User manual for RDL ST-RX2 - 1x2 Audio Routing Switch ST-RX2
- Manufacturer: RDL
- Basic description and contents of package
- Product classification: Pro Audio - In-Line Problem Solvers - Splitters & Combiners
- Safety instructions
- Startup and operation of the splitters & combiners
- Tips for setting up your RDL
- Settings and expert assistance
- Contact RDL service
- Troubleshooting
- Warranty information
- Price: 101 USD
|
We recommend checking out our discussion threads on the RDL ST-RX2 - 1x2 Audio Routing Switch ST-RX2,
which address similar problems with connecting and setting up Splitters & Combiners RDL.
|
User manual for the RDL ST-RX2 - 1x2 Audio Routing Switch ST-RX2
The user manual for the RDL ST-RX2 - 1x2 Audio Routing Switch ST-RX2 provides
necessary instructions for the proper use of the product Pro Audio - In-Line Problem Solvers - Splitters & Combiners.
The ST-RX2 is a one-in, two-out line-level routing switch and a part of the "Stick-On" line from RDL. Anywhere you need to send an audio signal to one of two destinations, the ST-RX2 is an ideal companion. It offers solid-state switching to route the signal to one of the balanced outputs with an off attenuation better than 80dB at all frequencies; no relays or mechanical devices are used.
The ST-RX2 uses soft switching to eliminate any clicks or pops. The unit can be controlled by almost any source from switches to logic circuits thanks to its minimal required control current. It may also be controlled by the RC2-ST, RT2 or RUC-4 remote controls from RDL.
|
If you own a RDL splitters & combiners and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the RDL ST-RX2 - 1x2 Audio Routing Switch ST-RX2 in the following formats:
- *.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
|
Additional parameters of the RDL ST-RX2 - 1x2 Audio Routing Switch ST-RX2:
Switching Time | Normal Output Off: 10 us (Fast) 5 ms (Soft) Normal Output On: 15 us (Fast) 70 ms (Soft) Select Output Off: 15 us (Fast) 10 ms (Soft) Select Output On: 20 us (Fast) 35 ms (Soft) | Control Signal | "Trig" Terminal Must be Externally Connected to Ground | Control Current | 0.5mA | Headroom | > 18dB (Above +4 dBu) | THD + N | < 0.03% (1kHz) | Common Mode Rejection Ratio | > 45dB (100Hz) | Frequency Response | 15Hz to 20kHz (+/- 0.5dB into 10 k ohms Bridging Input) 30Hz to 20kHz (+/- 0.5dB into 600 ohms) | Noise | < -85dB (Below +4 dBu Unweighted) -90dB (Typical) | On Gain | Unity (Balanced Input and Output) | Off Attenuation | > 80dB (Either Output) > 95dB at 1kHz | Indicators | 2 x Output LEDs | Power Requirements | 24 to 33 VDC @ 40mA (Ground-Referenced) | Dimensions (HxWxD) | 1.55 x 3 x 0.65" (39 x 76 x 17 mm) | Package Weight | 0.75 lb | Box Dimensions (LxWxH) | 16.0 x 11.6 x 2.9" | |
The user manual for the RDL ST-RX2 - 1x2 Audio Routing Switch ST-RX2 can be downloaded in .pdf
format if it did not come with your new splitters & combiners, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other RDL users keep a unique electronic library
for RDL splitters & combinerss,
where you can use our link to download the user manual for the RDL ST-RX2 - 1x2 Audio Routing Switch ST-RX2.
The user manual lists all of the functions of the RDL ST-RX2 - 1x2 Audio Routing Switch ST-RX2,
all the basic and advanced features and tells you how to use the splitters & combiners.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from RDL service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the RDL ST-RX2 - 1x2 Audio Routing Switch ST-RX2. User manuals are also
available on the RDL website under Pro Audio - In-Line Problem Solvers - Splitters & Combiners.
Question and answer discussion forum concerning user instructions and resolving problems with the RDL ST-RX2 - 1x2 Audio Routing Switch ST-RX2 - no comments have been made yet - be the first to add a comment
Post new comment/question/response regarding the RDL ST-RX2 - 1x2 Audio Routing Switch ST-RX2
|
|