User manual Leader LV5770A Waveform Monitor for 3G/HD/SD SDI Signals LV5770A
Operating instructions and pdf manual for use - Leader LV5770A Waveform Monitor for 3G/HD/SD SDI Signals LV5770A User manual, User manual Leader LV5770A Waveform Monitor for 3G/HD/SD SDI Signals LV5770A, Leader, LV5770A, Waveform, Monitor, 3G/HD/SD
User manual for Leader LV5770A Waveform Monitor for 3G/HD/SD SDI Signals LV5770A
Manufacturer: Leader
Basic description and contents of package
Product classification: Professional Video - Signal Processing & Distribution - Waveform Monitors & Scopes
Safety instructions
Startup and operation of the waveform monitors & scopes
Tips for setting up your Leader
Settings and expert assistance
Contact Leader service
Troubleshooting
Warranty information
We recommend checking out our discussion threads on the Leader LV5770A Waveform Monitor for 3G/HD/SD SDI Signals LV5770A,
which address similar problems with connecting and setting up Waveform Monitors & Scopes Leader.
User manual for the Leader LV5770A Waveform Monitor for 3G/HD/SD SDI Signals LV5770A
The user manual for the Leader LV5770A Waveform Monitor for 3G/HD/SD SDI Signals LV5770A provides
necessary instructions for the proper use of the product Professional Video - Signal Processing & Distribution - Waveform Monitors & Scopes.
The LV5770A Waveform Monitor for 3G/HD/SD SDI Signals with SDI Input Card from Leader is a multi-SDI monitor that can monitor two 3G/HD/SD-SDI sources simultaneously and displays Picture, Waveform, Vector, 5-Bar, CINELITE II, and Status individually or in various screen combinations. Loudness, lip-sync, surround monitoring audio centric features are integrated in this monitor.
The 1-screen display feature can be used to show each of the different displays on a single screen, or the 4-screen multi display feature can be used to divide the screen into four areas with a different display shown in each area. The video signal waveform display, picture display, audio level meter display, and histogram display can be shown as a thumbnail display on the 1-screen display.
A screen capture feature that captures the screen as still images, a frame capture feature that captures single frames of SDI signals, and an error capture feature that automatically detects and captures error frames are available. Not only can captured data be displayed by the LV 5770A, but it can also be compared with an input signal or saved to a USB memory device. It is easy to view the saved data on a PC.
The LCD display is a 6.3" XGA screen (the effective resolution is 1024 × 768). In addition, the screen images are transmitted from a DVI-D connector that supports single link TMDS, so the screen image can be displayed larger than is possible on the LV 5770A through the use of an external LCD.
The input SDI signal can be generated as an 8-bit signal. Regardless of the SDI input signal, the output format can be set to YCBCR 4:2:2, YCBCR 4:4:4, or RGB 4:4:4. 3D video signals can be evaluated by applying the video signal for the left eye to channel A and the video signal for the right eye to channel B. The available picture display formats are anaglyph, convergence, overlay, wipe, checker, and flicker.
You can use the cursor to select any 3 points and display their luminance information using f-Stop numbers, percentage values, or level values. You can choose to analyze a single pixel or a small area by setting the size of the measured area to 1 pixel or to the average value for 9 or 81 pixels. You can display the luminance levels in the picture with different colors. This allows you to quickly determine the overall luminance distribution in the picture, and it makes it easy to spot overexposure, underexposure, and different luminance levels in dark areas.
On the status display, SDI signal transmission errors and various errors related to the embedded audio signal and ancillary data can be detected. In addition, the LV 5770A has event log, data dump, and external sync signal and SDI signal phase difference display features for analyzing SDI signals. Ancillary data is displayed along with the embedded line numbers and numbers of the corresponding standards in a list. This makes it possible to display detailed analyses.
The LTC and VITC that are embedded in an SDI signal and the D-VITC that is embedded in an SD-SDI signal can be displayed. The timecode can also be used for time stamps in the event log. The English closed captions (EIA-608, EIA-708, or VBI) that are embedded in an SDI signal can be superimposed over the image on the picture screen.
