lists all of the functions of the Focusrite RedNet 3 - Dante Equipped 32-Channel Digital REDNET 3,
all the basic and advanced features and tells you how to use the audio interfaces & systems.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from Focusrite service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the Focusrite RedNet 3 - Dante Equipped 32-Channel Digital REDNET 3. User manuals are also
available on the Focusrite website under Pro Audio - Computer Audio - Audio Interfaces & Systems.
Question and answer discussion forum concerning user instructions and resolving problems with the Focusrite RedNet 3 - Dante Equipped 32-Channel Digital REDNET 3 - no comments have been made yet - be the first to add a comment
Why is the blue light (wireless symbol)...what is it on...its a blue light. I have had these for years and have never had that light come on and it is not allowing me to print! What do I do to turn it off? ...K&M manual - K&M 200 Telescoping Microphone Stand (Black) 20000-500-55 Posted by: jpdaval69 2024-09-10 00:50:11
I need the service manual/schematic of Universal Audio Solo/610 Serial number: 2310 MfgDt: 0607.
I hope you have it and I'm willing to be charged for it.
Best Regards....True Dock not recognizing hard drives - Kingwin True Dock Super-Speed USB 3.0 to TD-2535U3 Posted by: bf1955 2024-08-22 15:34:26
True Dock is not recognizing HDD, the HDD light does not come on, even though the power light does come one....