User manual Honeywell equIP HBD2FR1 Indoor/Outdoor IR Bullet IP HBD2FR1
Operating instructions and pdf manual for use - Honeywell equIP HBD2FR1 Indoor/Outdoor IR Bullet IP HBD2FR1 User manual, User manual Honeywell equIP HBD2FR1 Indoor/Outdoor IR Bullet IP HBD2FR1, Honeywell, equIP, HBD2FR1, Indoor/Outdoor, IR, Bullet,
User manual for Honeywell equIP HBD2FR1 Indoor/Outdoor IR Bullet IP HBD2FR1
Manufacturer: Honeywell
Basic description and contents of package
Product classification: Surveillance - Surveillance Video - Wired IP Cameras
Safety instructions
Startup and operation of the wired ip cameras
Tips for setting up your Honeywell
Settings and expert assistance
Contact Honeywell service
Troubleshooting
Warranty information
Price: 827 USD
We recommend checking out our discussion threads on the Honeywell equIP HBD2FR1 Indoor/Outdoor IR Bullet IP HBD2FR1,
which address similar problems with connecting and setting up Wired IP Cameras Honeywell.
User manual for the Honeywell equIP HBD2FR1 Indoor/Outdoor IR Bullet IP HBD2FR1
The user manual for the Honeywell equIP HBD2FR1 Indoor/Outdoor IR Bullet IP HBD2FR1 provides
necessary instructions for the proper use of the product Surveillance - Surveillance Video - Wired IP Cameras.
The gray powder-coated Honeywell equIP HBD2FR1 Indoor/Outdoor IR Bullet IP Camera is equipped with a 3-9mm VFAI MFZ lens. This camera offers 1080p resolution at full frame rate, progressive scan technology, and edge enhancement for high picture clarity and definition. DNR (Digital Noise Reduction) provides significant storage savings without sacrificing image quality in low light and the 1/2.7” CMOS progressive scan imager ensures accurate color rendition through a wide variety of lighting conditions.
The HBD2FR1 Indoor/Outdoor IR Bullet IP Camera supports dual video streams (H.264 and H.264/MJPEG) and multiple compression formats with rates up to 30 fps. The digital compression parameters for the 2 video streams are independently configurable. A third analog stream is available for backup, local viewing, or for retrofitting the camera onto an existing analog input DVR or encoder.
The camera and lens are integrated in a compact, single-piece, vandal-resistant unit for fast and easy installation to a wall, ceiling, or 4S electrical box (sold separately). Built-in PoE (Power over Ethernet) lets you supply power to the camera using standard network cabling, thereby eliminating the need for a separate power supply and associated wiring.
A multidirectional bracket simplifies camera positioning and the MFZ (Motorized Focus and Zoom) lens with joystick control offers remote or local zoom and focus adjustment. This camera has a rugged housing that includes an adjustable sunshield and a built-in breather vent to prevent condensation buildup. This camera conforms to the ONVIF (Profile S) specification for interoperability between the network video products and comes with a powerful and intuitive Web client for fine-tuning camera settings.
This network camera uses Honeywell technology for video motion detection, tamper detection, remote firmware updating, and secure storage of all camera settings. Video motion detection recognizes object motion within the field of view after which a simple on-screen notification alerts the user. Camera tamper detection notifies the user when a camera’s field of view is altered, blinded, or blurred. This ensures the video’s integrity and alerts the customer to either a live event or a system problem that is causing disruption to the video stream. This technology also allows users to remotely upload firmware to the camera. Setup is quick and easy, and can be customized through a local joystick or Web client, or from an NVR/DVR. The built-in Web server provides password-protected access to the camera’s video and network setup.
This camera is suitable for installations that require high picture clarity at minimal bandwidth. This camera can be retrofitted on many existing DVR/NVR installations without requiring additional storage. Equipped with a rugged vandal and weather-resistant housing, this camera is suitable for both indoor and outdoor applications.
