|
User manual for Rupert Neve Designs Portico 5012V Duo Mic Preamplifier 5012-V
- Manufacturer: Rupert Neve Designs
- Basic description and contents of package
- Product classification: Pro Audio - Recording - Microphone Preamps
- Safety instructions
- Startup and operation of the microphone preamps
- Tips for setting up your Rupert Neve Designs
- Settings and expert assistance
- Contact Rupert Neve Designs service
- Troubleshooting
- Warranty information
|
We recommend checking out our discussion threads on the Rupert Neve Designs Portico 5012V Duo Mic Preamplifier 5012-V,
which address similar problems with connecting and setting up Microphone Preamps Rupert Neve Designs.
|
User manual for the Rupert Neve Designs Portico 5012V Duo Mic Preamplifier 5012-V
The user manual for the Rupert Neve Designs Portico 5012V Duo Mic Preamplifier 5012-V provides
necessary instructions for the proper use of the product Pro Audio - Recording - Microphone Preamps.
The vertical Rupert Neve Designs 5012 Duo Mic Preamplifier is a dual-channel microphone pre-amplifier built with Rupert Neve's custom input and output transformer circuits. The pre-amplifier is electronically balanced and designed to minimize the effects of hum, radio interference, and other dissonant noise from altering your sound. The vertical version of this module is a half-rack unit intended to be mounted in a small vertical rack or a bracket or tray that is itself mounted in a conventional 19" horizontal rack.
The microphone inputs use a transformer-like-amplifier chip and a toroidal Common Mode Rejection low-pass filter to reject frequencies above 150,000 Hz. This prevents odd high-frequency harmonics from altering the sound quality of your recording signal chain. After the high-frequency rejection stage, the pre-amp uses an input transformer that provides +25 dBu of input signal at unity gain without the need for a pad. The combination of an electronically balanced circuit with a true transformer amplifier stage allows the device to retain the Rupert Neve's sound in a small form factor.
The back panel of the device features an XLR input for channels A and B, an XLR output for each channel, and 4 x 1/4" TRS connectors for connecting Portico bussing modules to the signal chain.
|
If you own a Rupert Neve Designs microphone preamps and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the Rupert Neve Designs Portico 5012V Duo Mic Preamplifier 5012-V in the following formats:
- *.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
|
Additional parameters of the Rupert Neve Designs Portico 5012V Duo Mic Preamplifier 5012-V:
| Connectors | 2 x balanced XLR microphone connectors
2 x balanced XLR connectors
4 x 1/4" TRS bussing module connectors | | Frequency Response | Main Output, no load
-0.2 dB at 10 Hz
-3 dB at 160,000 Hz
Buss output measured at the 5014 monitor Buss-Mix Amplifier Output
-0.2 dB at 10 Hz
-3 dB at 160,000 Hz | | Noise | Measured at Main Output, unweighted, 22 to 22,000 Hz
Terminated 150Ω
With gain at unity: better than -100 dBu
With gain at 66 dB: better than -62 dBu
Equivalent Input Noise: better than -128 dBu
Noise Factor: 1.5 dB | | High-Pass Filter | Continuously variable swept frequency from 20 to 250 Hz
Slope: 12 dB/octave | | Gain | Unity to 66 dB in 6 dB steps
Trim continuously adjustable from -6 to 6 dB | | Buss I/O | Output is designed to feed the 5014 Monitor Buss mix amplifier at the internal system level of -2.5 dBu
Output level of the 5014 is equal to that of the 5012 | | Maximum Output Level | Maximum Output from 20 to 40,000 Hz: 25 dBu | | Mute | Mutes main output only | | Total Harmonic Distortion/Noise | At 1,000 Hz: 20 dBu output
Main Output: better than 0.001%
Buss Output measured at the 5014 monitor buss-mix amplifier output: better than 0.002%
At 20 Hz, 20 dBu output
Main Output: better than 0.002%
Silk Engaged: better than 0.2% second harmonic | | Crosstalk | Measured channel to channel: better than -90 dB at 15,000 Hz | | Phantom Power | +48 VDC ±1% | | Power Requirements | Voltage range: 9 to 18 VDC
Current Consumption:
At 9 VDC, current is 1.3 A typical: Power= 11.7W
At 12 VDC, current is 1.0 A typical: Power= 12.0W
At 15VDC, current is 0.8 A typical: Power= 12.0W
At 18VDC, current is 0.65 A typical: Power= 11.7W | | Dimensions (LxHxD) | 9 x 1.75 x 8.5" (22.86 x 4.45 x 21.6 cm) | | Weight | 8 lb (3.6 kg) | |
The user manual for the Rupert Neve Designs Portico 5012V Duo Mic Preamplifier 5012-V can be downloaded in .pdf
format if it did not come with your new microphone preamps, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other Rupert Neve Designs users keep a unique electronic library
for Rupert Neve Designs microphone preampss,
where you can use our link to download the user manual for the Rupert Neve Designs Portico 5012V Duo Mic Preamplifier 5012-V.
The user manual lists all of the functions of the Rupert Neve Designs Portico 5012V Duo Mic Preamplifier 5012-V,
all the basic and advanced features and tells you how to use the microphone preamps.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from Rupert Neve Designs service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the Rupert Neve Designs Portico 5012V Duo Mic Preamplifier 5012-V. User manuals are also
available on the Rupert Neve Designs website under Pro Audio - Recording - Microphone Preamps.
Question and answer discussion forum concerning user instructions and resolving problems with the Rupert Neve Designs Portico 5012V Duo Mic Preamplifier 5012-V - no comments have been made yet - be the first to add a comment
Post new comment/question/response regarding the Rupert Neve Designs Portico 5012V Duo Mic Preamplifier 5012-V
|
|
|
|
|
