|
User manual for Optex PIE-1 POE IP Outdoor Encoder PIE-1
- Manufacturer: Optex
- Basic description and contents of package
- Product classification: Surveillance - Alarm Systems - Motion Detector Accessories
- Safety instructions
- Startup and operation of the motion detector accessories
- Tips for setting up your Optex
- Settings and expert assistance
- Contact Optex service
- Troubleshooting
- Warranty information
- Price: 125 USD
|
We recommend checking out our discussion threads on the Optex PIE-1 POE IP Outdoor Encoder PIE-1,
which address similar problems with connecting and setting up Motion Detector Accessories Optex.
|
User manual for the Optex PIE-1 POE IP Outdoor Encoder PIE-1
The user manual for the Optex PIE-1 POE IP Outdoor Encoder PIE-1 provides
necessary instructions for the proper use of the product Surveillance - Alarm Systems - Motion Detector Accessories.
The PIE-1 POE IP Outdoor Encoder from Optex is an encoder that converts analog relay outputs to original ASCII code (Redwall Event Code) for Redwall SIP, Redscan, and Redbeam detectors. You can connect to all leading VMS platforms to control IP cameras. PIE-1 is compatible with Power over Ethernet (PoE) IEEE802.3 af/at, thereby making it possible to supply power using a PoE hub or switch. Only one LAN cable is needed to connect PIE-1 to a PoE hub or switch, thereby reducing installation time and cost.
|
If you own a Optex motion detector accessories and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the Optex PIE-1 POE IP Outdoor Encoder PIE-1 in the following formats:
- *.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
|
Additional parameters of the Optex PIE-1 POE IP Outdoor Encoder PIE-1:
Signal Input | 5-input for dry contacts (N.C. only) | Alarm Output | Redwall Event Code (UDP / TCP) | Switch | Ethernet converter / LAN through | Settings | Function: Use web browser | Protocols Supported | IPv4, ARP, UDP, TCP, ICMP, HTTP | LED Indicators | Normal: Green light is ON when the power is supplied by PoE When Communicating: Yellow light blinks during communication | Power Supply | PoE (IEEE802.3af/at compliant) | Power Output | 24 VDC 800 mA maximum, 12 VDC 50 mA maximum | Installation | Outdoor (Inside of the waterproof case) | Operating Temperature | -40 to 140˚F (-40 to 60˚C) | Operating Humidity | 95% RH. maximum | Dimensions | 3.66 x 3.73 x 1.30" (92.96 x 94.74 x 33.02 mm) | Weight | Main Unit: 3.2 oz (90.7 g) | |
The user manual for the Optex PIE-1 POE IP Outdoor Encoder PIE-1 can be downloaded in .pdf
format if it did not come with your new motion detector accessories, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other Optex users keep a unique electronic library
for Optex motion detector accessoriess,
where you can use our link to download the user manual for the Optex PIE-1 POE IP Outdoor Encoder PIE-1.
The user manual lists all of the functions of the Optex PIE-1 POE IP Outdoor Encoder PIE-1,
all the basic and advanced features and tells you how to use the motion detector accessories.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from Optex service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the Optex PIE-1 POE IP Outdoor Encoder PIE-1. User manuals are also
available on the Optex website under Surveillance - Alarm Systems - Motion Detector Accessories.
Question and answer discussion forum concerning user instructions and resolving problems with the Optex PIE-1 POE IP Outdoor Encoder PIE-1 - no comments have been made yet - be the first to add a comment
Post new comment/question/response regarding the Optex PIE-1 POE IP Outdoor Encoder PIE-1
|
|
|
|
|