|
User manual for Pelco EthernetConnect EC-4BY1SWC/U Series 4-Port EC4BY1SWUPOEW
- Manufacturer: Pelco
- Basic description and contents of package
- Product classification: Computers & Solutions - Networking - Network Switches, Bridges & Hubs
- Safety instructions
- Startup and operation of the network switches, bridges & hubs
- Tips for setting up your Pelco
- Settings and expert assistance
- Contact Pelco service
- Troubleshooting
- Warranty information
- Price: 927 USD
|
We recommend checking out our discussion threads on the Pelco EthernetConnect EC-4BY1SWC/U Series 4-Port EC4BY1SWUPOEW,
which address similar problems with connecting and setting up Network Switches, Bridges & Hubs Pelco.
|
User manual for the Pelco EthernetConnect EC-4BY1SWC/U Series 4-Port EC4BY1SWUPOEW
The user manual for the Pelco EthernetConnect EC-4BY1SWC/U Series 4-Port EC4BY1SWUPOEW provides
necessary instructions for the proper use of the product Computers & Solutions - Networking - Network Switches, Bridges & Hubs.
The Pelco EthernetConnect EC-4BY1SWC/U Series 4-Port UTP Self-Managed PoE Switch provides four ports operating at 10/100 Mbps and combines these four electrical ports into a single electrical extended port that forwards the data to the next network device up to 3,000/2,000 ft over a single UTP cable. It features uplink management functionality that operates on the Ethernet over copper (EoC). The switch comes pre-programmed, preventing network video flooding with DIP switch selection of the extended distance port as uplink.
|
If you own a Pelco network switches, bridges & hubs and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the Pelco EthernetConnect EC-4BY1SWC/U Series 4-Port EC4BY1SWUPOEW in the following formats:
- *.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
|
Additional parameters of the Pelco EthernetConnect EC-4BY1SWC/U Series 4-Port EC4BY1SWUPOEW:
Operating Voltage | Non PoE: 12 VDC (9 VDC when in USRACK or EURACK; available separately) PoE: 48 VDC | Power Consumption | 10 W; PSE source power up to 120 W | Current Protection | Automatic resettable solid-state current limiters | MTBF | >100,000 hours | LED Indicators | Data link/data activity; power; Power over Ethernet (PoE+) | Data Interface | Ethernet | Data Rate | 10/100 Mbps; IEEE802.3 compliant Ethernet Ports: Full/half-duplex; Uplink Port: Full-duplex | Standards | PoE+: IEEE802.3af/at RFC: 768 UDP, 2068 HTTP, 793 TCP, 791 IP, 1783 TFTP, 894 IP over Ethernet | Maximum Transmission Distance | 3,000' (910 m) @ 10 Mbps over UTP 1 pair 2,000' (610 m) @ 100 Mbps over UTP 1 pair
Distance obtained using Pelco's in-house testing mirroring installations. Factors such as coaxial and copper cable quality, the number of connectors and splices in the cable run, the use of PoE, and environmental conditions encountered within the installation might affect the actual transmission distance and should be taken into consideration. | Connectors | Power: Terminal block UTP: RJ-45 Data: 4 x RJ-45, 10/100BASE-T/TX supporting PoE+ | Mounting | Wall or flat surface screw attachment | Recommended | ECPS-12VDC-3A EthernetConnect 12 VDC, 3 A power supply for non-PoE pass-through mode applications ECPS-48VDC-5A EthernetConnect 48 VDC, 5 A DIN-rail mount power supply for PoE applications USRACK and EURACK Rack-mount chassis, 14-slot, 9 VDC, 6.5 A, internal power supply RACK1B Single-width blank module for empty rack slots | Operating Temperature | -40 to 167°F (-40 to 75°C) | Storage Temperature | -40 to 176°F (-40 to 80°C) | Relative Humidity | 0 to 95%, non-condensing | Certifications | CE, Class A FCC, Part 15, Class A UL/cUL Listed C-Tick Designed to meet NEMA TS-1/TS-2 and the Caltrans traffic signal control equipment environmental standards | Dimensions (D x W x H) | 6.1 x 5.3 x 1.1" (15.5 x 13.5 x 2.8 cm) | Weight | 1.0 lb (0.45 kg) | |
The user manual for the Pelco EthernetConnect EC-4BY1SWC/U Series 4-Port EC4BY1SWUPOEW can be downloaded in .pdf
format if it did not come with your new network switches, bridges & hubs, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other Pelco users keep a unique electronic library
for Pelco network switches, bridges & hubss,
where you can use our link to download the user manual for the Pelco EthernetConnect EC-4BY1SWC/U Series 4-Port EC4BY1SWUPOEW.
The user manual lists all of the functions of the Pelco EthernetConnect EC-4BY1SWC/U Series 4-Port EC4BY1SWUPOEW,
all the basic and advanced features and tells you how to use the network switches, bridges & hubs.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from Pelco service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the Pelco EthernetConnect EC-4BY1SWC/U Series 4-Port EC4BY1SWUPOEW. User manuals are also
available on the Pelco website under Computers & Solutions - Networking - Network Switches, Bridges & Hubs.
Question and answer discussion forum concerning user instructions and resolving problems with the Pelco EthernetConnect EC-4BY1SWC/U Series 4-Port EC4BY1SWUPOEW - no comments have been made yet - be the first to add a comment
Post new comment/question/response regarding the Pelco EthernetConnect EC-4BY1SWC/U Series 4-Port EC4BY1SWUPOEW
|
|
|
|
|