The LV 5770A has two external control connectors: an Ethernet port and a remote control connector. By connecting the Ethernet interface to a PC, you can control the LV 5770A remotely over TELNET, transfer files over FTP, control the LV 5770A remotely and detect errors over SNMP, and control the LV 5770A over HTTP. The remote control connector can be used to load presets, switch the input signal, and transmit errors.
If you own a Leader waveform monitors & scopes and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the Leader LV5770A Waveform Monitor for 3G/HD/SD SDI Signals LV5770A in the following formats:
*.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
Additional parameters of the Leader LV5770A Waveform Monitor for 3G/HD/SD SDI Signals LV5770A:
These formats can't be used in external sync mode HD dual link's 1080p/60, 1080p/59.94, and 1080p/50 3G's 720p/30, 720p/29.97, 720p/25, 720p/24, and 720p/23.98
Connector: 1 x DVI-D Output Signal: Digital signal of the LCD display Resolution: XGA (1024 × 768) Aspect Ratio: 4:3 Signal Format: Single link TMDS
Color Picture Monitor
Output Signal: Monitor output of the selected SDI input signal (channel A or B) Signal Format: Single link TMDS Color Space Conversion: YCBCR 4:2:2, YCBCR 4:4:4, RGB 4:4:4 (convertible between color spaces) Quantization Conversion: 8 bits, 10 bits, 12 bits Audio: SDI embedded audio channels 1 to 8 embedded in the output signal (LPCM only)
The following signals are not supported. 720p/24, 23.98 1080PsF/30, 29.97, 25, 24, 23.98 1080p/24, 23.98 (2048 x 1080) 1080PsF/24, 23.98 (2048 x 1080) The audio channel mapping is fixed.
Type: 2.0 Supported Media: USB memory device Function: Used to save captured data, event logs, preset data, data dumps, and loudness logs
Ethernet Port
Compliant Standard: IEEE802.3 Supported Protocol: TELNET, FTP, SNMP, HTTP, SNTP Connectors: RJ-45 Function: Remote control from an external PC Type: 10Base-T, 100Base-TX
Remote Control Connector
Function: Used to load preset settings, switch input channels, transmit the alarm signal, and start, stop, and clear the loudness measurement Control Signal: LV-TTL level (low active) Input Voltage Range: 0 to 5 VDC Control Connector: 15-pin Sub-D (female) Locking Screws: Inch screws (No.4-40UNC)
The user manual for the Leader LV5770A Waveform Monitor for 3G/HD/SD SDI Signals LV5770A can be downloaded in .pdf
format if it did not come with your new waveform monitors & scopes, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other Leader users keep a unique electronic library
for Leader waveform monitors & scopess,
where you can use our link to download the user manual for the Leader LV5770A Waveform Monitor for 3G/HD/SD SDI Signals LV5770A.
The user manual lists all of the functions of the Leader LV5770A Waveform Monitor for 3G/HD/SD SDI Signals LV5770A,
all the basic and advanced features and tells you how to use the waveform monitors & scopes.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from Leader service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the Leader LV5770A Waveform Monitor for 3G/HD/SD SDI Signals LV5770A. User manuals are also
available on the Leader website under Professional Video - Signal Processing & Distribution - Waveform Monitors & Scopes.
Question and answer discussion forum concerning user instructions and resolving problems with the Leader LV5770A Waveform Monitor for 3G/HD/SD SDI Signals LV5770A - no comments have been made yet - be the first to add a comment
Why is the blue light (wireless symbol)...what is it on...its a blue light. I have had these for years and have never had that light come on and it is not allowing me to print! What do I do to turn it off? ...K&M manual - K&M 200 Telescoping Microphone Stand (Black) 20000-500-55 Posted by: jpdaval69 2024-09-10 00:50:11
I need the service manual/schematic of Universal Audio Solo/610 Serial number: 2310 MfgDt: 0607.
I hope you have it and I'm willing to be charged for it.
Best Regards....True Dock not recognizing hard drives - Kingwin True Dock Super-Speed USB 3.0 to TD-2535U3 Posted by: bf1955 2024-08-22 15:34:26
True Dock is not recognizing HDD, the HDD light does not come on, even though the power light does come one....