|
User manual for RME Wired Advanced Remote Control ARC
- Manufacturer: RME
- Basic description and contents of package
- Product classification: Pro Audio - Computer Audio - Accessories
- Safety instructions
- Startup and operation of the accessories
- Tips for setting up your RME
- Settings and expert assistance
- Contact RME service
- Troubleshooting
- Warranty information
- Price: 229 USD
|
We recommend checking out our discussion threads on the RME Wired Advanced Remote Control ARC,
which address similar problems with connecting and setting up Accessories RME.
|
User manual for the RME Wired Advanced Remote Control ARC
The user manual for the RME Wired Advanced Remote Control ARC provides
necessary instructions for the proper use of the product Pro Audio - Computer Audio - Accessories.
This RME Wired Advanced Remote Control is designed for direct access to frequently used actions and commands required in a studio's daily work. Its flexible configuration through TotalMix FX DSP-Based Mixer will simplify the workflow and increase the usability of the RME interface in any real world situation.
The ARC (Advanced Remote Control) can be used with all Fireface UCX USB and FireWire Audio Interface. It consists of a solid metal case with a main encoder dial. The remote control connects to the main interface via a 16.4' (5m) cable and a special connector at the back of both units. The top of the ARC features a rotary encoder with push switch function, 2 lower buttons, and 6 upper buttons with status LEDs. The rotary encoder is used to change various parameters like gain and volume. The left button Prog is programmable and can perform several functions. The same is true for the upper 6 buttons, which also include a status LED to signal the current state.
The remote control provides default settings for the 7 programmable buttons, but can be freely configured via the key commands dialog of TotalMix FX DSP-Based Mixer. All buttons can be assigned to more than 36 different commands. The behavior of each individual button can be changed between push, toggle, enable, and disable, depending on the base function. In stand-alone mode of Fireface UCX and UFX USB and FireWire Audio Interfaces, there is no TotalMix FX DSP-Based Mixer on the host computer. Therefore the settings for the ARC are no longer available. Instead a fixed set of functions is activated including Turn Encoder (main out volume), Push-on Encoder (dim for main out), Recall button (recall function for main out), Prog (no function), and Buttons A to F (load setup 1 to 6).
Available commands / actions include main volume, global mute, global solo, mute group 1 to 4, solo group 1 to 4, fader group 1 to 4, link main AB, speaker B select, DIM (main out), mute (main out), mute fx (main out), mono (main out), external input, reverb, echo, cue phones 1 to 4, snapshot 1 to 8, microphone gains, inst. gains, volume phones, etc.
Several functions can be activated at the same time. For example, Button A is set to Cue Phones 1; this means that the phones sub-mix is heard via the main output (the studio monitors). Now, to be able to also change the volume of the phones sub-mix itself, set button B to Volume Phones 1. Activating both will allow you to listen to the phones sub-mix via the main output, and also to change its volume (the fader in the third row) by turning the encoder knob.
|
If you own a RME accessories and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the RME Wired Advanced Remote Control ARC in the following formats:
- *.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
|
Additional parameters of the RME Wired Advanced Remote Control ARC:
| Supported Interfaces | Fireface UFX and UCX USB and FireWire Audio Interface | | Package Weight | 2.1 lb | | Box Dimensions (LxWxH) | 9.7 x 6.7 x 3.3" | |
The user manual for the RME Wired Advanced Remote Control ARC can be downloaded in .pdf
format if it did not come with your new accessories, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other RME users keep a unique electronic library
for RME accessoriess,
where you can use our link to download the user manual for the RME Wired Advanced Remote Control ARC.
The user manual lists all of the functions of the RME Wired Advanced Remote Control ARC,
all the basic and advanced features and tells you how to use the accessories.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from RME service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the RME Wired Advanced Remote Control ARC. User manuals are also
available on the RME website under Pro Audio - Computer Audio - Accessories.
Question and answer discussion forum concerning user instructions and resolving problems with the RME Wired Advanced Remote Control ARC - no comments have been made yet - be the first to add a comment
Post new comment/question/response regarding the RME Wired Advanced Remote Control ARC
|
|
|
|
|
