User manual for Pulsar Quantum HD38S 32mm Thermal Monocular PL77311
- Manufacturer: Pulsar
- Basic description and contents of package
- Product classification: Optics - Night & Thermal Vision - Thermal Imagers
- Safety instructions
- Startup and operation of the thermal imagers
- Tips for setting up your Pulsar
- Settings and expert assistance
- Contact Pulsar service
- Warranty information
We recommend checking out our discussion threads on the Pulsar Quantum HD38S 32mm Thermal Monocular PL77311,
which address similar problems with connecting and setting up Thermal Imagers Pulsar.
User manual for the Pulsar Quantum HD38S 32mm Thermal Monocular PL77311
The user manual for the Pulsar Quantum HD38S 32mm Thermal Monocular PL77311 provides
necessary instructions for the proper use of the product Optics - Night & Thermal Vision - Thermal Imagers.
The black Quantum HD38S 32mm Thermal Monocular from Pulsar is intended for detection and monitoring of heat emanating from wildlife, game, animal stock, faulty wiring and piping, structural and insulation defects, running engines and human bodies. With this device you can see those heat sources through fog, smoke and haze. The monocular features a micro-bolometer sensor with a resolution of 384x288 pixels, and 7.7µm to 13.2µm spectral sensitivity. The produced video output has refresh rate of 30 Hz and can be viewed via a built-in 640x480 OLED display, and relayed to an external monitor or a recording device using a video port. The OLED display combines higher efficiency with lower power consumption, while delivering brighter and higher contrast images than a similar LCD display.
The optical system features a 32mm f/1.2 germanium lens. While opaque in the visible spectrum, the germanium lens has high transmission in the Long Infrared region, which makes it ideal for thermal imaging. The optical system provides a 2.1x optical zoom and allows for a wide angular field of view. If you need a close up of your target, the imager also has a digital zoom of 2x.
The housing is made of lightweight and durable glass-nylon composite and has a texture with coarse deep groves to allow a good grip. The housing is IPX4-rated for weather resistance from splashing water. The control buttons are arranged in a staggered configuration to for an easy reach and one-handed operation with either left or right hand. This thermal imager can also be mounted on a tripod via a top or a bottom 1/4"-20 sockets. Additionally, it has a Weaver style mount adapter for connecting accessories. The eyepiece has a diopter adjustment and a rubberized winged eye-cap. Also included, are a carrying case, a hand strap, a car adapter, an extra battery container, and a lens cloth.
If you own a Pulsar thermal imagers and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the Pulsar Quantum HD38S 32mm Thermal Monocular PL77311 in the following formats:
- *.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
Additional parameters of the Pulsar Quantum HD38S 32mm Thermal Monocular PL77311:
| Sensor || Microbolometer |
Resolution: 384x288 pixels
Spectral Range: 7.7 - 13.2 µm
Pixel pitch: 25 µm
| Detection Range || 1039 yd (950 m) |
| Display || Type: OLED |
Frame rate: 30 Hz
Resolution: 640x480 pixels
Format: PAL, NTSC
Connector: 3.5 mm jack
| Magnification || Optical: 2.1x |
Digital zoom: 4.2x
| Lens System || 32mm f/1.2 |
| Angular Field of View || Horizontal: 14.4° |
| Linear Field of View || Horizontal: 75' @ 100 yd (25 @ 100 m) |
Vertical: 57' @ 100 yd (19 @ 100 m)
| Minimum Focus Distance || 6.6' (2 m) |
| Eye Relief || 20 mm |
| Exit Pupil || 8 mm |
| Diopter Adjustment || ±5 |
| Battery / Runtime || 4 x AA / 5.5 hr max |
| External Power Supply || DC output 15V, 3W |
| Material of Construction || Glass-nylon composite |
| Tripod || 2 x 1/4"-20 |
| Mount || Weaver |
| Operating Temperature || -4 to 122°F (-20 to 50°C) |
| Weather Resistance || IPX4-rated |
| Dimensions || 7.9 x 3.4 x 2.3" (200 x 86 x 59 mm) |
| Weight || 12.3 oz (350 g) |
The user manual for the Pulsar Quantum HD38S 32mm Thermal Monocular PL77311 can be downloaded in .pdf
format if it did not come with your new thermal imagers, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other Pulsar users keep a unique electronic library
for Pulsar thermal imagerss,
where you can use our link to download the user manual for the Pulsar Quantum HD38S 32mm Thermal Monocular PL77311.
The user manual lists all of the functions of the Pulsar Quantum HD38S 32mm Thermal Monocular PL77311,
all the basic and advanced features and tells you how to use the thermal imagers.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from Pulsar service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the Pulsar Quantum HD38S 32mm Thermal Monocular PL77311. User manuals are also
available on the Pulsar website under Optics - Night & Thermal Vision - Thermal Imagers.
Question and answer discussion forum concerning user instructions and resolving problems with the Pulsar Quantum HD38S 32mm Thermal Monocular PL77311 - no comments have been made yet - be the first to add a comment
Post new comment/question/response regarding the Pulsar Quantum HD38S 32mm Thermal Monocular PL77311
Can't find what you're looking for? Try Google Search!|
|Uploaded instruction manuals