User manual RDL HD-MA 35A 35 Watt Mixer Amplifier with Power Supply HD-MA35A
Operating instructions and pdf manual for use - RDL HD-MA 35A 35 Watt Mixer Amplifier with Power Supply HD-MA35A User manual, User manual RDL HD-MA 35A 35 Watt Mixer Amplifier with Power Supply HD-MA35A, RDL, HD-MA, 35A, 35, Watt, Mixer, Amplifier,
User manual for RDL HD-MA 35A 35 Watt Mixer Amplifier with Power Supply HD-MA35A
Manufacturer: RDL
Basic description and contents of package
Product classification: Pro Audio - Installation Sound - Mixer/Amplifiers
Safety instructions
Startup and operation of the mixer/amplifiers
Tips for setting up your RDL
Settings and expert assistance
Contact RDL service
Troubleshooting
Warranty information
Price: 260 USD
We recommend checking out our discussion threads on the RDL HD-MA 35A 35 Watt Mixer Amplifier with Power Supply HD-MA35A,
which address similar problems with connecting and setting up Mixer/Amplifiers RDL.
User manual for the RDL HD-MA 35A 35 Watt Mixer Amplifier with Power Supply HD-MA35A
The user manual for the RDL HD-MA 35A 35 Watt Mixer Amplifier with Power Supply HD-MA35A provides
necessary instructions for the proper use of the product Pro Audio - Installation Sound - Mixer/Amplifiers.
The RDL HD-MA35A 35 Watt Remote Mixer Amplifier is a versatile audio amplifier, mixer and paging system targeted for background music, call on-hold music, and commercial audio applications. The amplifier features two zones with Zone 1 delivering 35 watts and support for balanced and unbalanced inputs. This output provides a constant voltage (25 V, 70 V or 100 V). Zone 2 is reserved for an 8 ohm speaker or 600 ohm telephone equipment, and capable of 4 watts.
If you own a RDL mixer/amplifiers and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the RDL HD-MA 35A 35 Watt Mixer Amplifier with Power Supply HD-MA35A in the following formats:
*.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
Additional parameters of the RDL HD-MA 35A 35 Watt Mixer Amplifier with Power Supply HD-MA35A:
Specifications
Amplifier
Zone 1 (Main): 35 W RMS, front-panel mixer (user controls) Zone 2: 2 W RMS (8 Ohms), rear-panel mixer (trimmers)
Audio Inputs
Balanced, mic or line switch selectable on terminal block; 2, unbalanced stereo summing inputs on RCA jacks
Maximum Input Level
Mic input: -11.5 dBu; Balanced line input: + 19 dBu; Unbalanced Inputs: + 9 dBV (+15.5 dBV, one input); (for 1% THD+N at output)
Phantom Power
24VDC (IEC 1938: 1996-12), switch-selectable for the mic input
Attenuation / Gain
Ducking/Muting Actuation: Automatic (Input 1 VOX: rear-panel adjustable signal threshold with LED indicator) or Manual (contact closure to ground) Ducking/Muting Release Delay: 4 seconds, nominal Ducking/Muting: Switch-selectable for inputs 2 and/or 3, 25 dB ducking attenuation, nominal
Power
24VDC, 100 mA maximum, ground-referenced Power Supply (included): 100 to 240 Vac, 50-60 Hz, 50 W; 24VDC output to amplifier chassis
Input Level
(to cross compressor threshold equaling 23 W amplified output) Mic input: -50 dBu (2.5 mV), (front panel gain at max.) Balanced line input: -21 dBu (70 mV), (front panel gain at max.) Unbalanced Inputs: -15 dBV (180 mV, front panel gain at max., both inputs driven)
Noise
Noise (line output): Mic input: -68 dB, Balanced line input: -72 dB (below compressor threshold at max gain); Unbalanced inputs: <-85 db (max gain) Noise (amplified outputs): Mic input: -68 dB, Balanced line input: -72 dB (below compressor threshold at max gain); Unbalanced inputs: <-75 dB (max gain)
THD
