|
User manual for Honeywell equIP H4W1F1 Indoor/Outdoor Minidome IP Camera H4W1F1
- Manufacturer: Honeywell
- Basic description and contents of package
- Product classification: Surveillance - Surveillance Video - Wired IP Cameras
- Safety instructions
- Startup and operation of the wired ip cameras
- Tips for setting up your Honeywell
- Settings and expert assistance
- Contact Honeywell service
- Troubleshooting
- Warranty information
- Price: 633 USD
|
We recommend checking out our discussion threads on the Honeywell equIP H4W1F1 Indoor/Outdoor Minidome IP Camera H4W1F1,
which address similar problems with connecting and setting up Wired IP Cameras Honeywell.
|
User manual for the Honeywell equIP H4W1F1 Indoor/Outdoor Minidome IP Camera H4W1F1
The user manual for the Honeywell equIP H4W1F1 Indoor/Outdoor Minidome IP Camera H4W1F1 provides
necessary instructions for the proper use of the product Surveillance - Surveillance Video - Wired IP Cameras.
The light gray powder-coated Honeywell equIP H4W1F1 Indoor/Outdoor Minidome IP Camera is equipped with a 3.3 to 12mm VFAI lens and features a light gray, powder-coated finish. It is a high-definition, wide dynamic, true day/night rugged indoor/outdoor fixed minidome network camera. This compact and vandal-resistant camera provides crisp images at minimal bandwidth. The minidome IP camera provides 720p resolution at full frame rate. It features progressive scan technology and 2D edge enhancement to provide high clarity and definition. DNR (Digital Noise Reduction) results in significant storage savings without sacrificing image quality in low light. The 1/3" progressive scan CMOS sensor offers digital video surveillance technology with accurate color rendition through a wide variety of lighting conditions. It also supports the ONVIF specification for interoperability between network video products. The camera and lens are integrated in a compact, single piece, tamper-proof unit for fast and easy installation in any application. The camera comes complete with surface and flush mounting options. Wall and pendant mount kits are also available (sold separately). In addition to the low-light color performance, the camera can automatically switch to B&W. In this mode, lighting can be complemented with infrared for discreet/covert low-light surveillance with enhanced monochrome images. In high contrast lighting conditions, the H3W1F1 camera delivers high quality images and dynamic range (>100 dB). Designed for environments with difficult lighting, this H3W1F camera offers a solution to capture the whole picture regardless of lighting condition or application. A 3D axis gimbal capable of 360° pan, 180° tilt, and 360° of horizontal rotation, simplifies mechanical camera adjustment. The VFAI (varifocal auto iris) lens allows the field of view to be adjusted for suiting scene requirements. A powerful and intuitive web client allows fine tuning of the camera and the auto iris levels. This can also be performed from most NVR setup utilities. This camera supports dual video streams and multiple compression formats with frame rates up to 30 fps. The compression parameters for the 2 video streams are independently configurable. The primary stream is dedicated to H.264. The secondary stream can be configured for H.264 or MJPEG. This camera features analog video out for aiming and focusing during setup. With built-in low current Power over Ethernet (PoE, IEEE 802.3af), power is supplied to the camera using standard network cabling, thereby eliminating the need for a separate power supply and associated wiring. In situations where PoE support is not available, the unit can also be powered directly from a 24VAC power supply. This network camera uses Honeywell technology for video motion detection, tamper detection, remote firmware updating, and for secure storage of all camera settings. Video motion detection recognizes object motion within the field of view; then a simple, on-screen notification alerts the user. Camera tamper detection notifies the user when a camera’s field of view is altered, blinded, or blurred. This ensures the video’s integrity and alerts the customer to either a live event or a system problem that is causing disruption to the video stream. This technology also allows users to remotely upload firmware to the camera. Setup is quick and easy, and can be customized through a web client or from an NVR (sold separately). The built-in Web server provides password-protected access to the camera’s video and network setup. The H4W1F1 Indoor/Outdoor Minidome IP Camera is suitable for installations where good picture clarity at minimal bandwidth is required. This camera can be retrofitted on many existing DVR/NVR installations without requiring additional storage. Its discreet, vandal-resistant, outdoor design provides maximum protection against dust, dirt, and water and provides optimum performance for both indoor and outdoor applications.
