|
User manual for Pelco FH-LI Series Fortified IP Camera System FHLIXP316
- Manufacturer: Pelco
- Basic description and contents of package
- Product classification: Surveillance - Surveillance Video - Wired IP Cameras
- Safety instructions
- Startup and operation of the wired ip cameras
- Tips for setting up your Pelco
- Settings and expert assistance
- Contact Pelco service
- Troubleshooting
- Warranty information
|
We recommend checking out our discussion threads on the Pelco FH-LI Series Fortified IP Camera System FHLIXP316,
which address similar problems with connecting and setting up Wired IP Cameras Pelco.
|
User manual for the Pelco FH-LI Series Fortified IP Camera System FHLIXP316
The user manual for the Pelco FH-LI Series Fortified IP Camera System FHLIXP316 provides
necessary instructions for the proper use of the product Surveillance - Surveillance Video - Wired IP Cameras.
The Pelco FH-LI Series Fortified IP Camera System includes the Sarix IXP31 3MP box camera and a 13M series CS-mount 2.2-6mm megapixel varifocal lens in a low-temperature enclosure with an integrated power supply. The system is prewired and ready for immediate installation. The Sarix Enhanced camera, combined with the megapixel lens, provides Full HD images in a variety of lighting conditions.
|
If you own a Pelco wired ip cameras and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the Pelco FH-LI Series Fortified IP Camera System FHLIXP316 in the following formats:
- *.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
|
Additional parameters of the Pelco FH-LI Series Fortified IP Camera System FHLIXP316:
| Sensor | 1/3" | | Resolution | 2048 x 1536 (3 MP) | | Imager | CMOS | | Imager Readout | Progressive scan | | Electronic Shutter | 1/5 to 1/10,000 sec | | Dynamic Range | 65 dB | | White Balance | 2,500 to 8,000°K | | Digital Noise Reduction (DNR) | Yes (ON/OFF selectable) | | Minimum Illumination | f/1.2
Color: 33 ms: 0.3 lux, 200 ms: 0.02 lux
Mono: 33 ms: 0.1 lux, 200 ms: 0.01 lux | | Mechanical IR Cut Filter | Yes (AUTO/MANUAL selectable), with different set points on lux | | Lens Mount | CS mount | | Auto Iris | DC drive | | Focus | Auto back focus | | Video Streams | Up to 2 simultaneous streams, plus service stream; the secondary stream is variable based on the setup of the primary stream | | Video Overlay | Camera name, time, date | | Available Resolutions | 4:3 Aspect Ratio:
2048 x 1536 (3.1 MP), 1600 x 1200 (1.9 MP), 1280 x 960 (1.2 MP), 800 x 600 (0.5 MP), 640 x 480 (0.3 MP), 320 x 240 (0.1 MP)
16:9 Aspect Ratio:
1920 x 1080 (2.1 MP), 1280 x 720 (0.9 MP), 1024 x 576 (0.6 MP), 320 x 180 (0.1 MP) | | Frame Rate | 20 (full), 16.67, 15, 12.5, 10, 5, 1 ips (depending on the coding, resolution, and stream configuration) | | Video Encoding | H.264 high or main profiles; and MJPEG | | Bit Rate | Constrained bit rate (CBR), variable bit rate (VBR) with target range | | Streaming | 320 x 240 or 320 x 180; 2 ips, MJPEG | | Snapshot | JPEG capture at resolution of live view stream | | Masking | 4 configurable windows | | Streaming | Dual-channel | | Input | Line in/terminal block | | Output | Line out/terminal block | | Encoding | G.711 A-law/G.711 U-law | | Supported Protocols | TCP/IP, UDP, ICMP, IPv4, SNMP v2c/v3, HTTP, HTTPS, SSL, SSH, SMTP, FTP, RTSP, UPnP, DNS, NTP, RTP, RTCP, and LDAP | | Users | Unicast: 1 administrator, up to 4 viewers
Multicast: Unlimited users H.264 | | Security Access | Multiple user access levels with password protection | | Port | RJ-45 connector for 100Base-TX | | Input Power | PoE (IEEE 802.3af, Class 3), 24 VAC nominal, 18 to 32 VAC range | | Power Consumption | 8 W | | Local Storage | Up to 32 GB on Micro SDHC or SDXC card (sold separately) | | Alarm | Input: 1
Output: 1; PhotoMOS relay (30 V, 1 A)