< 0.5% (1 kHz at compressor threshold, main amp output); < 0.25% (line output, main)
CMRR
> 50 dB (50 Hz to 120 Hz); Balanced line input: > 80 dB (50 Hz to 120 Hz, transformer-coupled input)
Compressor
Threshold 2 dB below rated output, automatically adjusting attack and release times
Frequency Response
Frequency response (mixer): Mic to line output: ±1.5 dB (40 Hz to 25 kHz); Balanced line input to line output: ±1 dB (20 Hz to 20 kHz); Unbalanced line input to line output: ±0.5 dB (20 Hz to 20 kHz) Frequency Response (Zone 1 amplifier): ±1 dB (50 Hz to 20 kHz) Frequency Response (Zone 2 amplifier): 8 Ohm: ±1.5 dB (50 Hz to 20 kHz); 600 Ohm: ±1.5 dB (30 Hz to 18 kHz)
Tone Controls
±10 dB @ 10 kHz, ±9 dB @ 100 Hz (front-panel) with center detent
Power Amplifier Outputs (2): Zone 1 (main, <1% THD+N): 35 W RMS (4 Ohms), 32 W (8 Ohms) on detachable terminal block (switch-selectable 4 or 8 Ohm impedance); Zone 2: 2 W (8 Ohms, on detachable terminal block)
Indicators
Front-panel: Signal present (3; 1 per input, green), Compressor activity (red), Power (bright=on, dim=standby, blue); Rear-panel: Ducking/muting threshold (yellow)
Controls
Front-panel controls (6): Zone 1 (main) mixer level controls (3, inputs 1 through 3), EQ (2, bass and treble), Power (latching pushbutton, on/standby) Rear-panel controls (9): Mic/Line switch (Input 1), Input 1 ducking/muting detector sensitivity trimmer, Phantom voltage switch (Input 1), Ducking control switches (2, to duck inputs 2 and/or 3), Zone 2 mixer level controls (3, inputs 1 through 3), HD-MA35: Output impedance switch 4 or 8 Ohms
Temperature
32° F to 122° F Maximum; 68° F Recommended (0° C to 50° C Maximum; 20° C Recommended)
The user manual for the RDL HD-MA 35A 35 Watt Mixer Amplifier with Power Supply HD-MA35A can be downloaded in .pdf
format if it did not come with your new mixer/amplifiers, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other RDL users keep a unique electronic library
for RDL mixer/amplifierss,
where you can use our link to download the user manual for the RDL HD-MA 35A 35 Watt Mixer Amplifier with Power Supply HD-MA35A.
The user manual lists all of the functions of the RDL HD-MA 35A 35 Watt Mixer Amplifier with Power Supply HD-MA35A,
all the basic and advanced features and tells you how to use the mixer/amplifiers.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from RDL service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the RDL HD-MA 35A 35 Watt Mixer Amplifier with Power Supply HD-MA35A. User manuals are also
available on the RDL website under Pro Audio - Installation Sound - Mixer/Amplifiers.
Question and answer discussion forum concerning user instructions and resolving problems with the RDL HD-MA 35A 35 Watt Mixer Amplifier with Power Supply HD-MA35A - no comments have been made yet - be the first to add a comment
Why is the blue light (wireless symbol)...what is it on...its a blue light. I have had these for years and have never had that light come on and it is not allowing me to print! What do I do to turn it off? ...K&M manual - K&M 200 Telescoping Microphone Stand (Black) 20000-500-55 Posted by: jpdaval69 2024-09-10 00:50:11
I need the service manual/schematic of Universal Audio Solo/610 Serial number: 2310 MfgDt: 0607.
I hope you have it and I'm willing to be charged for it.
Best Regards....True Dock not recognizing hard drives - Kingwin True Dock Super-Speed USB 3.0 to TD-2535U3 Posted by: bf1955 2024-08-22 15:34:26
True Dock is not recognizing HDD, the HDD light does not come on, even though the power light does come one....