If you own a Honeywell wired ip cameras and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the Honeywell equIP HBD2FR1 Indoor/Outdoor IR Bullet IP HBD2FR1 in the following formats:
*.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
Additional parameters of the Honeywell equIP HBD2FR1 Indoor/Outdoor IR Bullet IP HBD2FR1:
Video Standard
NTSC
Scanning System
Progressive scan
Image Sensor
1/2.7" CMOS
Number of Pixels
H x V: 1920 × 1080 (1080p)
Minimum Illumination
0.25 lux color/0.22 lux B&W @ 50 IRE, F1.2 0.11 lux color/0.09 lux B&W @ 30 IRE, F1.2 0 lux with IR LEDs On
Lens Control
Automatic: DC iris level 1 to 25
Video Output
1 Vpp @ 75 Ω (AUX)
Dynamic Range
115 dB
S/N Ratio
50 dB or more (AGC off)
AGC (Automatic Gain Control)
Off/On, selectable (10 to 40 dB)
Electronic Shutter
Automatic: 1/30 to 1/130,000 sec
Lens Type
3 to 9 mm VFAI, MFZ, F1.2
IR LED
850 nm, 48 LEDs
Illumination Distance
IR: Up to 100' (30 m), depending on scene reflectance
White Balance
AWC, AWC Push, Manual
Audio
Two-Way: Line input
Input Voltage
PoE IEEE 802.3af, Class 3
Power Consumption
PD Type 1, Class 3
Integration
Open IP: ONVIF support and open API for real interoperability between Honeywell and other manufacturers' IP-enabled security devices
Refer to Honeywell Open Technology Alliance for more information
Video Compression
Dual stream H.264 and/or H.264/MJPEG
Resolution
Primary Stream 1920 x 1080 Typical 3 Mb/s H.264 bit rate, 30 fps, 31.64 GB storage/day
1280 x 720 Typical 1.4 Mb/s H.264 bit rate, 30 fps, 14.77 GB storage/day
800 x 450 Typical 0.75 Mb/s H.264 bit rate, 30 fps, 7.91 GB storage/day
640 x 360 Typical 0.4 Mb/s H.264 bit rate, 30 fps, 4.22 GB storage/day
320 x 180 Typical 0.2 Mb/s H.264 bit rate, 30 fps, 2.11 GB storage/day
Frame Rate
Up to 30 fps video in all resolutions
Video Streaming
Dual streaming: H.264 and MJPEG Controllable frame rate and bandwidth Constant or variable bit rate
Security
Multiple user access levels with password protection
Video Access From Web Browser
Full control of all camera settings available to administrator
System Requirements
Pentium 4 CPU 3.1 GHz or faster, 1 GB RAM (32-bit) or 2 GB RAM (64-bit), Windows 7 (32/64-bit), Server 2008 R2 (64-bit), Vista SP1, Server 2003 R2 (32-bit), or XP Professional SP3, Internet Explorer 8 or 9, Google Chrome, or Mozilla Firefox
Maintenance
Installation and Management: Honeywell IP Utility software identifies IP address, checks status of device, upgrades firmware over HTTP
Video Output (AUX): 2-pin connector Power Input: RJ-45 connector Alarm I/O: 8-pin connector Audio I/O: 8-pin connector
Rating
IP66
Temperature
Operating: -4 to 122°F (-20 to 50°C) Storage: -40 to 158°F (-40 to 70°C)
Relative Humidity
10 to 85%, non-condensing
Dimensions (W x H)
11.83 x 4.30" (300.48 x 109.22 mm)
Weight
3.92 lb (1.78 kg)
The user manual for the Honeywell equIP HBD2FR1 Indoor/Outdoor IR Bullet IP HBD2FR1 can be downloaded in .pdf
format if it did not come with your new wired ip cameras, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other Honeywell users keep a unique electronic library
for Honeywell wired ip camerass,
where you can use our link to download the user manual for the Honeywell equIP HBD2FR1 Indoor/Outdoor IR Bullet IP HBD2FR1.
The user manual lists all of the functions of the Honeywell equIP HBD2FR1 Indoor/Outdoor IR Bullet IP HBD2FR1,
all the basic and advanced features and tells you how to use the wired ip cameras.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from Honeywell service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the Honeywell equIP HBD2FR1 Indoor/Outdoor IR Bullet IP HBD2FR1. User manuals are also
available on the Honeywell website under Surveillance - Surveillance Video - Wired IP Cameras.
Question and answer discussion forum concerning user instructions and resolving problems with the Honeywell equIP HBD2FR1 Indoor/Outdoor IR Bullet IP HBD2FR1 - no comments have been made yet - be the first to add a comment