Operating instructions and pdf manual for use - Honeywell equIP HCW1F True Day/Night Wide Dynamic H.264 HCW1F User manual, User manual Honeywell equIP HCW1F True Day/Night Wide Dynamic H.264 HCW1F, Honeywell, equIP, HCW1F, True, Day/Night, Wide, Dy
User manual for Honeywell equIP HCW1F True Day/Night Wide Dynamic H.264 HCW1F
Manufacturer: Honeywell
Basic description and contents of package
Product classification: Surveillance - Surveillance Video - Wired IP Cameras
Safety instructions
Startup and operation of the wired ip cameras
Tips for setting up your Honeywell
Settings and expert assistance
Contact Honeywell service
Troubleshooting
Warranty information
Price: 506 USD
We recommend checking out our discussion threads on the Honeywell equIP HCW1F True Day/Night Wide Dynamic H.264 HCW1F,
which address similar problems with connecting and setting up Wired IP Cameras Honeywell.
User manual for the Honeywell equIP HCW1F True Day/Night Wide Dynamic H.264 HCW1F
The user manual for the Honeywell equIP HCW1F True Day/Night Wide Dynamic H.264 HCW1F provides
necessary instructions for the proper use of the product Surveillance - Surveillance Video - Wired IP Cameras.
The gray equIP HCW1F True Day/Night Wide Dynamic H.264 Indoor Box IP Camera from Honeywell is a high definition, wide dynamic, true Day/Night network camera that offers digital video surveillance. It provides 720p resolution at full frame rate. Progressive scan technology and 2D edge enhancement provide high clarity and definition. DNR (Digital Noise Reduction) results in significant storage savings without sacrificing image quality in low light. The 1/3" progressive scan CMOS sensor offers digital video surveillance technology with accurate color rendition through a wide variety of lighting conditions. This camera supports the ONVIF specification for interoperability between network video products.
This Day/Night camera adapts to varying lighting conditions to ensure high picture quality even in extreme low-light conditions. When the light level drops too low for accurate video identification in color, the camera moves the IR cut filter out of the optical path and then switches to B&W video for capturing more detail using the increased sensitivity of the CMOS sensor to IR light. In high contrast lighting conditions, this camera delivers high quality images and significantly good dynamic range (>100 dB). Designed for environments with difficult lighting, this camera offers the solution to capture the whole picture, regardless of the lighting condition or application.
A powerful and intuitive Web client allows fine tuning of the camera and the auto iris levels. This can also be performed from most DVR/NVR setup utilities. The equIP HCW1F True Day/Night Wide Dynamic H.264 Indoor Box IP Camera supports dual video streams and multiple compression formats with frame rates up to 30 fps. The compression parameters for the 2 video streams are independently configurable. The primary stream is dedicated to H.264. The secondary stream can be configured for H.264 or MJPEG. This camera features analog video out for aiming and focusing during setup.
The equIP HCW1F True Day/Night Wide Dynamic H.264 Indoor Box IP Camera has built-in PoE (Power over Ethernet) (IEEE 802.3af), which allows power to be supplied to the camera using standard network cabling, thereby eliminating the need for a separate power supply and associated wiring. In situations where PoE support does not exist, the unit can also be powered directly from a 24VAC power supply.
This camera uses Honeywell technology for video motion detection, tamper detection, remote firmware updating, and for secure storage of all camera settings. Video motion detection recognizes object motion within the field of view after which a simple on-screen notification alerts the user. Camera tamper detection notifies the user when a camera’s field of view is altered, blinded, or blurred. This ensures the video’s integrity and alerts the customer to either a live event or a system problem that is causing disruption to the video stream. Honeywell’s technology also allows users to remotely upload firmware to the camera. Setup is quick and easy, and can be customized through a Web client or from an NVR. The built-in Web server provides password-protected access to the camera’s video and network setup.
This camera is a network surveillance solution designed for object recognition that is required in locations where variable and low light conditions exist. Set-up is quick and easy, and can be customized through a Web client or from an NVR. This provides optimum performance for indoor applications, as well as outdoor applications when using an environmental housing.
