|
User manual for Neutrik Isolated BNC Cable Jack for Panel Mount, Solder NBB75SI
- Manufacturer: Neutrik
- Basic description and contents of package
- Product classification: Professional Video - Cables - Video Connectors
- Safety instructions
- Startup and operation of the video connectors
- Tips for setting up your Neutrik
- Settings and expert assistance
- Contact Neutrik service
- Troubleshooting
- Warranty information
|
We recommend checking out our discussion threads on the Neutrik Isolated BNC Cable Jack for Panel Mount, Solder NBB75SI,
which address similar problems with connecting and setting up Video Connectors Neutrik.
|
User manual for the Neutrik Isolated BNC Cable Jack for Panel Mount, Solder NBB75SI
The user manual for the Neutrik Isolated BNC Cable Jack for Panel Mount, Solder NBB75SI provides
necessary instructions for the proper use of the product Professional Video - Cables - Video Connectors.
The Isolated BNC Cable Jack for Panel Mount, Solder Version from Neutrik is a machined brass connector with a gold plated center contact. The jack provides a rugged, non-abrasive connection that can stand up to long term use.
|
If you own a Neutrik video connectors and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the Neutrik Isolated BNC Cable Jack for Panel Mount, Solder NBB75SI in the following formats:
- *.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
|
Additional parameters of the Neutrik Isolated BNC Cable Jack for Panel Mount, Solder NBB75SI:
Connection Type | BNC 75 ohm | Gender | Female | Signal Type | HD, SDI, Video, AES/EBU, composite, YUV, RGB, RGBH, RGBHV | Contact Resistance | ≤ 3 mΩ (inner) (inner) | Comment | ≤ 2 | Dielectric Strength | 1,5 kVdc | Impedance | 75 ohms | Insulation Resistance | > 5 GΩ | Rated Voltage | 500 V | VSWR | ≤ 1.03 / > 37 dB up to 1 GHz ≤ 1.05 / > 32 dB up to 2 GHz ≤ 1.08 / > 28 dB u | Insertion Force | < 25 N | Lifetime | > 1000 mating cycles | Wiring | Solder contacts | Locking Device | Bayonett | Mounting Direction | Front | Chassis | 12.7 mm | Contacts | Brass (CuZn39Pb3), 0.2 µm AuCo (Center contact) | Insert | PTFE | Shell | Polyacetal (POM) (Insulation Shell) | Shell Plating | Optalloy | Standard Compliance | IEC 6016908, MIL 348A | Temperature Range | 86 to 185° F (-30 to 85° C) | Package Weight | 0.05 lb | Box Dimensions (LxWxH) | 3.5 x 2.0 x 0.2" | |
The user manual for the Neutrik Isolated BNC Cable Jack for Panel Mount, Solder NBB75SI can be downloaded in .pdf
format if it did not come with your new video connectors, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other Neutrik users keep a unique electronic library
for Neutrik video connectorss,
where you can use our link to download the user manual for the Neutrik Isolated BNC Cable Jack for Panel Mount, Solder NBB75SI.
The user manual lists all of the functions of the Neutrik Isolated BNC Cable Jack for Panel Mount, Solder NBB75SI,
all the basic and advanced features and tells you how to use the video connectors.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from Neutrik service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the Neutrik Isolated BNC Cable Jack for Panel Mount, Solder NBB75SI. User manuals are also
available on the Neutrik website under Professional Video - Cables - Video Connectors.
Question and answer discussion forum concerning user instructions and resolving problems with the Neutrik Isolated BNC Cable Jack for Panel Mount, Solder NBB75SI - no comments have been made yet - be the first to add a comment
Post new comment/question/response regarding the Neutrik Isolated BNC Cable Jack for Panel Mount, Solder NBB75SI
|
|
|
|
|