User manual for Lectrosonics IFBT4 Frequency-Agile IFB Transmitter IFBT4-23
- Manufacturer: Lectrosonics
- Basic description and contents of package
- Product classification: Pro Audio - Location Sound - IFB & Cueing
- Safety instructions
- Startup and operation of the ifb & cueing
- Tips for setting up your Lectrosonics
- Settings and expert assistance
- Contact Lectrosonics service
- Warranty information
- Price: 845 USD
We recommend checking out our discussion threads on the Lectrosonics IFBT4 Frequency-Agile IFB Transmitter IFBT4-23,
which address similar problems with connecting and setting up IFB & Cueing Lectrosonics.
User manual for the Lectrosonics IFBT4 Frequency-Agile IFB Transmitter IFBT4-23
The user manual for the Lectrosonics IFBT4 Frequency-Agile IFB Transmitter IFBT4-23 provides
necessary instructions for the proper use of the product Pro Audio - Location Sound - IFB & Cueing.
The IFBT4 from Lectrosonics is a high-quality IFB transmitter designed for applications where long operating range and great audio quality are needed, such as broadcasting, film, and theater. The sleek, simple box can be used as a stand-alone unit, or patched into other widely-used intercom systems. The single XLR input connector is accompanied by four DIP-switches for selecting a mic, line, Clear Com, RTS1, or RTS2 audio source.
The Digital Hybrid Wireless technology allows the system to overcome channel noise by digital encoding and decoding audio in the transmitter and receiver, but sending the encoded signal over an analog FM signal. Due to the FM link being used, the system has all the benefits of traditional FM systems, including high range and resistance to interference, but thanks to the digital technology, the analog compander and artifacts are removed for greater audio quality.
The system is easy to use, featuring a menu-based, microprocessor-controlled system that is navigated with momentary buttons. The backlit LCD is bright and clear for easy reading. The casing is constructed from rugged aluminum to withstand the rigors of professional use, and it is small enough to use in any situation.
If you own a Lectrosonics ifb & cueing and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the Lectrosonics IFBT4 Frequency-Agile IFB Transmitter IFBT4-23 in the following formats:
- *.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
Additional parameters of the Lectrosonics IFBT4 Frequency-Agile IFB Transmitter IFBT4-23:
| Operating Frequency || 588.8 to 614.3 MHz |
| Frequencies || 256 Channels Per Block |
| Channel Spacing || 100 kHz |
| Spurious and Harmonic Suppression || 37 dBc Above 1 GHz |
| Frequency Stability || ±0.001% (10 ppm) @ 77°F (25°C) |
| Temperature Stability || ±0.001% (10 ppm) @ -22 to 122°F (-30 to +50°C) |
| Compatibility Modes || IFB, Digital Hybrid Wireless (400 Series), 100 Series, 200 Series, Mode 3, Mode 6 |
| Pilot Tone || 29.997 kHz IFB Mode, 32.765kHz 200 Mode, 400 Mode Step Selected, 32.768 kHz Mode 6 |
| Modulation || FM, ±20 kHz Deviation IFB & 100 Mode, ±75 kHz 200 & 400 Mode, ±50 kHz Mode 3 and Mode 6 |
| Audio Frequency Response || 100 Hz - 8 kHz, ±1 dB IFB Mode |
30 Hz - 20 kHz, ±1 dB 200 & 400 Mode
| Low Frequency Roll-Off || 3 dB Down @ 35 or 50 Hz, Menu Selectable |
| Signal to Noise Ratio || 90 dB Typical, A-Weighted |
| RF Power Output || 250 mW, Nominal |
| Output Impedance || 50 Ohms |
| Audio Input Level || Line, RTS1, RTS2: 0 dBu |
Clear Com: -10 dBu
Mic Dry Inputs: -42 dBu
| Audio Input Impedance || Balanced: Greater than 2 kOhms |
Unbalanced: Greater than 1 kOhm
| Gain || -18 to +24 dB, Software Selectable |
| Connectors || 1 x XLR Input Connector |
1 x BNC Antenna Connector
1 x DC Power Input
| Controls and Indicators || 4 x Mode Switches (For Selecting Type of Input Source) |
1 x Menu Button
2 x Select Buttons (Up/Down)
1 x Off/Tune/Xmit Switch
1 x Backlit LCD Display
| Power || 12-14 VDC, Typical, 200 mA Max |
| Dimensions (LxWxH) || 5.25 x 3.25 x 1.25" (133 x 83 x 32 mm) |
| Weight || 9 oz (255 g) |
| Package Weight || 3.1 lb |
| Box Dimensions (LxWxH) || 14.0 x 10.5 x 4.2" |
The user manual for the Lectrosonics IFBT4 Frequency-Agile IFB Transmitter IFBT4-23 can be downloaded in .pdf
format if it did not come with your new ifb & cueing, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other Lectrosonics users keep a unique electronic library
for Lectrosonics ifb & cueings,
where you can use our link to download the user manual for the Lectrosonics IFBT4 Frequency-Agile IFB Transmitter IFBT4-23.
The user manual lists all of the functions of the Lectrosonics IFBT4 Frequency-Agile IFB Transmitter IFBT4-23,
all the basic and advanced features and tells you how to use the ifb & cueing.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from Lectrosonics service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the Lectrosonics IFBT4 Frequency-Agile IFB Transmitter IFBT4-23. User manuals are also
available on the Lectrosonics website under Pro Audio - Location Sound - IFB & Cueing.
Question and answer discussion forum concerning user instructions and resolving problems with the Lectrosonics IFBT4 Frequency-Agile IFB Transmitter IFBT4-23 - no comments have been made yet - be the first to add a comment
Post new comment/question/response regarding the Lectrosonics IFBT4 Frequency-Agile IFB Transmitter IFBT4-23