If you own a Honeywell wired ip cameras and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the Honeywell equIP HCW1F True Day/Night Wide Dynamic H.264 HCW1F in the following formats:
*.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
Additional parameters of the Honeywell equIP HCW1F True Day/Night Wide Dynamic H.264 HCW1F:
Scanning System
Progressive scan
Image Sensor
1/3" CMOS
Number of Pixels
H x V: 1280 x 720
Minimum Illumination
0.1 lux color/0.07 lux B&W @ 50 IRE, F1.2
Dynamic Range
115 dB
Video Output
1 Vpp @ 75 Ω (AUX)
S/N Ratio
50 dB or more (AGC off)
AGC (Automatic Gain Control)
Off/On, selectable (20 to 40 dB)
Electronic Shutter
Automatic: 1/30 to 1/87,000 sec
White Balance
Auto, Manual, WBC Push
Audio
2-Way: Line in/out
Input Voltage
24 VAC, PoE IEEE 802.3af
Input Range
17 to 28 VAC
Surge Suppression
1.5 kW transient
Power Consumption
5 W (maximum) 24 VAC PoE: PD Type 1, Class 2
Integration
Open IP: ONVIF support and open API for software integration
Refer to theHoneywell's site for more information
Video Compression
Dual stream H.264 and/or H.264/MJPEG
Resolution
Primary Stream 1280 x 720 Typical 2.7 Mb/s H.264 bit rate, 30 fps, 28.48 GB storage/day
800 x 450 Typical 1.8 Mb/s H.264 bit rate, 30 fps, 18.98 GB storage/day
640 x 360 Typical 0.9 Mb/s H.264 bit rate, 30 fps, 9.49 GB storage/day
320 x 180 Typical 0.315 Mb/s H.264 bit rate, 30 fps, 3.32 GB storage/day
Frame Rate
Up to 30 fps video in all resolutions
Video Streaming
Dual streaming: H.264 and MJPEG Controllable frame rate and bandwidth Constant or variable bit rate
Security
Multiple user access levels with password protection
Video Access From Web Browser
Full control of all camera settings available to administrator
System Requirements
Minimum Web Browsing Pentium 4 CPU 3.1 GHz or faster 1 GB RAM (32-bit) or 2 GB RAM (64-bit) Windows XP SP3, 2003 Server R2 (32-bit), 7 (32-/64-bit), Vista SP1, and 2008 R2 (64-bit), Internet Explorer 8 or 9, Mozilla Firefox, and Google Chrome
Maintenance
Installation and Management: Honeywell IP Utility software identifies IP address, checks status of device, upgrades firmware over HTTP
Video Output: BNC connector Lens: 4-pin connector Power Input: Removable screw block Network: RJ-45 connector Alarm I/O: Removable screw block Audio In: 3.5 mm mono phone jack Audio Out: 3.5 mm mono phone jack
Temperature
Operating: 14 to 122°F (-10 to 50°C) Storage: -4 to 140°F (-20 to 60°C)
Relative Humidity
0 to 85%, non-condensing
Dimensions (W x H)
5.34 x 2.44" (135.64 x 61.98 mm)
Weight
1.1 lb (0.5 kg)
The user manual for the Honeywell equIP HCW1F True Day/Night Wide Dynamic H.264 HCW1F can be downloaded in .pdf
format if it did not come with your new wired ip cameras, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other Honeywell users keep a unique electronic library
for Honeywell wired ip camerass,
where you can use our link to download the user manual for the Honeywell equIP HCW1F True Day/Night Wide Dynamic H.264 HCW1F.
The user manual lists all of the functions of the Honeywell equIP HCW1F True Day/Night Wide Dynamic H.264 HCW1F,
all the basic and advanced features and tells you how to use the wired ip cameras.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from Honeywell service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the Honeywell equIP HCW1F True Day/Night Wide Dynamic H.264 HCW1F. User manuals are also
available on the Honeywell website under Surveillance - Surveillance Video - Wired IP Cameras.
Question and answer discussion forum concerning user instructions and resolving problems with the Honeywell equIP HCW1F True Day/Night Wide Dynamic H.264 HCW1F - no comments have been made yet - be the first to add a comment
Question and answer discussion forum concerning user instructions and resolving problems with the Honeywell equIP HCW1F True Day/Night Wide Dynamic H.264 HCW1F - no comments have been made yet - be the first to add a comment