|
User manual for ImmersionRC Vortex Race Quad with 5.8 GHz Video IRLVXAT5G8350
- Manufacturer: ImmersionRC
- Basic description and contents of package
- Product classification: Camcorders - Aerial Imaging & Drones - Aerial Imaging Platforms & Drones
- Safety instructions
- Startup and operation of the aerial imaging platforms & drones
- Tips for setting up your ImmersionRC
- Settings and expert assistance
- Contact ImmersionRC service
- Troubleshooting
- Warranty information
- Price: 449 USD
|
We recommend checking out our discussion threads on the ImmersionRC Vortex Race Quad with 5.8 GHz Video IRLVXAT5G8350,
which address similar problems with connecting and setting up Aerial Imaging Platforms & Drones ImmersionRC.
|
User manual for the ImmersionRC Vortex Race Quad with 5.8 GHz Video IRLVXAT5G8350
The user manual for the ImmersionRC Vortex Race Quad with 5.8 GHz Video IRLVXAT5G8350 provides
necessary instructions for the proper use of the product Camcorders - Aerial Imaging & Drones - Aerial Imaging Platforms & Drones.
Sporting a hull design that is a mixture of carbon fiber and injection plastic, the Vortex Race Quad from ImmersionRC strikes a balance between weight and robustness. It is a 285-size airframe that incorporates folding prop arms for easier storage and transport. The flight control system centers around the Open-Source Cleanflight firmware and there are a total of seven 32-bit ARM CPUs deployed throughout the aircraft - used for everything from controller LED indicators to regulating the ESCs. An integrated 5.8 GHz, 40-channel video transmitter is ready for you to connect a GoPro HERO3, HERO3+, or HERO4, or FPV camera such Mobius (available separately) to add an immersive experience to races as well as record the action.
In addition to what comes in the box, you will need a flight battery, transmitter (radio controller) and receiver, and, for FPV, a camera and FPV goggles or a field monitor with 5.8 GHz video receiver. Please refer to the Specifications tab for compatibility details.
|
If you own a ImmersionRC aerial imaging platforms & drones and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the ImmersionRC Vortex Race Quad with 5.8 GHz Video IRLVXAT5G8350 in the following formats:
- *.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
|
Additional parameters of the ImmersionRC Vortex Race Quad with 5.8 GHz Video IRLVXAT5G8350:
Flight Time | Dependent on batteries, flying style, and other factors | Camera Compatibility | GoPro: HERO3, HERO3+, HERO4 Mobius Runcam FatShark 600TVL CMOS (standard) FatShark 700TVL CMOS FatShark 900TVL CCD | CPU | STM32F103 32-bit ARM CPU | Operating System | Cleanflight (with API version matching that of the OSD) | Receiver Compatibility | Channels Required: Absolute minimum four; five recommended to support mode switch
Interface Standard: 3.3 to 5 V PPM Sum (all channels in one PPM stream)
Receiver Power: +5 V at 200 mA maximum (3.3 V supplied using the separately available Spektrum Rx cable) | IMU | Model: Invensense 6050
Sensors: 3-axis Gyro 3-axis Accelerometer Bosch BMP180 altimeter | Blackbox Support | Supported via the GPS port on the Vortex PDB | CPU | STM32F373 32-bit ARM processor | Resolution | 440 x 280 | Graphics | White with black border around all pixels | Settings | Programmable black/white levels | Model | Socketed custom NexWaveRF 5.8 GHz module | Channels | 40 initially, programmed via OSD | Bands | 5 (including the ImmersionRC/FatShark and RaceBand bands) | Frequencies | IRC/FS: 5740, 5760, 5780, 5800, 5820, 5840, 5860, 5880 MHz RaceBand (Channels 1 to 8): 5658, 5695, 5732, 5769, 5806, 5843, 5880, 5917 MHz Frequency A Band (Channels 1 to 8): 5865, 5845, 5825, 5805, 5785, 5765, 5745, 5725 MHz Frequency B Band (Channels 1 to 8):5733, 5752, 5771, 5790, 5809, 5828, 5847, 5866 MHz Frequency E Band (Channels 1 to 8):5705, 5685, 5665, 5645, 5885, 5905, 5925, 5945 MHz | Output Power | 350 mW ±1 dB | Audio Support | Stereo: Right channel used for telemetry, left channel unused | Recommended Antenna | Supplied SpiroNET Omni, Skew Planar, 4-leaf | External Video Tx Support | 5-pin PicoBlade connector (usable only when the RF module is removed)
Note: Using an external video transmitter does not allow OSD channel switching | Model | ImmersionRC EzESC | CPU | 4 x ARM 32-bit CPUs (one per ESC) | Output Power | 12 A continuous 16 A peak | Protocols | rotorSENSE OneShot125 | LED Array | 6 x 24-bit (RGB) LEDs at tail | Controller | 32-bit ARM CPU | Type | Recommended: 1300 mAh 3S; 45 to 90C LiPo (available separately) 1300 mAh 4S; 45 to 90 C LiPo (available separately) | Model | Standard Prop: Gemfan 5030 Upgrade Prop: HQ 5040 (available separately) | Maximum Prop Size | 6" / 15.2 cm | Model | OEM T-Motor 1806-2300 kV | Size | 285 | Dimensions | Folded: 11.8 x 4.3" / 300 x 110 mm | Weight | As Shipped: 12.4 oz / 350 g Typical with 1200 mAh 4S Battery: 1.1 lb / 497 g | Package Weight | 1.5 lb | Box Dimensions (LxWxH) | 15.9 x 6.3 x 3.8" | |
The user manual for the ImmersionRC Vortex Race Quad with 5.8 GHz Video IRLVXAT5G8350 can be downloaded in .pdf
format if it did not come with your new aerial imaging platforms & drones, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other ImmersionRC users keep a unique electronic library
for ImmersionRC aerial imaging platforms & droness,
where you can use our link to download the user manual for the ImmersionRC Vortex Race Quad with 5.8 GHz Video IRLVXAT5G8350.
The user manual lists all of the functions of the ImmersionRC Vortex Race Quad with 5.8 GHz Video IRLVXAT5G8350,
all the basic and advanced features and tells you how to use the aerial imaging platforms & drones.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from ImmersionRC service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the ImmersionRC Vortex Race Quad with 5.8 GHz Video IRLVXAT5G8350. User manuals are also
available on the ImmersionRC website under Camcorders - Aerial Imaging & Drones - Aerial Imaging Platforms & Drones.
Question and answer discussion forum concerning user instructions and resolving problems with the ImmersionRC Vortex Race Quad with 5.8 GHz Video IRLVXAT5G8350 - no comments have been made yet - be the first to add a comment
Post new comment/question/response regarding the ImmersionRC Vortex Race Quad with 5.8 GHz Video IRLVXAT5G8350
|
|
|
|
|