User manual For.A MV-410HS HD/SD High Resolution Quad Viewer MV-410HS
Operating instructions and pdf manual for use - For.A MV-410HS HD/SD High Resolution Quad Viewer MV-410HS User manual, User manual For.A MV-410HS HD/SD High Resolution Quad Viewer MV-410HS, For.A, MV-410HS, HD/SD, High, Resolution, Quad, Viewer, MV
User manual for For.A MV-410HS HD/SD High Resolution Quad Viewer MV-410HS
Basic description and contents of package
Product classification: A/V Presentation - Signal Processing & Distribution - Multi Viewer Processors
Startup and operation of the multi viewer processors
Tips for setting up your For.A
Settings and expert assistance
Contact For.A service
We recommend checking out our discussion threads on the For.A MV-410HS HD/SD High Resolution Quad Viewer MV-410HS,
which address similar problems with connecting and setting up Multi Viewer Processors For.A.
User manual for the For.A MV-410HS HD/SD High Resolution Quad Viewer MV-410HS
The user manual for the For.A MV-410HS HD/SD High Resolution Quad Viewer MV-410HS provides
necessary instructions for the proper use of the product A/V Presentation - Signal Processing & Distribution - Multi Viewer Processors.
The MV-410HS HD/SD High Resolution Quad Viewer from For.A is a 4-channel multi viewer that supports mixed input of HD-SDI, SD-SDI, and analog composite signals. High-resolution video output is possible using its DVI terminal. Support is also provided for user-created patterns and video transfer over a LAN connection. A separately available redundant power supply may be added to ensure uninterrupted operation.
If you own a For.A multi viewer processors and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the For.A MV-410HS HD/SD High Resolution Quad Viewer MV-410HS in the following formats:
*.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
Additional parameters of the For.A MV-410HS HD/SD High Resolution Quad Viewer MV-410HS:
Video Input: 4 inputs from any of the signals below (mixed input and asynchronous input are possible) HD-SDI: 1.485Gbps or 1.485/1.001Gbps, 75 Ohms, BNC SD-SDI: 270 Mbps, 75 Ohms, BNC Analog composite: 1.0 Vp-p, 75 Ohms, BNC LTC Input: 1 input, SMPTE time code approximately 1.0Vp-p within +/-6dB
Video Output: DVI output (outputs digital and analog outputs at the same time) DVI-I connector, 1 output Resolution: 1920 x 1200, 1600 x 1200, 1280 x 1024, 1360 x 768, 1440 x 900, 1680 x 1050, 1920 x 1080, 1280 x 720 *No input/output frame rate converter. Frame rate difference between input and output results the repeat frame or drop frame. Active loop through output (for a monitor): HD-SDI: 1.485Gbps or 1.485/1.001Gbps SD-SDI: 270Mbps 75Ω, BNC *Available only when input is either HD-SDI or SD-SDI. *No jitter correction. The jitter in the input will be carried to the active loop through output. The total jitter may exceed the jitter limit of signal standard.
Quantization: 8-bit I/O Delay 1 to 2 frames Split-Screen Patterns: Full screen, user-selected screen Character Display: Display characters: Maximum of 16 characters x 1 line per input channel Character types: Alphanumeric, symbols Tally Display: Displayed in each input screen frame (red or green) Audio Level Display: Displayed in each input screen frame, 8 channels of embedded audio signals Time Display: Enables display of the current time (Internal clock or LTC selectable) *Accuracy within +/-10 seconds per month (at 25 degrees C)
RS-232C/RS-422: D-sub 9-pin (male), 1 line Transmission rate: 9600/19200/38400 bps, data length: 8 bits, stop bit: 1 bit, parity: ONE/ODD/EVEN TALLY IN: D-sub 25-pin (female) *Shared with REMOTE IN 4 inputs x 2 colors (red or green color frame display) TTL negative logic level signal or make-contact input REMOTE IN: D-sub 25-pin (female) *Shared with TALLY IN Switching between full screen and split-screen display TTL negative logic level signal or make-contact input LAN: 10Base-T/100Base-TX, RJ-45 (CAT5 support), 1 line Video transfer: DVI/analog RGB output and transfer of the same screen with size reduction, JPEG compression
100 to 240VAC +/-10%, 50Hz/60Hz / 60VA (57W) (at 100V)
1.73 x 16.93 x 15.74" (44 x 430 x 400mm)
12.13 lbs (5.5kg) *Weight with redundant power supply installed
The user manual for the For.A MV-410HS HD/SD High Resolution Quad Viewer MV-410HS can be downloaded in .pdf
format if it did not come with your new multi viewer processors, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other For.A users keep a unique electronic library
for For.A multi viewer processorss,
where you can use our link to download the user manual for the For.A MV-410HS HD/SD High Resolution Quad Viewer MV-410HS.
The user manual lists all of the functions of the For.A MV-410HS HD/SD High Resolution Quad Viewer MV-410HS,
all the basic and advanced features and tells you how to use the multi viewer processors.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from For.A service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the For.A MV-410HS HD/SD High Resolution Quad Viewer MV-410HS. User manuals are also
available on the For.A website under A/V Presentation - Signal Processing & Distribution - Multi Viewer Processors.
Question and answer discussion forum concerning user instructions and resolving problems with the For.A MV-410HS HD/SD High Resolution Quad Viewer MV-410HS - no comments have been made yet - be the first to add a comment
Hello... I am trying to find a download for the manual for the Polaroid Photo Studio Light Tent Kit. It was not included in the box. (Grrr!!!) Thank you in advance....MANUAL CCFN-50 - Sony Hybrid Optical Fiber Cable (164') CCFN-50 Posted by: JOSE ORLANDO MORALES 2018-04-26 23:25:00
I was going to buy one of these till I discovered you can only use passive foldback speakers.
This makes it almost useless as most foldback speakers, like my Behringer 10" are active.
The other PMP series have a passive monitor output, and Behring...