User manual NVT NV-EC1701-KIT2 Dual Camera EoC Transmission NV-EC1701-KIT2
Operating instructions and pdf manual for use - NVT NV-EC1701-KIT2 Dual Camera EoC Transmission NV-EC1701-KIT2 User manual, User manual NVT NV-EC1701-KIT2 Dual Camera EoC Transmission NV-EC1701-KIT2, NVT, NV-EC1701-KIT2, Dual, Camera, EoC, Transmis
User manual for NVT NV-EC1701-KIT2 Dual Camera EoC Transmission NV-EC1701-KIT2
We recommend checking out our discussion threads on the NVT NV-EC1701-KIT2 Dual Camera EoC Transmission NV-EC1701-KIT2,
which address similar problems with connecting and setting up Ethernet Extenders NVT.
User manual for the NVT NV-EC1701-KIT2 Dual Camera EoC Transmission NV-EC1701-KIT2
The user manual for the NVT NV-EC1701-KIT2 Dual Camera EoC Transmission NV-EC1701-KIT2 provides
necessary instructions for the proper use of the product Surveillance - Surveillance Video - Wired Networking - Ethernet Extenders.
The NVT NV-EC1701-KIT2 Dual Camera EoC Transmission System is a compact media converter that allows 10/100 BaseT Ethernet and PoE power to be transmitted using coax cable. These EoC devices are typically used in legacy installations where existing coax is re-deployed as part of an upgrade to IP cameras. Class 2 power of 48 VDC is delivered to one transceiver, which distributes it to up to 4 remote transceivers, and their PoE cameras.
This transceiver is extremely simple to use with no IP or MAC addressing required. Status LEDs indicate power and link connectivity/activity for RJ45 and BNC ports.
If you own a NVT ethernet extenders and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the NVT NV-EC1701-KIT2 Dual Camera EoC Transmission NV-EC1701-KIT2 in the following formats:
*.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
Additional parameters of the NVT NV-EC1701-KIT2 Dual Camera EoC Transmission NV-EC1701-KIT2:
RJ45 Ethernet Interface: RJ45, auto-crossover Coax Building Wiring Interface: BNC, RG-59/U or similar 1 control room EoC transceiver plus up to 4 remote EoC transceivers are supported
4-pair Cat5 or better
RJ45 Ethernet Interface: up to 328' (100 m) Coax Building Wiring Interface: up to 2,500' (750 m)
Distance will often be shorter due to power delivery voltage-drop on the wire Power supplies may be used simultaneously at more than one EoC transceiver
10/100 Base T, half / full duplex, auto- negotiation, auto MDI / MDIX cross-over
80 Mbps ±10% useable bandwidth per network
This power sourcing equipment (PSE) supports powered devices (PDs) that are compatible with IEEE 802.3af, or PDs that draw up to 45 W Always on: 48 VDC outputs appear on pins 4 & 5 and 7 & 8, and are current-protected and transient-protected
50 to 100 Ω
OFDM, 128-bit AES encryption
Blue "Power On"
BNC / RJ45: Green "Link"
2 W @ 48 VDC per transceiver
Power Supply: External inline, with an IEC380-C14 power inlet and 6' (1.8 m) line-cord Input Voltage: 100 to 240 VAC, 50/60 Hz A molded P1J 5.5 mm barrel connector provides a Class 2 (SELV) 48 VDC regulated output Use only the power cord provided with the unit or equivalent UL approved type SPT-2, SVT, or SJT, 18/3 AWG 100 to 240 VAC, 1 A, 140°F (60°C), maximum 15' (4.5 m) long One end with IEC380-C13 appliance coupler and the other end with NEMA 1015P or equivalent for country
14 to 122°F (-10 to 50°C)
-22 to 158°F (-30 to 70°C)
20 to 85% non-condensing
UL Listed to IEC/UL 60950-1 complies with FCC part 15B limits
The user manual for the NVT NV-EC1701-KIT2 Dual Camera EoC Transmission NV-EC1701-KIT2 can be downloaded in .pdf
format if it did not come with your new ethernet extenders, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other NVT users keep a unique electronic library
for NVT ethernet extenderss,
where you can use our link to download the user manual for the NVT NV-EC1701-KIT2 Dual Camera EoC Transmission NV-EC1701-KIT2.
The user manual lists all of the functions of the NVT NV-EC1701-KIT2 Dual Camera EoC Transmission NV-EC1701-KIT2,
all the basic and advanced features and tells you how to use the ethernet extenders.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from NVT service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the NVT NV-EC1701-KIT2 Dual Camera EoC Transmission NV-EC1701-KIT2. User manuals are also
available on the NVT website under Surveillance - Surveillance Video - Wired Networking - Ethernet Extenders.
Question and answer discussion forum concerning user instructions and resolving problems with the NVT NV-EC1701-KIT2 Dual Camera EoC Transmission NV-EC1701-KIT2 - no comments have been made yet - be the first to add a comment
I have the smoking buds 2. Attempted the reset by holding the volume + and - buttons together. I heard the beep. Saw the lights flashed blue and red. Then lights turned steady on voilet. Unable to pair. Unable to turn off. Unable to reset.
Please he...Pepper 100 - LTM Pepper 100W Fresnel PH-154B Posted by: Dave Luken 2017-05-23 18:33:29