User manual Profoto B1 500 Air Battery-Powered 2-Light Location Kit 901092
Operating instructions and pdf manual for use - Profoto B1 500 Air Battery-Powered 2-Light Location Kit 901092 User manual, User manual Profoto B1 500 Air Battery-Powered 2-Light Location Kit 901092, Profoto, B1, 500, Air, Battery-Powered, 2-Light,
User manual for Profoto B1 500 Air Battery-Powered 2-Light Location Kit 901092
Overall Rating: 5.0
100% of respondents would recommend this to a friend.
We recommend checking out our discussion threads on the Profoto B1 500 Air Battery-Powered 2-Light Location Kit 901092,
which address similar problems with connecting and setting up Monolight Kits Profoto.
User manual for the Profoto B1 500 Air Battery-Powered 2-Light Location Kit 901092
The user manual for the Profoto B1 500 Air Battery-Powered 2-Light Location Kit 901092 provides
necessary instructions for the proper use of the product Lighting & Studio - Strobe Lighting - Monolight Kits.
B1 500 Air Battery-Powered 2-Light Location Kit from Profoto consists of two B1 500 off-camera, battery-powered AirTTL flash heads each with a battery, a 4.5A Fast Battery Charger, car charger and a custom location backpack. With the use of an optional Air Remote TTL-C, TTL-N, Air Remote or Air Sync users will have access to wireless triggering from distances up to 1,000'.
If you own a Profoto monolight kits and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the Profoto B1 500 Air Battery-Powered 2-Light Location Kit 901092 in the following formats:
*.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
Additional parameters of the Profoto B1 500 Air Battery-Powered 2-Light Location Kit 901092:
Specifications
Maximum Watt/Seconds
500W/s +/- 1/20 Stop
Guide Number
291 @6.56' (2.0 m), 100 ISO with Magnum reflector
Display
LCD Indicators for: Power in 1/10 stop increments Battery charge level Modeling light status Recycle alert: Beep, Dim, Beep and Dim, silent Sync: Slave, radio channel and group Back panel control: Modeling light button Sync button Test, On/Off button Power dial
Flash Variability
In 1/10 or 1 Stop increments 9.0 Stops: 2.0-10 power level (1/256-1/1) 2.0-500W/s
Recycle Time
Minimum/Maximum: 0.1-1.9 sec. Quick Burst Mode: 20 frames per sec.
Flash Duration
Normal mode (t0.5): 1/11,000 - 1/1,000 sec. min/max power Freeze mode (0.05): 1/19,000 - 1/1,000 sec. min/max power
Color Temperature
5,600K Normal mode: +/- 150K over entire power range, +/- 20K flash to flash Freeze mode: +/- 800K over entire power range, +/- 50K flash to flash
Beam Angle
77 Degrees with built-in reflector and opal protective glass
Modeling Light
20W LED (70W tungsten equivalent) Replaceable by service tech.
Modeling Light Control
Off / Proportional / Free (full) 5.0-100%
Wireless Remote
Yes, via optional Air Remote TTL-C/N, Air remote, Air USB (Profoto Studio) Wireless range: Up to 1,000' (300 m) for normal triggering Up to 330' (100 m) for TTL with optional Air Remote TTL-C
Frequency Band
2.4 GHz
Triggering
Air radio slaves, optical (IR), sync cord
Operating Voltage
100-240VAC, 50/60Hz, Self-sensing 14.8VDC/3Ah via included, rechargeable battery
Auto Power Off
Yes, after 60 minutes of disuse Sleep mode after 30 minutes of disuse
Battery Type
Lithium-ion 220 Full power flashes Battery life: 300 charge cycles (to 80% left)
Flash Ready Indicator
Beep tone, ready right, modeling light dimming
Battery Charge Time
2.0 Hours with included 2.8V multi-voltage charger 1.0 Hour with optional 4.5V quick charger
Battery Charge Display
Green LED indicators: 3 Sections: 100-70% 2 Sections: 70-40% 1 Section: 40-10% 1 Section blinking < 10%
User Replaceable Flashtube
No, via authorized service tech.
Voltage Stabilization
Yes
Circuit Protection
Adaptive thermal control
Fan Cooled
Yes
Auto Dump
Yes
Operating Temperature
14 to +122°F (-10 to +50°C) Storage: 4 to +140°F (-20 to +60°C)
Dimensions
Length x diameter: Body only: 12.2 x 5.12 (310 x 130 mm) With 5/8" (16 mm) stand adapter: 12.2 x 6.69" (310 x 170 mm)
The user manual for the Profoto B1 500 Air Battery-Powered 2-Light Location Kit 901092 can be downloaded in .pdf
format if it did not come with your new monolight kits, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other Profoto users keep a unique electronic library
for Profoto monolight kitss,
where you can use our link to download the user manual for the Profoto B1 500 Air Battery-Powered 2-Light Location Kit 901092.
The user manual lists all of the functions of the Profoto B1 500 Air Battery-Powered 2-Light Location Kit 901092,
all the basic and advanced features and tells you how to use the monolight kits.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from Profoto service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the Profoto B1 500 Air Battery-Powered 2-Light Location Kit 901092. User manuals are also
available on the Profoto website under Lighting & Studio - Strobe Lighting - Monolight Kits.
Question and answer discussion forum concerning user instructions and resolving problems with the Profoto B1 500 Air Battery-Powered 2-Light Location Kit 901092 - no comments have been made yet - be the first to add a comment
Question and answer discussion forum concerning user instructions and resolving problems with the Profoto B1 500 Air Battery-Powered 2-Light Location Kit 901092 - no comments have been made yet - be the first to add a comment