Operating instructions and pdf manual for use - MuxLab CCTV IP Extender Kit 500110 User manual, User manual MuxLab CCTV IP Extender Kit 500110, MuxLab, CCTV, IP, Extender, Kit, 500110, Video
User manual for MuxLab CCTV IP Extender Kit 500110
We recommend checking out our discussion threads on the MuxLab CCTV IP Extender Kit 500110,
which address similar problems with connecting and setting up Ethernet Extenders MuxLab.
User manual for the MuxLab CCTV IP Extender Kit 500110
The user manual for the MuxLab CCTV IP Extender Kit 500110 provides
necessary instructions for the proper use of the product Surveillance - Surveillance Video - Wired Networking - Ethernet Extenders.
The MuxLab CCTV IP Extender Kit connects 2 CCTV IP cameras to a 10/100BaseT LAN over extended distances via a single coax or CAT 5e twisted pair cable. It supports transmission at a distance up to 650’ (200 m) at 100 MB/s and up to 1 mile (1.6 km) at 25 MB/s.
If you own a MuxLab ethernet extenders and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the MuxLab CCTV IP Extender Kit 500110 in the following formats:
*.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
Additional parameters of the MuxLab CCTV IP Extender Kit 500110:
Specifications
Environment
CCTV IP
Devices
CCTV IP cameras, NVR, IP encoders, network switches and any device with a 10/100 MB/s Ethernet port, supporting IP
Transmission
Transparent to the user
Standard
Ethernet: IEEE 802.3 10BaseT, IEEE 802.3U 100Base-TX, IP ver 4 and 6 Line side: VDSL-DMT: ITU-T G993.1 VDSL, ITU-T G997.1, G.993.2 VDSL2 (profile 17a)
Distance versus Speed
Asymetric-Downstream/Upstream CAT 5e/6: 5000' (1.5 km) => 17 MB/s 1.2 MB/s 4000' (1.2 km) => 22 MB/s 5.3 MB/s 3000' (0.9 km) => 28 MB/s 10 MB/s 2000' (0.6 km) => 34 MB/s 21 MB/s 1000' (0.3 km) => 44 MB/s 31 MB/s RG59/U 20AWG Coax: 5000' (1.5 km) => 31 MB/s 14 MB/s 4000' (1.2 km) => 39 MB/s 21 MB/s 3000' (0.9 km) => 39 MB/s 26 MB/s 2000' (0.6 km) => 44 MB/s 28 MB/s 1000' (0.3 km) => 44 MB/s 31 MB/s
With two (2) cameras connected, maximum distance depends on throughput/resolution/compression ratio of the camera; 5 to 25 MB/s per camera
Cable Type
Between unit: Coax 75 ohm or Cat5e/6 twisted-pair AWG24 or better Between Ethernet port: 10 MB/s: CAT3, 4 or 5 UTP up to 330' (100 m) 100 MB/s: CAT5, 5E or 6 UTP up to 330' (100 m)
1 isolated BNC 75 ohm female to connect remote unit 1 isolated RJ45 to connect remote unit 1 or 2 metallic RJ45 with leds for Ethernet with auto reversal 1 power connector, 2 mm
Pin Configurations
RJ45 connector: Pin 4 & Pin 5 (1 pair required only, blue and white/blue) BNC: 75 ohms coax cable: Center & Shield (shield is isolated from chassis)Polarity insensitive
Power Supplies
100-240 V/5 VDC/625 mA 2 power supplies with for NA, Eur and UK
Power Consumption
1.2 W each unit
Temperature
Operating: 32 to 140° F (0 to 60° C) Storage: -67 to 185° F (-55 to 85° C) Humidity: up to 95% non-condensing
The user manual for the MuxLab CCTV IP Extender Kit 500110 can be downloaded in .pdf
format if it did not come with your new ethernet extenders, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other MuxLab users keep a unique electronic library
for MuxLab ethernet extenderss,
where you can use our link to download the user manual for the MuxLab CCTV IP Extender Kit 500110.
The user manual lists all of the functions of the MuxLab CCTV IP Extender Kit 500110,
all the basic and advanced features and tells you how to use the ethernet extenders.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from MuxLab service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the MuxLab CCTV IP Extender Kit 500110. User manuals are also
available on the MuxLab website under Surveillance - Surveillance Video - Wired Networking - Ethernet Extenders.
Question and answer discussion forum concerning user instructions and resolving problems with the MuxLab CCTV IP Extender Kit 500110 - no comments have been made yet - be the first to add a comment
Why is the blue light (wireless symbol)...what is it on...its a blue light. I have had these for years and have never had that light come on and it is not allowing me to print! What do I do to turn it off? ...K&M manual - K&M 200 Telescoping Microphone Stand (Black) 20000-500-55 Posted by: jpdaval69 2024-09-10 00:50:11
I need the service manual/schematic of Universal Audio Solo/610 Serial number: 2310 MfgDt: 0607.
I hope you have it and I'm willing to be charged for it.
Best Regards....
Question and answer discussion forum concerning user instructions and resolving problems with the MuxLab CCTV IP Extender Kit 500110 - no comments have been made yet - be the first to add a comment