User manual Peavey IPR2 5000 2-Channel Power Amp 03004350
Operating instructions and pdf manual for use - Peavey IPR2 5000 2-Channel Power Amp 03004350 User manual, User manual Peavey IPR2 5000 2-Channel Power Amp 03004350, Peavey, IPR2, 5000, 2-Channel, Power, Amp, 03004350, Video
User manual for Peavey IPR2 5000 2-Channel Power Amp 03004350
Manufacturer: Peavey
Basic description and contents of package
Product classification: Pro Audio - Live Sound - Power Amplifiers
Safety instructions
Startup and operation of the power amplifiers
Tips for setting up your Peavey
Settings and expert assistance
Contact Peavey service
Troubleshooting
Warranty information
Price: 800 USD
We recommend checking out our discussion threads on the Peavey IPR2 5000 2-Channel Power Amp 03004350,
which address similar problems with connecting and setting up Power Amplifiers Peavey.
User manual for the Peavey IPR2 5000 2-Channel Power Amp 03004350
The user manual for the Peavey IPR2 5000 2-Channel Power Amp 03004350 provides
necessary instructions for the proper use of the product Pro Audio - Live Sound - Power Amplifiers.
The Peavey IPR2 5000 2-Channel Power Amp features an advanced design that makes it lightweight while increasing output power, reliability and thermal efficiency. This amplifier is designed with a resonant switch-mode power supply and a high-speed Class D topology that yields a high audio resolution and efficiency. Advanced technology and extensive protection circuitry allow for efficient operation under difficult loads and power conditions.
The DDT (Distortion Detection Technique) circuitry ensures trouble-free operation into loads as low as 2Ω. DDT protects drivers and ensures that sonic integrity is maintained, even in extreme overload conditions. This amp also features 2-channel independent fourth order Linkwitz-Riley crossovers and a variable-speed fan housed in a lightweight aluminum chassis. The amplifier’s high-efficiency design allows it to operate at very low temperatures without the need for massive heat sinks to cool.
If you own a Peavey power amplifiers and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the Peavey IPR2 5000 2-Channel Power Amp 03004350 in the following formats:
*.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
Additional parameters of the Peavey IPR2 5000 2-Channel Power Amp 03004350:
Rated Power
2ch x 2 Ω: 3,230 W 20ms repetitive burst / 2,530 W 1% THD both channels driven @ 1 kHz 2ch x 4 Ω: 1,985 W 20ms repetitive burst / 1,700 W 1% THD / 1,470 W 0.15% THD, both channels driven @ 1 kHz 2ch x 8 Ω: 1,175 W 20ms repetitive burst / 1,025 W 1% THD / 880 W 0.15% THD, both channels driven @ 1 kHz
Rated power readings made with BW: <10 hz to 22 khz. All power measurements made at 120 and 240 VAC. 2 Ω power is time limited by circuit breaker.
RMS Power
1 x 2,900 W at 2 Ω 1 x 1,780 W at 4 Ω 1 x 975 W at 8 Ω 2 x 2,525 W at 2 Ω 2 x 1,510 W at 4 Ω 2 x 890 W at 8 Ω
Minimum Load Impedance
2 Ω
RMS Voltage Swing
105 V (maximum)
Frequency Response
20 Hz to 22 kHz; +/- 0.5 dB at 1 W
20 Hz to 20 kHz 2ch x 2 Ω: <0.5% @ 2,250 W 20 Hz to 4 kHz, decreasing to 1,640 W @ 20 kHz, both channels driven 20 Hz to 20 kHz 2ch x 4 Ω: <0.15% @ 1,400 W 20 Hz to 10 kHz, decreasing to 1,350 W @ 20 kHz, both channels driven 20 Hz to 20 kHz 2ch x 8 Ω: <0.15% @ 860 W 20 Hz to 4 kHz, increasing to 1,000 W @ 20 kHz, both channels driven
CMRR
Input: > - 75 dB @ 1 kHz
Voltage Gain
x 40 (+32dB)
Crossover
100 Hz switchable 2nd order high pass and 3rd low pass per channel
Crosstalk
> -60 dB @ 1 kHz @ 700 W power @ 8 Ω
Hum and Noise
> -105 dB, "A" weighted referenced to rated power @ 4 Ω
Slew Rate
> 12 V / μs
Damping Factor
> 210:1 @ 20 Hz to 1 kHz @ 8 Ω
Input Sensitivity
1.95 V +/- 3% for 1 kHz 4 Ω rated power, 1.83 V +/- 3% for 1 kHz 2 Ω rated power
Input Impedance
20 kΩ, balanced and 10 kΩ, unbalanced
Current Draw
@ 1/8: 1,435 VA (890 W) @ 2 Ω, 920 VA (525 W) @ 4 Ω, 625 VA (335 W) @ 8 Ω @ 1/3: 3,050 VA (2,155 W) @ 2 Ω, 1,880 VA (1,200 W) @ 4 Ω, 1,200 VA (715 W) @ 8 Ω
Idle Consumption
195 VA, 90 W
Cooling
3 temperature-dependent variable speed fans
Controls
2 front-panel attenuators, crossover select switch for HPF, Normal and LPF
LED Indicators
5 LED indicators per channel: Active, Signal, DDT, Temperature and DC
Protection
Thermal, DC, subsonic, incorrect loads, under and over voltage
Connectors
Inputs: Dual combination 1/4" XLR Outputs: 2 x 1/4" thru, 1 x 2-pin & 1 x 4-pin twist-lock connector
Construction
0.062" (0.16 cm) thick aluminum
Dimensions
3.5 x 19.0 x 17.0" (9.0 x 48.3 x 43.2 cm) Handle: 0.6" (1.5 cm)
The user manual for the Peavey IPR2 5000 2-Channel Power Amp 03004350 can be downloaded in .pdf
format if it did not come with your new power amplifiers, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other Peavey users keep a unique electronic library
for Peavey power amplifierss,
where you can use our link to download the user manual for the Peavey IPR2 5000 2-Channel Power Amp 03004350.
The user manual lists all of the functions of the Peavey IPR2 5000 2-Channel Power Amp 03004350,
all the basic and advanced features and tells you how to use the power amplifiers.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from Peavey service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the Peavey IPR2 5000 2-Channel Power Amp 03004350. User manuals are also
available on the Peavey website under Pro Audio - Live Sound - Power Amplifiers.
Question and answer discussion forum concerning user instructions and resolving problems with the Peavey IPR2 5000 2-Channel Power Amp 03004350 - no comments have been made yet - be the first to add a comment
Question and answer discussion forum concerning user instructions and resolving problems with the Peavey IPR2 5000 2-Channel Power Amp 03004350 - no comments have been made yet - be the first to add a comment