User manual for RDL ST-CL2 Compressor/Limiter ST-CL2
- Manufacturer: RDL
- Basic description and contents of package
- Product classification: Pro Audio - Recording - Dynamics Processors
- Safety instructions
- Startup and operation of the dynamics processors
- Tips for setting up your RDL
- Settings and expert assistance
- Contact RDL service
- Troubleshooting
- Warranty information
- Price: 136 USD
|
We recommend checking out our discussion threads on the RDL ST-CL2 Compressor/Limiter ST-CL2,
which address similar problems with connecting and setting up Dynamics Processors RDL.
|
User manual for the RDL ST-CL2 Compressor/Limiter ST-CL2
The user manual for the RDL ST-CL2 Compressor/Limiter ST-CL2 provides
necessary instructions for the proper use of the product Pro Audio - Recording - Dynamics Processors.
The ST-CL2 is a miniature wall and surface mount, high performance compressor/limiter from RDL, designed to maintain a constant average output level and effective peak control over a wide range of input levels. The input and output are line level and each may be wired balanced or unbalanced.
|
If you own a RDL dynamics processors and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the RDL ST-CL2 Compressor/Limiter ST-CL2 in the following formats:
- *.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
|
Additional parameters of the RDL ST-CL2 Compressor/Limiter ST-CL2:
| Function | Compressor/Limiter | | Number of Channels | Single | | Inputs | Screw terminal | | Outputs | Screw terminal | | Maximum Input Level | +22dBu | | Compression Threshold | Program dependent | | Compression Ratio | Automatically adjusting 1.5:1 to 10:1 | | Attack Time | Averaging Compressor: 500 mSec (+4dBu input)
Fast Compression: <10 msec (+20dbu input)
Peak Limiting: Instantaneous | | Release Time | Automatically adjusting up to 500 mSec | | Gate Threshold | Not applicable | | Gate Rate | Not applicable | | Maximum Output Level | Not specified by manufacturer | | Make-up Gain | Automatically maintains a constant average output level | | Frequency Response | 10Hz to 20kHz (+/-0.2dB) over full compression range | | Dynamic Range | Not specified by manufacturer | | Noise | <-78dB, unweighted - +4dBu input/output | | Dimensions | Not specified by manufacturer | | Specialties | Requires ground-referenced, 24 to 33Vdc @ 50mA power source | | Package Weight | 0.2 lb | | Box Dimensions (LxWxH) | 4.1 x 2.1 x 2.0" | |
The user manual for the RDL ST-CL2 Compressor/Limiter ST-CL2 can be downloaded in .pdf
format if it did not come with your new dynamics processors, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other RDL users keep a unique electronic library
for RDL dynamics processorss,
where you can use our link to download the user manual for the RDL ST-CL2 Compressor/Limiter ST-CL2.
The user manual lists all of the functions of the RDL ST-CL2 Compressor/Limiter ST-CL2,
all the basic and advanced features and tells you how to use the dynamics processors.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from RDL service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the RDL ST-CL2 Compressor/Limiter ST-CL2. User manuals are also
available on the RDL website under Pro Audio - Recording - Dynamics Processors.
Question and answer discussion forum concerning user instructions and resolving problems with the RDL ST-CL2 Compressor/Limiter ST-CL2 - no comments have been made yet - be the first to add a comment
Post new comment/question/response regarding the RDL ST-CL2 Compressor/Limiter ST-CL2
|
|
