User manual QSC AcousticDesign AD-S4T 4" Two-Way Surface AD-S4T-WH
Operating instructions and pdf manual for use - QSC AcousticDesign AD-S4T 4" Two-Way Surface AD-S4T-WH User manual, User manual QSC AcousticDesign AD-S4T 4" Two-Way Surface AD-S4T-WH, QSC, AcousticDesign, AD-S4T, 4, Two-Way, Surface, AD-S4T-WH,
User manual for QSC AcousticDesign AD-S4T 4" Two-Way Surface AD-S4T-WH
Manufacturer: QSC
Basic description and contents of package
Product classification: Pro Audio - Installation Sound - Install Speakers
Safety instructions
Startup and operation of the install speakers
Tips for setting up your QSC
Settings and expert assistance
Contact QSC service
Troubleshooting
Warranty information
Price: 165 USD
Click to enlarge image
We recommend checking out our discussion threads on the QSC AcousticDesign AD-S4T 4" Two-Way Surface AD-S4T-WH,
which address similar problems with connecting and setting up Install Speakers QSC.
User manual for the QSC AcousticDesign AD-S4T 4" Two-Way Surface AD-S4T-WH
The user manual for the QSC AcousticDesign AD-S4T 4" Two-Way Surface AD-S4T-WH provides
necessary instructions for the proper use of the product Pro Audio - Installation Sound - Install Speakers.
The white QSC AcousticDesign AD-S4T Loudspeaker is a surface mounted 70/100V, 4" two-way loudspeaker system, ideally suited for a wide variety of foreground and background sound reinforcement applications. The AD-S4T features a high-quality 4" weather-treated paper cone woofer on a 1" voice coil. It also has a 0.75" silk dome tweeter with a 0.75" voice coil. The consistent and even 120° axisymmetric (conical) coverage is achieved through DMT (Directivity Matched Transition), which matches the directivity patterns of the woofer and the high-frequency waveguide at the crossover point. The even and accurate frequency response of the AD-S4T is maintained even in 70/100V applications by use of a low-loss, low-saturation 30W transformer with selectable taps, including an 8-ohm bypass. The rotary selector is located on the back of the enclosure, protected by a weather grommet. Featuring a rugged ABS enclosure, sealed input panel cover, and powder-coated aluminum grille, the AcousticDesign surface-mounted speaker exceeds IEC60529 IP-54 ratings for dust and splash resistance.
If you own a QSC install speakers and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the QSC AcousticDesign AD-S4T 4" Two-Way Surface AD-S4T-WH in the following formats:
*.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
Additional parameters of the QSC AcousticDesign AD-S4T 4" Two-Way Surface AD-S4T-WH:
Frequency Range
68 Hz to 20 kHz
Free-field, -10 dB from on-axis sensitivity
Noise Rating
Power: 50 W Voltage: 20 V rms
IEC60268-1 noise signal for 2 hours
Sensitivity
Broadband: 87 dB SPL
On-Axis, free-field sensitivity, 2.83 V, 3.3' (1 m)
Coverage Angle
At -6 dB: 120° (500 Hz to 5 kHz)
Directivity Factor
6
Directivity Index
8 dB
Maximum SPL
Continuous: 104 dB Peak: 110 dB
Calculated from rated noise voltage and sensitivity
Rated Impedance
8 ohms
Transformer Taps
70 V: 30, 15, 7.5, 3.75 W and 8-ohm bypass 100 V: 30, 15, 7.5 W and 8-ohm bypass
Salt Fog: MIL-STD-810G Method 509.5 for 100 hours Humidity: MIL-STD-810G Method 507.5, Natural cycle B2, cyclic high RH for 7 days High and Low Temperature: Tested to QSC internal standards between -4 to 122°F (-20 to 50°C)
Operating Temperature
-4 to 122°F (-20 to 50°C)
Dimensions
10.27 x 6.34 x 6.42" (261 x 161 x 163 mm)
Weight
6.5 lb (2.9 kg)
The user manual for the QSC AcousticDesign AD-S4T 4" Two-Way Surface AD-S4T-WH can be downloaded in .pdf
format if it did not come with your new install speakers, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other QSC users keep a unique electronic library
for QSC install speakerss,
where you can use our link to download the user manual for the QSC AcousticDesign AD-S4T 4" Two-Way Surface AD-S4T-WH.
The user manual lists all of the functions of the QSC AcousticDesign AD-S4T 4" Two-Way Surface AD-S4T-WH,
all the basic and advanced features and tells you how to use the install speakers.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from QSC service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the QSC AcousticDesign AD-S4T 4" Two-Way Surface AD-S4T-WH. User manuals are also
available on the QSC website under Pro Audio - Installation Sound - Install Speakers.
Question and answer discussion forum concerning user instructions and resolving problems with the QSC AcousticDesign AD-S4T 4" Two-Way Surface AD-S4T-WH - no comments have been made yet - be the first to add a comment
Question and answer discussion forum concerning user instructions and resolving problems with the QSC AcousticDesign AD-S4T 4" Two-Way Surface AD-S4T-WH - no comments have been made yet - be the first to add a comment