|
If you own a Honeywell wired ip cameras and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the Honeywell equIP H4W1F1 Indoor/Outdoor Minidome IP Camera H4W1F1 in the following formats:
- *.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
|
Additional parameters of the Honeywell equIP H4W1F1 Indoor/Outdoor Minidome IP Camera H4W1F1:
Video Standard | NTSC | Scanning System | Progressive scan | Image Sensor | 1/3" CMOS | Number of Pixels | H x V: 1280 x 720 | Minimum Illumination | 0.14 lux color/0.1 lux B&W @ 50 IRE, F1.6 | Lens Control | Automatic: DC iris level 1 to 25 | Video Output | 1 Vpp @ 75 Ω (AUX) | Dynamic Range | 115 dB | S/N Ratio | 50 dB or more (AGC off) | AGC (Automatic Gain Control) | Off/On, selectable (20 to 40 dB) | Electronic Shutter | Automatic: 1/30 to 1/87,000 sec | Lens Type | TDN (True Day/Night) 3.3 to 12 mm varifocal auto iris, F1.6 | Angle of View | Horizontal (Wide x Tele): 104.9 x 26.8° Vertical (Wide x Tele): 52.5 x 15.1° | White Balance | Auto, Manual, WBC Push | Audio | Two-Way: Line in/out | Input Voltage | 24 VAC, PoE IEEE 802.3af | Input Range | 17 to 28 VAC | Electrical | Surge Suppression: 1.5 kW transient | Power Consumption | 3.5 W (maximum) 24 VAC PoE: PD Type 1 Class 2 | Integration | Open IP: ONVIF support and open API for software integration | Video Compression | Dual stream H.264 and MJPEG | Resolution | Primary Stream 1280 x 720 Typical 2.7 Mb/s H.264 bit rate, 30 fps, 28.48 GB storage/day
800 x 450 Typical 1.8 Mb/s H.264 bit rate, 30 fps, 18.98 GB storage/day
640 x 360 Typical 0.9 Mb/s H.264 bit rate, 30 fps, 9.49 GB storage/day
320 x 180 Typical 0.315 Mb/s H.264 bit rate, 30 fps, 3.32 GB storage/day | Frame Rate | Up to 30 fps video in all resolutions | Video Streaming | Dual streaming: H.264 and MJPEG Controllable frame rate and bandwidth Constant or variable bit rate | Security | Multiple user access levels with password protection | Video Access From Web Browser | Full control of all camera settings available to administrator | Requirements | Minimum Web Browsing Minimum Web Browsing Pentium IV CPU 3.1 GHz or faster 1 GB RAM (32-bit) or 2 GB RAM (64-bit) Windows XP SP3, 2003 Server R2 (32-bit), 7 (32-/64-bit), Vista SP1, and 2008 R2 (64-bit), Internet Explorer 8 or 9, Mozilla Firefox, and Google Chrome | Maintenance | Installation and Management: Honeywell IP Utility software identifies the IP address, checks status of device, firmware upgrades over HTTP | Supported Protocols | HTTP, TCP, RTSP, RTP, UDP, ARP, DNS, NTP, RTCP, FTP, ICMP, DHCP, Bonjour, IGMP, SSH | Standard | ONVIF support | Construction | Housing: Die cast aluminum Finish: Light gray powder coat Dome: Polycarbonate | Connector | Video Output: 2-pin Molex connector Power Input: Removable screw block Network: RJ-45 connector Alarm I/O: Removable screw block Audio In: Removable screw block Audio Out: Removable screw block | Rating | IP66 | Temperature | Operating: -4 to 122°F (-20 to 50°C) Storage: -40 to 158°F (-40 to 70°C) | Relative Humidity | 0 to 85%, non-condensing | Dimensions (W x H) | 6.10 x 4.60" x (154.90 x 116.84 mm) | Weight | Camera Only: 2.86 lb (1.30 kg) | |
The user manual for the Honeywell equIP H4W1F1 Indoor/Outdoor Minidome IP Camera H4W1F1 can be downloaded in .pdf
format if it did not come with your new wired ip cameras, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other Honeywell users keep a unique electronic library
for Honeywell wired ip camerass,
where you can use our link to download the user manual for the Honeywell equIP H4W1F1 Indoor/Outdoor Minidome IP Camera H4W1F1.
The user manual lists all of the functions of the Honeywell equIP H4W1F1 Indoor/Outdoor Minidome IP Camera H4W1F1,
all the basic and advanced features and tells you how to use the wired ip cameras.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from Honeywell service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the Honeywell equIP H4W1F1 Indoor/Outdoor Minidome IP Camera H4W1F1. User manuals are also
available on the Honeywell website under Surveillance - Surveillance Video - Wired IP Cameras.
Question and answer discussion forum concerning user instructions and resolving problems with the Honeywell equIP H4W1F1 Indoor/Outdoor Minidome IP Camera H4W1F1 - no comments have been made yet - be the first to add a comment
Post new comment/question/response regarding the Honeywell equIP H4W1F1 Indoor/Outdoor Minidome IP Camera H4W1F1
|
|
|
|
|