|
User manual for MuxLab HDMI Over IP Extender kit with PoE 500752
- Manufacturer: MuxLab
- Basic description and contents of package
- Product classification: TVs & Entertainment - Switchers, Extenders & Wireless - HDMI Signal Extenders
- Safety instructions
- Startup and operation of the hdmi signal extenders
- Tips for setting up your MuxLab
- Settings and expert assistance
- Contact MuxLab service
- Troubleshooting
- Warranty information
- Price: 525 USD
|
We recommend checking out our discussion threads on the MuxLab HDMI Over IP Extender kit with PoE 500752,
which address similar problems with connecting and setting up HDMI Signal Extenders MuxLab.
|
User manual for the MuxLab HDMI Over IP Extender kit with PoE 500752
The user manual for the MuxLab HDMI Over IP Extender kit with PoE 500752 provides
necessary instructions for the proper use of the product TVs & Entertainment - Switchers, Extenders & Wireless - HDMI Signal Extenders.
The HDMI Over IP Extender with PoE from MuxLab multicasts digital video and audio signals to one or more receivers up to 330' away using CAT5e/6 cable.
|
If you own a MuxLab hdmi signal extenders and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the MuxLab HDMI Over IP Extender kit with PoE 500752 in the following formats:
- *.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
|
Additional parameters of the MuxLab HDMI Over IP Extender kit with PoE 500752:
Environment | HDMI 1.3a, Ethernet, IGMP | Devices | DVD, plasma, projectors, monitors, TV, PC, laptops, servers supporting HDMI | Transmission | Transparent to the user | Bandwidth | 225 MHz | Compression | MJPEG | Bit Rate | 60 Mbps | Latency | With one (1) frame at 30 fps, there is 33 msec latency | Network Requirements | Point to Point: 100BaseT Multipoint: 1000BaseT | IR Frequency | 38 KHz | Configuration | Point-to-Point, Point-to-Multipoint, Multipoint-to-Multipoint* *For multipoint-to-multipoint configuration the Gigabit Ethernet switch must support the IGMP communications protocol | Connectors | HDMI receptacle x 1 RJ-45S for Cat 5e/6 unshielded or shielded twisted pair via 10/100BaseT x 1 3.5mm jacks for IR emitter/sensor x 1 DIP switches for device ID addressing x 4 | DIP Switch | 4-position DIP to set Device ID | Maximum Distance | Based on a maximum length of 6.6' (2 m) of HDMI cable per end: Cat5e/6: 330' (100 m) up to 1080p* *Gigabit Ethernet required for 1080p Note: When installed in an electrically noisy environment, an STP cable must be used. Also, cross-connection reduces the effective distance depending on the grade of twisted cable used | RJ45 Pin Configuration | RJ-45 Link: Pin 1 (R) Pin 2 (T) Pin 3 (R) Pin 6 (T) Pin 4 (R) Pin 5 (T) Pin 7 (R) Pin 8 (T) | Cable | One (1) Cat 5e/6 or better twisted pair cables required | Power Supply | Two (2) 110-240 V/5 VDC power supplies with interchangeable blades | Power Consumption | Transmitter: 2.9 W Receiver: 1.8 W | Temperature | Operating: 32-104°F (0-40°C) Storage: -4-185°F (-20-85°C) | Humidity | Up to 95% non-condensing | Enclosure | Metal | Compliance | Regulatory: FCC, CE, RoHS Flammability: 94V0 | Dimensions | 3.7 x 3.68" x 0.97" (94 x 93.5 x 24.6 mm) | Package Weight | 2.95 lb | Box Dimensions (LxWxH) | 12.5 x 7.6 x 4.6" | |
The user manual for the MuxLab HDMI Over IP Extender kit with PoE 500752 can be downloaded in .pdf
format if it did not come with your new hdmi signal extenders, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other MuxLab users keep a unique electronic library
for MuxLab hdmi signal extenderss,
where you can use our link to download the user manual for the MuxLab HDMI Over IP Extender kit with PoE 500752.
The user manual lists all of the functions of the MuxLab HDMI Over IP Extender kit with PoE 500752,
all the basic and advanced features and tells you how to use the hdmi signal extenders.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from MuxLab service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the MuxLab HDMI Over IP Extender kit with PoE 500752. User manuals are also
available on the MuxLab website under TVs & Entertainment - Switchers, Extenders & Wireless - HDMI Signal Extenders.
Question and answer discussion forum concerning user instructions and resolving problems with the MuxLab HDMI Over IP Extender kit with PoE 500752 - no comments have been made yet - be the first to add a comment
Post new comment/question/response regarding the MuxLab HDMI Over IP Extender kit with PoE 500752
|
|
|
|
|