|
User manual for Nady U-2100/HM-35 UHF Omnidirectional Condenser U-1100/HM-35
- Manufacturer: Nady
- Basic description and contents of package
- Product classification: Pro Audio - Live Sound - Wireless Systems
- Safety instructions
- Startup and operation of the wireless systems
- Tips for setting up your Nady
- Settings and expert assistance
- Contact Nady service
- Troubleshooting
- Warranty information
- Price: 130 USD
|
We recommend checking out our discussion threads on the Nady U-2100/HM-35 UHF Omnidirectional Condenser U-1100/HM-35,
which address similar problems with connecting and setting up Wireless Systems Nady.
|
User manual for the Nady U-2100/HM-35 UHF Omnidirectional Condenser U-1100/HM-35
The user manual for the Nady U-2100/HM-35 UHF Omnidirectional Condenser U-1100/HM-35 provides
necessary instructions for the proper use of the product Pro Audio - Live Sound - Wireless Systems.
The U-2100/HM-35 UHF Omnidirectional Condenser Wireless System with 1 x HM-35 Headmic Headworn Omnidirectional Condenser Microphone from Nady Systems includes a 100-channel U-2100 dual receiver, an AC-2100 power supply, two HT-1100 handheld transmitter microphones, and one HM-35 Headmic Headworn Omnidirectional Condenser Microphone. The U-2100 has 100 selectable UHF frequencies to provide clear and transparent audio with full-frequency response. The rugged ABS housing doesn’t give way for a long time. The system offers uninterrupted PLL UHF performance with 120 dB dynamic range and line-of-sight operation up to 500'.
|
If you own a Nady wireless systems and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the Nady U-2100/HM-35 UHF Omnidirectional Condenser U-1100/HM-35 in the following formats:
- *.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
|
Additional parameters of the Nady U-2100/HM-35 UHF Omnidirectional Condenser U-1100/HM-35:
Operating Frequency Range | (A) 480-504.75 MHz and (B) 505-529.75 MHz | Frequency Synthesizer | PLL (100 channels selectable) 250 kHz/step | System Frequency Selection | <0.005% stability | Frequency Response | 50 Hz - 18 kHz +/-3 dB | Dynamic Range | 120 dB | Harmonic Distortion | <0.5% | Modulation | FM (F3E) +/-25 kHz normal, +/-75 kHz max | Operating Range | 150-250' (45.7-76.2 m) typical, 500' (152.4 m) max line-of-sight | Receiver Type | Dual conversion Super Heterodyne | Selectivity | 60 dB, normal +/-75 kHz offset | Image Rejection | -70 dB, minimum Sensitivity, -107 dBm, normal Spurious rejection 65 dB, normal | Mute Threshold | Adjustable (-65 to -95 dBm) | Controls | GROUP/CHANNEL/AUTOSCAN, IR ASC Sync buttons, Power ON/OFF, Switch, MUTE level pot, VOLUME level pot | Display | Two Digits LCD panel indicating selected Channel; RF/AF bar graph indicator, Battery levels, TX Channel A and B LED indicators | Audio Outputs | Line Out Unbalanced, adjustable line-audio output; Mic Out Balanced, fixed mic-level audio output | Output Impedance | Unbalanced, 1 kOhm and Balanced for 600-Ohm loads | Power Requirements | 13.5 VDC/0.4 A | Antennas | Dual removable swivel-BNC antenna | Housing Material | ABS Plastic | Dimensions (W x D x H) | 8 x 6 x 1.25" (20.4 x 15.3 x 3.2 cm) | Weight | 17.9 oz (556.8 g) | RF Output Power | +14 dBm (25 mW typical)/50 Ohms | Harmonic & Spurious Emissions | -50 dBc normal | Input Impedance | 10 kOhms | Controls | Power OFF/ON, MUTE | LED Display | Channel/Frequency, Battery status, Mute LED | Antenna Type | Integral | Battery Type | 2 x AA alkaline or NiMH | Battery Life | 8-10 hours typical, alkaline | Housing Material | ABS Plastic | Dimensions (L x D) | 9.5 x 1.5" (24.1 x 5.1 cm) | Weight | 10.4 oz (323.5 g) without batteries | Element | Back electret condenser | Pattern | Omnidirectional | Frequency Response | 20 Hz to 20 kHz | Sensitivity | -42 ± 3 dB | Impedance | 1 kOhm: ± 5% | Power Supply | 1.5-10 VDC | Max SPL Level | 130 dB | Cable Length | 0.059" (1.5 mm) | Wiring | GND = Pin 1, Hot (+) = Pin 3 -> 2 kOhms -> Pin 2 | Output Connector | 3.5 mm phono plug | Dimensions | 0.197" (5 mm) | Weight | 1.65 oz (23 g) | |
The user manual for the Nady U-2100/HM-35 UHF Omnidirectional Condenser U-1100/HM-35 can be downloaded in .pdf
format if it did not come with your new wireless systems, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other Nady users keep a unique electronic library
for Nady wireless systemss,
where you can use our link to download the user manual for the Nady U-2100/HM-35 UHF Omnidirectional Condenser U-1100/HM-35.
The user manual lists all of the functions of the Nady U-2100/HM-35 UHF Omnidirectional Condenser U-1100/HM-35,
all the basic and advanced features and tells you how to use the wireless systems.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from Nady service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the Nady U-2100/HM-35 UHF Omnidirectional Condenser U-1100/HM-35. User manuals are also
available on the Nady website under Pro Audio - Live Sound - Wireless Systems.
Question and answer discussion forum concerning user instructions and resolving problems with the Nady U-2100/HM-35 UHF Omnidirectional Condenser U-1100/HM-35 - no comments have been made yet - be the first to add a comment
Post new comment/question/response regarding the Nady U-2100/HM-35 UHF Omnidirectional Condenser U-1100/HM-35
|
|
|
|
|