|
User manual for Samson SXD3000 Power Amplifier with DSP SXD3000
- Manufacturer: Samson
- Basic description and contents of package
- Product classification: Pro Audio - Live Sound - Power Amplifiers
- Safety instructions
- Startup and operation of the power amplifiers
- Tips for setting up your Samson
- Settings and expert assistance
- Contact Samson service
- Troubleshooting
- Warranty information
- Price: 350 USD
|
We recommend checking out our discussion threads on the Samson SXD3000 Power Amplifier with DSP SXD3000,
which address similar problems with connecting and setting up Power Amplifiers Samson.
|
User manual for the Samson SXD3000 Power Amplifier with DSP SXD3000
The user manual for the Samson SXD3000 Power Amplifier with DSP SXD3000 provides
necessary instructions for the proper use of the product Pro Audio - Live Sound - Power Amplifiers.
The SXD3000 Power Amplifier with DSP by Samson is for live sound reinforcement. It is used in various environments in audio applications to provide clean power for speakers such as in DJ setups, houses of worship, front of house, live stage performance and more. It features 450W power per side at 4 Ω. This amp is designed to provide clean output with low distortion and a wide dynamic range over a frequency spectrum of 20 Hz to 20 kHz.
|
If you own a Samson power amplifiers and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the Samson SXD3000 Power Amplifier with DSP SXD3000 in the following formats:
- *.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
|
Additional parameters of the Samson SXD3000 Power Amplifier with DSP SXD3000:
| Rated Power Output | Stereo Both Channels Driven:
8 Ω 300 W
4 Ω 450 W | | Signal to Noise Ratio | 20 Hz to 20 kHz: >100 dB | | Distortion | SMPTE-IM: 0.02% | | Input Sensitivity | At 8 Ω Voltage Gain: 5 dBu | | Voltage Gain | 30 dB | | Output Circuit | Class AB | | Current Consumption | 115 VAC:
At 1/8 Rated Power 4 Ω: 4.5 A
At 1/3 Rated Power 4 Ω: 7.2 A
At Rated Power 4 Ω, Max: 10 A | | Distortion | Typical @ 4 Ω:
20 Hz to 20 kHz, 10 dB Below Rated Power: 0.002 %
1 kHz, Rated Power: 1 % | | Frequency Response | At 8 Ω 1 W, 0/-1 dB: 20 Hz to 20 kHz | | Damping Factor | 400 Hz: 120 | | Input Impedance | 20 kΩ balanced | | Input Clipping Level | 10 Vrms (22 dBu) | | Cooling | Continuously variable speed fan cooling | | Connector | Inputs: 2 x 3-pin XLR
2 x 1/4" (0.63 mm)TRS, balanced
Outputs: 4 x Binding post
2 x Speakon | | Indicators | Signal, -20 dB, 10 dB, limit, thermal | | Protection | Short circuit, open circuit, thermal, RF protection
Load protected against DC faults | | Display | 2 x 16 character LCD | | Modes | Manual mode, 2 full range, mono 2-way, sub/sat, 2 subs | | I/O | Stereo, mono A+B dual, mono A+B link, parallel A dual, parallel A link | | Digital | Dynamics Function: Filter, crossover, gain offset, EQ, limiter
Digital Delay Function: Max 20 ms per channel | | Digital Equalizer | Function Per Channel
fO: 1/12 octave at 20 to 20 kHz
Gain: ± 12 dB
Q: 0.5 to 5.0
Presets: DJ, vocal, live sound, install, rock, dance and jazz | | Setup | Lock controls with code, factory reset | | Dimensions (L x W x H) | 19 x 13 x 3.5" (482 x 330 x 88 mm) | | Weight | 26.4 lb (12 kg) | | Box Dimensions (LxWxH) | 22.13 x 16.54 x 7.28" | |
The user manual for the Samson SXD3000 Power Amplifier with DSP SXD3000 can be downloaded in .pdf
format if it did not come with your new power amplifiers, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other Samson users keep a unique electronic library
for Samson power amplifierss,
where you can use our link to download the user manual for the Samson SXD3000 Power Amplifier with DSP SXD3000.
The user manual lists all of the functions of the Samson SXD3000 Power Amplifier with DSP SXD3000,
all the basic and advanced features and tells you how to use the power amplifiers.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from Samson service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the Samson SXD3000 Power Amplifier with DSP SXD3000. User manuals are also
available on the Samson website under Pro Audio - Live Sound - Power Amplifiers.
Question and answer discussion forum concerning user instructions and resolving problems with the Samson SXD3000 Power Amplifier with DSP SXD3000 - no comments have been made yet - be the first to add a comment
Post new comment/question/response regarding the Samson SXD3000 Power Amplifier with DSP SXD3000
|
|
|
|
|
