|
User manual for Pelco POE16ATN 16-Port Gigabit High PoE IEEE802.3at POE16ATNUS
- Manufacturer: Pelco
- Basic description and contents of package
- Product classification: Surveillance - Surveillance Video - Wired Networking - Power over Ethernet (PoE)
- Safety instructions
- Startup and operation of the power over ethernet (poe)
- Tips for setting up your Pelco
- Settings and expert assistance
- Contact Pelco service
- Troubleshooting
- Warranty information
|
We recommend checking out our discussion threads on the Pelco POE16ATN 16-Port Gigabit High PoE IEEE802.3at POE16ATNUS,
which address similar problems with connecting and setting up Power over Ethernet (PoE) Pelco.
|
User manual for the Pelco POE16ATN 16-Port Gigabit High PoE IEEE802.3at POE16ATNUS
The user manual for the Pelco POE16ATN 16-Port Gigabit High PoE IEEE802.3at POE16ATNUS provides
necessary instructions for the proper use of the product Surveillance - Surveillance Video - Wired Networking - Power over Ethernet (PoE).
The Pelco POE16ATN 16-Port Gigabit High PoE IEEE802.3at Midspan is designed to meet the demanding data rate and power requirements of IP cameras with high-quality streaming video capabilities. The midspan offers total output power of 538W (33.6W per port), and meets the IEEE802.3at standard for detection, connection, disconnection, and fault protection. It also provides SNMP network management. The POE4ATN Midspan is compatible with 10/100/1000Base-T systems and has an input voltage range of 90 to 264 VAC.
|
If you own a Pelco power over ethernet (poe) and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the Pelco POE16ATN 16-Port Gigabit High PoE IEEE802.3at POE16ATNUS in the following formats:
- *.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
|
Additional parameters of the Pelco POE16ATN 16-Port Gigabit High PoE IEEE802.3at POE16ATNUS:
Voltage Rating | Input: 90 to 264 VAC | AC Input Current (Rated) | 9 A (RMS) maximum for 90 VAC 4.5 A (RMS) maximum for 240 VAC | Leakage Current | 3.5 mA maximum at 254 VAC, 60 Hz | AC Input Frequency | 47 to 63 Hz | AC Inrush Current | 30 A (RMS) maximum for 115 VAC 60 A (RMS) maximum for 230 VAC | Total Output Power | Per Port: 33.6 W Total: 538 W (16 ports) | Ripple | Ripple & Regulation: 100 mV maximum | Efficiency | 75% (typical) at maximum load; 120 VAC, 60 Hz | Hold-Up Time | 16 ms minimum; 120 VAC and maximum load | Voltage Protection Rating | Transient O/P Voltage Protection: 60 V maximum at switch on and off at any AC line phase | Turn-On Time from Auto Power Down | 20 sec maximum at maximum load and 120 VAC, 60 Hz | Isolation | Primary to Secondary: 4242 VDC for 1 minute Primary to Ground: 2121 VDC for 1 minute Secondary to Ground: 2121 VDC for 1 minute | Protection | Over Voltage/Current Short Circuit: Outputs equipped with short circuit protection and overload protection according to IEEE802.3at specification; the output can be shorted permanently without damage | NIC Support | For remote management by secure IP access | Input Connector | AC: IEC320 inlet 3-pin (C14) | Temperature | Operating: 32 to 104°F (0 to 40°C) Storage: -4 to 149°F (-25 to 65°C) Over Temperature Protection: Automatic shutdown without damage | Maximum Humidity Gradient | 5 to 90% | Immunity | Immunity EN50082-1 ESD: EN61000-4-2, level 3 RS: EN61000-4-3, level 2 EFT: EN61000-4-4, level 2 Surge: EN61000-4-5, level 3 CS: EN61000-4-6, level 2 Voltage Dips: EN61000-4-11 Harmonic: EN61000-3-2 class A | Certifications | CE, EN55022 class A CE, EN55022 class B FCC, part 15, class A with UTP cabling FCC, part 15, class B with FTP cabling UL/cUL listed | Dimensions (WxHxD) | 17.26 x 1.77 x 8.94" (43.84 x 4.49 x 22.70 cm) | |
The user manual for the Pelco POE16ATN 16-Port Gigabit High PoE IEEE802.3at POE16ATNUS can be downloaded in .pdf
format if it did not come with your new power over ethernet (poe), although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other Pelco users keep a unique electronic library
for Pelco power over ethernet (poe)s,
where you can use our link to download the user manual for the Pelco POE16ATN 16-Port Gigabit High PoE IEEE802.3at POE16ATNUS.
The user manual lists all of the functions of the Pelco POE16ATN 16-Port Gigabit High PoE IEEE802.3at POE16ATNUS,
all the basic and advanced features and tells you how to use the power over ethernet (poe).
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from Pelco service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the Pelco POE16ATN 16-Port Gigabit High PoE IEEE802.3at POE16ATNUS. User manuals are also
available on the Pelco website under Surveillance - Surveillance Video - Wired Networking - Power over Ethernet (PoE).
Question and answer discussion forum concerning user instructions and resolving problems with the Pelco POE16ATN 16-Port Gigabit High PoE IEEE802.3at POE16ATNUS - no comments have been made yet - be the first to add a comment
Post new comment/question/response regarding the Pelco POE16ATN 16-Port Gigabit High PoE IEEE802.3at POE16ATNUS
|
|
|
|
|