|
User manual for Genelec 1237A Tri-Amplified SAM Monitor System 1237APM
- Manufacturer: Genelec
- Basic description and contents of package
- Product classification: Pro Audio - Recording - Studio Monitors
- Safety instructions
- Startup and operation of the studio monitors
- Tips for setting up your Genelec
- Settings and expert assistance
- Contact Genelec service
- Troubleshooting
- Warranty information
|
We recommend checking out our discussion threads on the Genelec 1237A Tri-Amplified SAM Monitor System 1237APM,
which address similar problems with connecting and setting up Studio Monitors Genelec.
|
User manual for the Genelec 1237A Tri-Amplified SAM Monitor System 1237APM
The user manual for the Genelec 1237A Tri-Amplified SAM Monitor System 1237APM provides
necessary instructions for the proper use of the product Pro Audio - Recording - Studio Monitors.
The Genelec 1237A Tri-Amplified SAM Monitor System comes from the company's 35+ years of designing and building professional three-way monitors for recording studios, post-production houses, digital mastering facilities, radio, and TV broadcasting companies. The monitor uses a 500-watt powered 12" low frequency woofer, a 250-watt powered mid-frequency woofer that is handmade in Finland, and a 200-watt powered 1" metal dome high frequency tweeter in a proprietary large Directivity Control Waveguide (DCW) to deliver a frequency response of 32 to 22,000 Hz (-6 dB). The waveguide helps maintain balanced on- and off-axis imaging for even the most acoustically challenging environments.
Power is supplied by the 3U removable and rackmountable RAM-L amplifier module that uses a Class D amplifier design for the low and mid frequencies combined with a Class AB design for the treble. The amplifier module supports rapid system configuration as well the automatic room response calibration for fast and accurate monitor installations. The monitor is also equipped with the company's Genelec Loudspeaker Manager Control Network Technologies for integrating multiple monitors together to build stereo and surround systems.
For I/O the monitor features both an analog XLR input with a 10 kΩ impedance as well as an AES/EBU XLR digital input. It also includes an AES/EBU XLR digital Thru/Output for connecting to additional monitors using the Genelec Loudspeaker Manager Control Network technology (GLM) with four low frequency notch filters, two high frequency notch filters, two low frequency shelving filters, and two high frequency shelving filters. The monitor can be positioned either vertically or horizontally on its side by rotating the mid/high unit 90°.
|
If you own a Genelec studio monitors and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the Genelec 1237A Tri-Amplified SAM Monitor System 1237APM in the following formats:
- *.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
|
Additional parameters of the Genelec 1237A Tri-Amplified SAM Monitor System 1237APM:
| I/O | Analog Input: XLR
Digital Input: AES/EBU XLR single wire or dual wire
Digital Output/Thru: AES/EBU output XLR single wire or dual wire
Control Network: 2x RJ45 CAT5 cables (Proprietary GLM network)
Amp module external: 2x Speakon (when separate from monitor) | | Word Length | 16 to 24 bits | | Sample Rate | 32 to 192 kHz | | Input Sensitivity | Digital (100 dB SPL at 1 m): -30 dBFs | | Input Gain Adjustment | Digital: 0, +6, +12, +18 dB | | Crossover Frequency | Bass/Mid: 450 Hz
Mid/Treble: 3,000 Hz | | Filters | Notch Filters: 4 LF and 2 HF
Shelving Filters: 2 LF and 2 HF | | Calibration | Genelec GLM AutoCal | | Analog Input Impedance | 10 kΩ | | Drivers | 12" low frequency woofer
5" Finnish made midrange frequency woofer
1" metal dome high frequency tweeter with Directivity Control Waveguide (DCW) | | Amplification | LF: 500 W of Class D amplification
MF: 250 W of Class D amplification
HF: 200 W of Class AB amplification | | THD | Amplifier at Nominal Output: <0.01% | | SNR | Bass: > 115 dB
Midrange: > 115 dB
Treble: > 115 dB | | Low Cut Frequency | < 35 Hz | | High Cut Filter | > 21,000 Hz | | Frequency Response | 32 to 22,000 Hz (-6 dB)
Free Field: 37 to 20,000 Hz (±2.5 dB) | | SPL | Short Term Sine Wave On Axis from 100 to 3,000 Hz at 1 m: > 118 dB
Long Term RMS At Same Conditions: > 112 dB | | Max Peak SPL | Per Pair In Listening Room With Music Material At 2 m: >122 dB | | Self Noise | < 10 dB | | Harmonic Distortion | At 95 dB SPL at 1 m on axis
50 to 200 Hz: < 3%
Over 200 Hz: <0.5% | | Mains Voltage | 100 to 240 VAC, 50/60 Hz | | Power Consumption | Standby: < 0.5 W
Idle: 25 W
Full output: 750 W | | Dimensions (H x W x D) | Monitor: 26.75 x 15.75 x 15.00" (680.0 x 400.0 x 380 mm)
Amplifier (front panel): 5.19 x 19.0 x 9.92" (132 x 483 x 252 mm)
Amplifier (casing): 3.15 x 16.7 x 9.92" (80 x 425 x 252 mm) | | Weight | With Integrated Amplifier: 93 lb (42 kg)
Without Integrated Amplifier: 80 lb (36 kg)
Amplifier: 13 lb (6.0 kg) | |
The user manual for the Genelec 1237A Tri-Amplified SAM Monitor System 1237APM can be downloaded in .pdf
format if it did not come with your new studio monitors, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other Genelec users keep a unique electronic library
for Genelec studio monitorss,
where you can use our link to download the user manual for the Genelec 1237A Tri-Amplified SAM Monitor System 1237APM.
The user manual lists all of the functions of the Genelec 1237A Tri-Amplified SAM Monitor System 1237APM,
all the basic and advanced features and tells you how to use the studio monitors.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from Genelec service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the Genelec 1237A Tri-Amplified SAM Monitor System 1237APM. User manuals are also
available on the Genelec website under Pro Audio - Recording - Studio Monitors.
Question and answer discussion forum concerning user instructions and resolving problems with the Genelec 1237A Tri-Amplified SAM Monitor System 1237APM - no comments have been made yet - be the first to add a comment
Post new comment/question/response regarding the Genelec 1237A Tri-Amplified SAM Monitor System 1237APM
|
|
|
|
|
