User manual JMR Electronics 32TB BlueStor 16-Bay SAS Expander SASS-JD-G3-32T
Operating instructions and pdf manual for use - JMR Electronics 32TB BlueStor 16-Bay SAS Expander SASS-JD-G3-32T User manual, User manual JMR Electronics 32TB BlueStor 16-Bay SAS Expander SASS-JD-G3-32T, JMR, Electronics, 32TB, BlueStor, 16-Bay, SA
User manual for JMR Electronics 32TB BlueStor 16-Bay SAS Expander SASS-JD-G3-32T
Startup and operation of the network attached storage drives
Tips for setting up your JMR Electronics
Settings and expert assistance
Contact JMR Electronics service
Troubleshooting
Warranty information
Price: 13 USD
We recommend checking out our discussion threads on the JMR Electronics 32TB BlueStor 16-Bay SAS Expander SASS-JD-G3-32T,
which address similar problems with connecting and setting up Network Attached Storage Drives JMR Electronics.
User manual for the JMR Electronics 32TB BlueStor 16-Bay SAS Expander SASS-JD-G3-32T
The user manual for the JMR Electronics 32TB BlueStor 16-Bay SAS Expander SASS-JD-G3-32T provides
necessary instructions for the proper use of the product Computers & Solutions - Networking - Network Attached Storage Drives.
The JMR ELECTRONICS 32TB BlueStor 16-Bay SAS Expander JBOD Dual BP With RAID Controller/ Drives/ Cables is a high capacity, dual backplane storage system complete with a RAID controller, 16x 2.0 TB 3.5" SATA 6.0 Gb/s hard drives, and 2x external SAS cables. The device boasts 16 hot-swappable SATA 6.0 Gb/s disk drive bays, also capable of supporting optional SAS 3.0 Gb/s drives, featuring fully redundant power and cooling via hot-swappable modules (SAS drives not included). It offers a transfer speed of up to 1700 MB/s. Utilizing zero cables in the data path and vertically installed drives, the Expander is capable of delivering higher performance and signal integrity, with cooler operating disk drives.
The disk canisters are constructed of lightweight, low-cost resin that minimizes drive vibration while offering superb air flow. Each canister has an integrated light pipe, latching handle and modular EMI shield for elegant simplicity. The SAS Expander possesses dual 4x SAS ports for host connectivity and concatenation to extra storage units via low-cost multi-lane SAS cables. It works with virtually every SAS and SATA-2 (3.5" form factor) disk drive on the market today, and is also compatible with a long list of host adapters and SAS RAID controllers. This SES 2.0 compliant device also boasts a unique Physical User Interface featuring real-time disk activity / failure status indicators, plus visible and audible alarms for power or cooling system failures. User-friendlier than the average Enterprise-class hardware, the BlueStor 3U rackmounts all have front-panel "on-off" and "alarm reset" switches.
Your SAS Expander is field-upgradable to the unique, patented PeSAN direct-attached PCI storage RAID system via replacement of a single plug-in module. The SAS Expander and PeSAN 3U rackmounts utilize interchangeable FRUs for simple expandability and reduced spares cost. A configuration with dual SAS expander modules is also possible for better performance, yielding up to 1.2 GB/s data throughput rates for high-demand applications. The use of SAS drives provides maximum bandwidth and I/O for higher performance environments. SATA drives are more affordable and better for Information Lifecycle Management (ILM), nearline storage, Content Addressable Storage (CAS), or disk-to-disk back-up deployments. The Expander also supports the intermixing of SAS and SATA disk drives within the same enclosure for unmatched configuration flexibility.
If you own a JMR Electronics network attached storage drives and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the JMR Electronics 32TB BlueStor 16-Bay SAS Expander SASS-JD-G3-32T in the following formats:
*.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
Additional parameters of the JMR Electronics 32TB BlueStor 16-Bay SAS Expander SASS-JD-G3-32T:
16x 2.0 TB 3.5" (8.9 cm) SATA 6.0 Gb/s vertically installed drives included
Transfer Rate
Up to 1700 MB/s
RAID
JBOD RAID controller included
Host
Dual 4x SAS ports for host connectivity and concatenation to extra storage units via low-cost multi-lane SAS cables
User Interface
Physical User Interface with real-time disk activity / failure status indicators, visible and audible alarms for power or cooling system failures Front-panel "on-off" and "alarm reset" switches
Services
SES 2.0 compliant
Construction
Disk canisters are made of lightweight, low-cost resin that minimizes drive vibration while offering superb air flow Each has an integrated light pipe, latching handle and modular EMI shield
Power Supply
2x 350 W (N+1) supplies with Power Factor Correction, including internal cooling fans Input: 100-260 VAC; 50-60 Hz Output: +5.0 V @ 35 A; -5.0 V @ 0.5 A; +12 V @ 22 A; -12 V @ 0.8 A; +3.3 V @ 20 A 2x external SAS cables included - 6.6' (2.0 m) long
Expansion
Utilizes interchangeable FRUs for simple expandability Configuration with dual SAS expander modules possible for better performance, yielding up to 1.2 GB/s data throughput rates for high-demand applications
The user manual for the JMR Electronics 32TB BlueStor 16-Bay SAS Expander SASS-JD-G3-32T can be downloaded in .pdf
format if it did not come with your new network attached storage drives, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other JMR Electronics users keep a unique electronic library
for JMR Electronics network attached storage drivess,
where you can use our link to download the user manual for the JMR Electronics 32TB BlueStor 16-Bay SAS Expander SASS-JD-G3-32T.
The user manual lists all of the functions of the JMR Electronics 32TB BlueStor 16-Bay SAS Expander SASS-JD-G3-32T,
all the basic and advanced features and tells you how to use the network attached storage drives.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from JMR Electronics service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the JMR Electronics 32TB BlueStor 16-Bay SAS Expander SASS-JD-G3-32T. User manuals are also
available on the JMR Electronics website under Computers & Solutions - Networking - Network Attached Storage Drives.
Question and answer discussion forum concerning user instructions and resolving problems with the JMR Electronics 32TB BlueStor 16-Bay SAS Expander SASS-JD-G3-32T - no comments have been made yet - be the first to add a comment