|
User manual for Link Electronics DigiFlex 1170A/1070 1x8 SD SDI or 1170A/1070
- Manufacturer: Link Electronics
- Basic description and contents of package
- Product classification: Professional Video - Signal Processing & Distribution - Distribution Amplifiers (DA's)
- Safety instructions
- Startup and operation of the distribution amplifiers (da's)
- Tips for setting up your Link Electronics
- Settings and expert assistance
- Contact Link Electronics service
- Troubleshooting
- Warranty information
- Price: 365 USD
|
We recommend checking out our discussion threads on the Link Electronics DigiFlex 1170A/1070 1x8 SD SDI or 1170A/1070,
which address similar problems with connecting and setting up Distribution Amplifiers (DA's) Link Electronics.
|
User manual for the Link Electronics DigiFlex 1170A/1070 1x8 SD SDI or 1170A/1070
The user manual for the Link Electronics DigiFlex 1170A/1070 1x8 SD SDI or 1170A/1070 provides
necessary instructions for the proper use of the product Professional Video - Signal Processing & Distribution - Distribution Amplifiers (DA's).
The DigiFlex 1170A/1070 1x8 SD SDI or ASI Distribution Amplifier from Link Electronics restores the incoming signal to its proper amplitude. The signal is reshaped with automatic equalization, re-sliced and DC restored. The amplifier comes with a removable rear cell which provides eight outputs. A module fault LED on the front edge of the module indicates that the input signal level is below a pre-set threshold. This threshold may be adjusted to suit the users needs. A second module fault LED is located on the rear cell and is therefore visible from the back of the equipment rack. A rear I/O module must be selected for the specific front signal module. The signal module and rear I/O module, with the flexibility of the frame, place virtually no limits on the versatility of the DigiFlex 1000 system. The 1170A accepts composite 143 Mb/s, component 270 Mb/s, and 16:9 aspect ratio 360 Mb/s standards. The module is transparent to the incoming signal data rate and has a fixed output level of 800 mV.
|
If you own a Link Electronics distribution amplifiers (da's) and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the Link Electronics DigiFlex 1170A/1070 1x8 SD SDI or 1170A/1070 in the following formats:
- *.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
|
Additional parameters of the Link Electronics DigiFlex 1170A/1070 1x8 SD SDI or 1170A/1070:
| Signal Type | Video | | Standard | 143 Mb/s, SMPTE 259M-C; 177 Mb/s; 270 Mb/s; 360 Mb/s | | Impedance | 75 ohms | | Return Loss | >20 dB | | Signal Level | 800 mV ±10% | | CMR | 30 Vpp, up to 60 Hz | | Connectors | BNC | | Equalization | Automatic up to 30 dB | | Number of Outputs | 8 | | Standards | 143 Mb/s, SMPTE 259M-C; 177 Mb/s; 270 Mb/s; 360 Mb/s | | Connectors | BNC | | Impedance | 75 ohms | | Return Loss | >20 dB | | Signal Level | 800 mV ±10% | | DC Offset | 0 V ±0.5 V | | Rise & Fall | 1 nsec ±250 psec | | Overshoot | <10% of amplitude | | Delay | Through: 4 nsec | | Input Cable Length | Maximum 500' (152 m) | | Front Controls & Indicators | Power: Green LED
No Signal: Red LED
No Signal Detect Adj: Potentiometer
Detect Point: Test Point
+5 VDC: Test Point
Ground: Test Point | | Ambient Temperature | 32 to 122°F (0 to 50°C) | | Humidity | 10 to 90% non-condensing | | Power | 320 mW | | Dimensions | 3 x 1 x 10" (8 x 3 x 25 cm) | | Weight | 7.25 oz (205.53 g) | |
The user manual for the Link Electronics DigiFlex 1170A/1070 1x8 SD SDI or 1170A/1070 can be downloaded in .pdf
format if it did not come with your new distribution amplifiers (da's), although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other Link Electronics users keep a unique electronic library
for Link Electronics distribution amplifiers (da's)s,
where you can use our link to download the user manual for the Link Electronics DigiFlex 1170A/1070 1x8 SD SDI or 1170A/1070.
The user manual lists all of the functions of the Link Electronics DigiFlex 1170A/1070 1x8 SD SDI or 1170A/1070,
all the basic and advanced features and tells you how to use the distribution amplifiers (da's).
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from Link Electronics service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the Link Electronics DigiFlex 1170A/1070 1x8 SD SDI or 1170A/1070. User manuals are also
available on the Link Electronics website under Professional Video - Signal Processing & Distribution - Distribution Amplifiers (DA's).
Question and answer discussion forum concerning user instructions and resolving problems with the Link Electronics DigiFlex 1170A/1070 1x8 SD SDI or 1170A/1070 - no comments have been made yet - be the first to add a comment
Post new comment/question/response regarding the Link Electronics DigiFlex 1170A/1070 1x8 SD SDI or 1170A/1070
|
|
|
|
|
