|
User manual for QSC RMX4050a 2000W Professional Low-Z Power Amplifier RMX4050A
- Manufacturer: QSC
- Basic description and contents of package
- Product classification: Pro Audio - Live Sound - Power Amplifiers
- Safety instructions
- Startup and operation of the power amplifiers
- Tips for setting up your QSC
- Settings and expert assistance
- Contact QSC service
- Troubleshooting
- Warranty information
|
We recommend checking out our discussion threads on the QSC RMX4050a 2000W Professional Low-Z Power Amplifier RMX4050A,
which address similar problems with connecting and setting up Power Amplifiers QSC.
|
User manual for the QSC RMX4050a 2000W Professional Low-Z Power Amplifier RMX4050A
The user manual for the QSC RMX4050a 2000W Professional Low-Z Power Amplifier RMX4050A provides
necessary instructions for the proper use of the product Pro Audio - Live Sound - Power Amplifiers.
The QSC RMX4050a 2000W Professional Low-Z Power Amplifier is a 3RU unit designed for high power live sound reinforcement applications. The amplifier features both XLR and 1/4" balanced inputs as well as Speakon and touch-proof binding post output connectors. The integrated user-defeatable clip limiters and selectable low-frequency filters allow you to adjust the amplifier to your application.
The amplifier is rated at 850W per channel at 8Ω from 20 to 20,000 Hz, 1400W per channel at 4Ω from 20 to 20,000 Hz, 2000W per channel at 2Ω from 20 to 20,000 Hz, and 2800W in bridge mono mode at 8Ω from 20 to 20,000 Hz.
This unit is less than 16" deep and features a three-tier Class H output circuit design for efficient power management. As a result, less AC current is wasted and more available current is utilized for amplification.
|
If you own a QSC power amplifiers and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the QSC RMX4050a 2000W Professional Low-Z Power Amplifier RMX4050A in the following formats:
- *.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
|
Additional parameters of the QSC RMX4050a 2000W Professional Low-Z Power Amplifier RMX4050A:
Connectors | Input (active balanced): 2 x 3-pin Euro-style detachable terminal block 2 x 3-Pin XLR (pin 2+)
Output: 2 x touch-proof binding posts 2 x Neutrik Speakon connectors | Stereo FTC Power | 8Ω / FTC 20 to 20,000 Hz / 0.1% THD: 800 W (650 W @ 1 1.0 kHz sine wave, 1% THD, 1 channel driven) 8Ω / EIA 1,000 Hz / 0.1% THD: 850 W 4Ω / FTC 20 to 20,000 Hz / 0.1% THD: 1300 W 4Ω / EIA 1,000 Hz / 0.1% THD: 1400 W 2Ω / FTC 20 to 20,000 Hz / 1% THD: 1600 W 2Ω / EIA 1,000 Hz / 1% THD: 2000 W | Bridge | 8Ω / FTC 20 to 20,000 Hz / 0.1% THD: 2600 W 8Ω / EIA 1 kHz / 0.1% THD: 2800 W 4Ω / EIA 1 kHz / 1% THD: 4000 W | Signal to Noise Ratio | > - 100 dB (20 to 20,000 Hz at 8 Ω) | Distortion | SMPTE-M: < 0.02% Typical: 20 Hz to 20 kHz 10 dB below rated power < 0.02% THD / 4 Ω and 8 Ω 1.0 kHz and below full rated power 0.02% THD / 4 Ω and 8 Ω | Input Sensitivity @ 8 ohms | 1.42 V (5.3 dBu) | Voltage Gain | 64x (36 dB) | Output Circuit | 3-tier Class H | Power Requirements | Typical, 1/8 Power Pink Noise at 4Ω: 10.0 A Severe, 1/3 Power Pink Noise at 4Ω: 20.1 A | Plug Type | Supplied: NEMA 5-15 (100 / 120 V) CEE7/7 (230 V) | Frequency Response | 20 Hz to 20 kHz: 0/-1 dB -3 dB Points: 5 Hz and 50 kHz (LF filter bypassed / 8 Ω) | Damping Factor | > 250 at 8Ω (1,000 Hz and below) | Input Impedance | 10 kΩ unbalanced / 20 kΩ balanced | Input Clipping Level | 6.4 Vrms (+18 dBu) | Cooling | Continuously variable speed fan, back-to-front air flow | Controls | Front: AC switch / channel 1 & 2 gain knobs Rear: 10-position DIP switch | Indicators | Power-On: Green LED Signal: Yellow LED (1 per channel) Clip: Red LED (1 per channel) Protect: Red LED | Protection | Amplifier: Stable into reactive or mismatched loads Load: On/off muting, Triac crowbar on each channel | Current Consumption | @ 120 V
2Ω Typical: 14.5 A, Full: 30.6 A, Maximum: 65.7 A
4Ω Typical: 10.0 A, Full: 20.1 A, Maximum: 42.2 A
8Ω Typical: 6.4 A, Full: 12.5 A, Maximum: 25.5 A | Power Requirement | 100, 120, 230 VAC, 50 to 60 Hz (factory configured) | Dimensions (H x W x D) | 5.2 x 19.0 x 15.9" (132.0 x 483.0 x 404.0 mm) | Weight | 68.0 lb (30.8 kg) | Package Weight | 79.8 lb | Box Dimensions (LxWxH) | 23.858 x 21.811 x 8.189" | |
The user manual for the QSC RMX4050a 2000W Professional Low-Z Power Amplifier RMX4050A can be downloaded in .pdf
format if it did not come with your new power amplifiers, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other QSC users keep a unique electronic library
for QSC power amplifierss,
where you can use our link to download the user manual for the QSC RMX4050a 2000W Professional Low-Z Power Amplifier RMX4050A.
The user manual lists all of the functions of the QSC RMX4050a 2000W Professional Low-Z Power Amplifier RMX4050A,
all the basic and advanced features and tells you how to use the power amplifiers.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from QSC service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the QSC RMX4050a 2000W Professional Low-Z Power Amplifier RMX4050A. User manuals are also
available on the QSC website under Pro Audio - Live Sound - Power Amplifiers.
Question and answer discussion forum concerning user instructions and resolving problems with the QSC RMX4050a 2000W Professional Low-Z Power Amplifier RMX4050A - no comments have been made yet - be the first to add a comment
Post new comment/question/response regarding the QSC RMX4050a 2000W Professional Low-Z Power Amplifier RMX4050A
|
|
|
|
|