Triggers: Unsupervised mode that detects switch closures (N.O. and N.C.) | | Video Management Software | Digital Sentry 7.3 (or later); Endura 2.0 (or later); Third-party VMS through Pelco API 1.0 and ONVIF Profile S | | Mobile Application Support | Integrated to Pelco Mobile App | | Analytics | Simple motion detection and camera sabotage | | Local Storage | Capture 5- or 10-second video clips on camera sabotage, motion detection, or alarm input; record video continuously in the case of network outage with option to overwrite; access video through FTP protocol | | Firmware | Cameras discovered and firmware upgraded through Pelco Device Utility 2 version 2.2; cameras discovered and firmware upgrade through Endura Utilities | | Web Browser | Microsoft Internet Explorer 8.0 and later | | Certifications | CE - EN 55022 (Class A), EN 50130-4, EN 60950-1
FCC (Class A) - 47 CFR Part 15
UL and cUL Listed - UL 60950-1, CAN/CSA-C22.2 No. 60950-1-07
ICES-003
KCC
NOM | | Operating Temperature | 14 to 122°F (-10 to 50°C) | | Storage Temperature | -40 to 140°F (-40 to 60°C) | | Humidity | 15 to 85%, RH noncondensing | | Construction | Aluminum and polycarbonate | | Dimensions (Diam. x L) | 2.75 x 5.51" (7 x 14 cm) | | Weight | 3.89 lb (1.76 kg) without lens | | Type | Varifocal | | Format Size | 1/3" | | Mount | CS | | Focal Length | 2.2 to 6 mm | | Aperture | f/1.3 to 2.0 | | Iris Operation | DC iris | | Image Size | 6 mm diameter | | Focus Operation | Manual | | Angle of View | Wide Vertical: 91°
Wide Horizontal: 120°
Wide Diagonal: 146°
Tele Vertical: 35°
Tele Horizontal: 46°
Tele Diagonal: 57° | | Minimum Object Distance (M.O.D.) | 0.3 m | | Flange Focal Distance | 12.5 mm | | Operating Temperature | 14 to 122°F (-10 to 50°C) | | Dimensions (W x H x D) | 1.6 x 1.9 x 2.1" (4.1 x 4.7 x 5.4cm) | | Weight | 0.13 lb (0.06 kg) | | Construction | Enclosure: High-grade thermoplastic
Mounting Arm: Die-cast aluminum
Window: High optic Lexan | | Latches | Latching: 6 captive Phillips head screws | | Window | Window Face Plate: 6 Phillips head screws | | Recommended | Mounts: ECM100 Corner mount adapter; EPM Medium duty mount for pipe/pole applications | | Connections | RJ-45, fiber, or coaxial (adapters may be required for connection to the arm component's pre-wired data connector) | | Input Voltage | 21.6 to 26.4 VAC | | Power Consumption | 3.9 A maximum at 24 VAC | | Internal Heater | Heating Element: Thermostatically controlled | | Certifications | CE
Class A
UL/cUL listed
IK10 mechanical impact resistance
Meets NEMA Type 4X and IP66 standards (enclosure and data connection compartment of wall arm)
Meets NEMA Type 3R and IP54 standards (power connection area in wall arm) | | Operating Environment | Outdoor | | Operating Temperature | -76 to 113°F (-60 to 45°C) | | Storage Temperature | 14 to 140°F (-10 to 60°C) | | Dimensions (W x D x H) | 7.56 x 25.24 x 15.40" (19.21 x 64.11 x 39.12 cm) | | Weight | 16.0 lb (7.2 kg) | |
The user manual for the Pelco FH-LI Series Fortified IP Camera System FHLIXP316 can be downloaded in .pdf
format if it did not come with your new wired ip cameras, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other Pelco users keep a unique electronic library
for Pelco wired ip camerass,
where you can use our link to download the user manual for the Pelco FH-LI Series Fortified IP Camera System FHLIXP316.
The user manual lists all of the functions of the Pelco FH-LI Series Fortified IP Camera System FHLIXP316,
all the basic and advanced features and tells you how to use the wired ip cameras.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from Pelco service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the Pelco FH-LI Series Fortified IP Camera System FHLIXP316. User manuals are also
available on the Pelco website under Surveillance - Surveillance Video - Wired IP Cameras.
Question and answer discussion forum concerning user instructions and resolving problems with the Pelco FH-LI Series Fortified IP Camera System FHLIXP316 - no comments have been made yet - be the first to add a comment
Post new comment/question/response regarding the Pelco FH-LI Series Fortified IP Camera System FHLIXP316
|
|
|
|
|
